what happens if i cut a golf club down 2 inches

Full Answer

What happens when you cut off an inch from a golf club?

For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club.

Why do golfers cut down shafts and reinstall them?

But some do-it-yourself golfers also cut down golf shafts, then reinstall them in their clubs. They do this to make their clubs better fit their swing, which might mean cutting the shaft simply to change length, or to change swingweight, flex or other playing characteristics.

How do you shorten a golf club by 2 inches?

Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter. You may need to have the lie angles readjusted after shortening them. Remove the grip using a utility knife with a hook blade. Remove the grip tape from the shaft.

How much swingweight do you lose when you cut the clubhead?

For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club.

How much can u cut a golf club down?

Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.

Is it OK to cut down golf clubs?

Golf clubs are often sold in a “standard” length, which is relative to each club. However, golfers differ in height and arm length, so sometimes the length of a club must be adjusted. Not only can golf clubs be lengthened for people who need it, but they can also be shortened.

What happens when you shorten a golf club?

1:403:54How Does Butt Trimming a Golf Shaft Affect Playability? - YouTubeYouTubeStart of suggested clipEnd of suggested clipToday we're just looking at the butt end. So. First thing is if you cut in one inch off you shortenMoreToday we're just looking at the butt end. So. First thing is if you cut in one inch off you shorten the beam of the club. Which physics will tell you that would make it stiffer. Although in a golf

Should I cut my clubs down?

A golf club is only good for a player when it can be controlled. As soon as control is lost, the distance does not matter, and the player must work on regaining control. If you know your irons are too long for you, but you can swing them well and control them, you don't need to shorten them.

Do shorter golfers need shorter clubs?

Shorter golfers are often better served with shorter clubs, while the lie angle (how the club sits on the ground) may also need tweaking. If your clubs are too long and/or upright, you'll be forced to adjust away from a swing that's natural for you.

Do pros shorten their irons?

Not really. Usually the clubs stop getting shorter above the 9-iron, meaning the various wedges are the same length as the 9-iron. And yet each wedge above the 9 hits the ball less far.

How long should golf clubs be for my height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

Can I cut my irons to one length?

1:2210:28I cut down my long irons - One length irons combo - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the sameMoreSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the same length. So my Wilson V SEC sounds were already an inch longer than standard.

Does length of golf club matter?

When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect.

Does choking down reduce swing weight?

Choking down lightens the club's swing weight and effectively makes the shaft stiffer.” Sadly, Anthony Kim has seemingly left the game forever but Trevino is right about how gripping down affects the club. Choking up does change the weight and makes the club shorter and slightly stiffer.

What happens if my irons are too long?

5 Signs Your Golf Clubs are Too Long You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.

What happens if I cut an inch off my driver?

Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.

How many swingweight points do you lose when you remove 1/2 inch?

For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club.

How does shortening a golf shaft affect swing weight?

Shortening the shaft can make the golf club less flexible. If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.

What is a cycle in a shaft?

the 'cycles' is the reference term to shaft bend profile, shaft frequency - so in effect it's what's generally spoken of in terms of shaft 'stiffness' or 'softness'. if you just cut the butt end & didn't add weight to the head then the shaft would play a tad stiffer not by much though - but the whole club would maybes 'feel' light which could ...

Does the grip on a golf swing affect weight?

That's because the grip will be thinner at the point you grip down to and, , more importantly, the excess will be acting as a very slight counterbalance - which will affect the swing weight - while you are doing so.

Does CPM match irons?

CPM does, however, allow a set of shafts (for irons) to be matched, as the profile of the individual shafts is pretty consistent. This is what 'Frequency Matching', as opposed to 'Weight Matching' is all about. Adding weight to the head will indeed make the shaft feel less stiff.

Does taking a butt off the tip affect flex?

Much more (stiffening) effect if you take it off the tip than off the butt! Taking it off the Butt (the normal method and how it would be done if you simply specified a shorter length) has a marginal effect, while taking it off the tip typically alters the flex by half a flex per inch.

Does adding weight to a shaft make it stiffer?

Adding weight to the head will indeed make the shaft feel less stiff. Again, depending on the amount of weight, this might not be noticeable, but for those who are particularly sensitive, the tape can be added near the ferrule and balanced by some under the grip.

Why does a driver feel lighter when cutting down a golf club?

When you cut down any club, especially a driver, it will feel lighter without any adjustment because you have moved the mass of the club closer to your hands. Just like a fulcrum scale used to measure mass, the closer the mass—in this case, the driver’s head gets to the fulcrum of the scale, the lighter it will “feel” to ...

How to adjust golf clubs at home?

There are a lot of ways to adjust your clubs at home with some simple tools, and one of the easiest jobs for the DIY golfer is cutting down clubs, especially cutting down a driver , and installing a new grip. Cutting down a driver will have a number of impacts including making the driver more accurate because at a shorter length it is easier ...

Why is cutting down a driver important?

Cutting down a driver will have a number of impacts including making the driver more accurate because at a shorter length it is easier to control and make contact in the middle of the face.

Why is the longer driver better?

The longer driver theory works well for stronger and highly skilled players because of their ability to control a longer and heavier club at higher speeds, but for average golfers and most recreational players , this extra length means bigger misses and doesn’t always lead to extra speed —this is why playing a shorter length can help most golfers.

Why cut down a golf club?

In short, cutting down a club leaves less shaft to offset the weight of the club. And since some players -- including many tour pros with their putters -- still cut down clubs, it's important to know how to offset the potentially negative impact. First, clubs should normally be cut from the butt (or grip) end.

What putter did Sergio Garcia use?

Much was made of Sergio Garcia's change to a TaylorMade belly putter prior to the British Open, but at the Tour Championship the Spaniard used a new putter -- a Guerin Rife Barbados model -- to finish fourth. Last week's putter was heel-shafted; the belly model Garcia used at Carnoustie was center-shafted. ... Mark Calcavecchia was down to one putter in Atlanta (he had used a pair in a previous FedEx Cup event). Calc also went with a new driver (a Ping G10) with the same old-school loft (7.5 degrees) he has used all year. ... So with a $10 million annuity on the line, what did __K.J. Cho__i do? Switch to a set of Nike Ignite irons, a lower-priced club that retails for $400 for a set of eight. Fellow Nike staff player Rory Sabbatini won earlier this year at Colonial using the bargain bats. ... Ernie Els gave fans at East Lake a sneak preview of Odyssey's putter line for 2008 when he used a Black Series i3 model. The putter features a new, firmer face insert. ... Those at last week's PGA Fall Expo in Las Vegas got a look at Nike's driver line for next year, including revised Sumo2 and Sumo drivers. The drivers, which won't be available until February, feature a deep face, and the square-shaped Sumo2 boasts a moment of inertia of 5,900 -- highest allowed by USGA rules.

Why is the shaft shorter on a golf club?

Making the shaft shorter makes the club shorter, the shaft stiffer, and it will adjust the swing weight. Your club will have less flex when you remove weight. A regular flex can become stiff, and a stiff can become extra stiff when you shorter it, but that all depends on how much you shorten it. You need to be sure this is what you want ...

Why shorten the shaft on a golf driver?

For some people, shortening the driver shaft can help them to hit the ball farther and keep it in play more. That last part is something that we all want to do.

Why is a shorter driver shaft better?

Pros: A shorter driver shaft will shorten the arc of your swing. This will help you to hit the center of the clubface more often. Hitting the center of the clubface more often means you are more likely to keep the ball in play than you were before.

What does a longer shaft mean?

A longer shaft means a wider arc to your swing and that creates more speed. But hitting the center of the clubface is much more important. A shorter driver shaft means a shorter arc in your swing and that makes hitting the center of the clubface easier. Many players don’t lose any clubhead speed when they shorten their driver shaft by about an inch.

How long is the average driver on the PGA Tour?

On the PGA Tour, the average driver length is 44.5 inches. That’s shorter than the standard 45-46 inches.

Does shortening your driver shaft help?

More practice equals more consistency. Yes, better equipment helps. And equipment that is attuned to your needs helps even more. Shortening your driver shaft could be beneficial for you and combining that with the want to improve is a step in the right direction.

Does shortening a driver shaft make your handicap fall?

Most professional golfers are aware of the benefits that shortening their driver shaft, at least a little, can give them. This doesn’t mean that shorten ing your driver shaft will immediately make your handicap fall. The biggest factor is still your technique and how you play.

How to tell if a golf club is too long?

Below you’ll find common signs that indicate the clubs you’re using are too long: 1 You have to stand up almost completely straight. 2 You’re unable to move your lower body using proper swinging mechanics 3 The ball often flies off to the left and too high. 4 The club’s shaft feels very weak 5 You’re constantly hitting the ball with the toe of the golf club.

How many inches to a standard length golf club?

Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.

What happens if you bend forward too much at address?

If a golfer bends forward too much at address then the club’s shaft will fall below their waistline. If they stand too straight at address then the shaft of the club will hit above their waistline. Ideally, the best way to go about sizing for length is to find a length that maximizes accuracy and distance.

How long is a standard iron club?

Standard Club Sizes. Iron: The one iron club is a little over forty inches in length. Each iron falls half an inch with each size until you reach the nine iron which measures in at a little over thirty-six inches. Differences in irons can also occur due to shaft material.

How long is a golf driver?

On average, most golfers use a driver that’s forty-four inches in length, however, a club shaft up to forty-eight inches in allowed for competitions.

How tall should a golf iron be?

Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.

How long is a three wood putter?

Putter: The standard length of a putter is thirty-four inches, however, the length of a putter is measured much differently than irons. It often depends on the putter’s construction.

What happens if you trim 1/2 inch golf clubs?

Therefore, if you trim a 1/2 inch, you are EFFECTIVELY flattening the lie angle 1/2 degree. If you wish to maintain the current lie angle you must bend the trimmed clubs 1/2 degree upright. If you are only trimming 1/4 inch I wouldn't even consider worrying about it. It's so minimal it's pointless.

Is a wedge shorter than a standard?

Wedges are already very short. Almost no one wants them shorter than standard. If anything, maybe people play them a bit over standard for better posture. I'm 5' 7" and I like my wedges 1/2 over standard.