Shortening the shaft can make the golf club less flexible. If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.
What happens when you cut the tip of a golf shaft?
That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end of the shaft which, in turn, makes the shaft play and feel more stiff.
How much does trim increase the stiffness of a shaft?
"There are some shafts in which trimming an additional one inch from the tip will change the stiffness barely at all, while in other shaft designs a 1-inch additional cut from the tip end will increase the stiffness quite noticeably." Trimming Shafts to Improve Accuracy: Cut from Grip End
How do you shorten a golf club shaft?
With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
What happens if I shorten my driver shaft?
A shorter driver shaft means a shorter arc in your swing and that makes hitting the center of the clubface easier. Many players don’t lose any clubhead speed when they shorten their driver shaft by about an inch. They also usually can hit the center of the clubface more often.
Does cutting a golf shaft make it stiffer?
When you cut off a portion of the softest part of a golf shaft (the tip), it increases the overall stiffness. The handle section of a shaft, on the other hand, is longer and more uniformly stiff, so removing material from the handle does not make such a pronounced difference in overall stiffness.
Can you cut the shaft of a golf club?
Trimming Shafts to Improve Accuracy: Cut from Grip End Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft.
What happens when you butt trim a shaft?
1:363:54How Does Butt Trimming a Golf Shaft Affect Playability? - YouTubeYouTubeStart of suggested clipEnd of suggested clipChange when cutting one inch or less or or more off of the butt end probably. The biggest downsideMoreChange when cutting one inch or less or or more off of the butt end probably. The biggest downside of cutting. Or making a closed shoulder is the effect that it has on swing weight.
Does cutting shaft increase swing weight?
The swingweight increases by one swingweight point for every 9g of shaft weight added. The swingweight decreases by one swingweight point for every 9g of shaft weight removed.
Can I cut down my graphite shaft?
Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise. The model we sell fits on a standard 12” hacksaw frame found at any hardware store or in many home shops.
How much should I shorten my golf clubs?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
Is it bad to shorten golf clubs?
For most golfers, having clubs that are too short will be better than if they're too long, but can still result in inconsistent shots. Clubs that are too short will make you stand bent over, which can cause back pain. You'll also have the tendency to push the ball a lot.
Does shortening a shaft make it stiffer?
A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.
Should I cut my iron shafts?
Instead of stocking individual shafts for every club, the same shaft can be tip trimmed to fit any iron club. In additional to trimming the tip, you'll then need to trim the butt end, to achieve the final desired club length.
How much can you cut off a golf shaft?
If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points.
Should I cut my driver shaft down?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
Will a lighter shaft reduce swing weight?
When a shaft is lighter, it reduces what's known as the total weight of a golf club, which is the weight of all components: the head, the shaft, the grip, and the things that hold them together such as the tip, tape, and epoxy. When the total weight of a club is reduced, it allows some golfers to swing faster.
How do you cut a golf shaft?
0:483:03Golf Tips : How to Trim Golf Club Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing we got to do is determine the length of the golf club we're going to we're going to cutMoreFirst thing we got to do is determine the length of the golf club we're going to we're going to cut and how much we need to cut off of it. So we're going to lay the club.
Can I cut down my driver shaft?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
How do you cut a graphite golf shaft at home?
1:2914:05Golf Club Repair - How To cut a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're gonna if this is going to be your primary cutting tool don't skimp alright I'm a big toolMoreIf you're gonna if this is going to be your primary cutting tool don't skimp alright I'm a big tool nut don't skimp even if it's a hand tool.
Does shortening a shaft make it stiffer?
A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.
Why is the shaft shorter on a golf club?
Making the shaft shorter makes the club shorter, the shaft stiffer, and it will adjust the swing weight. Your club will have less flex when you remove weight. A regular flex can become stiff, and a stiff can become extra stiff when you shorter it, but that all depends on how much you shorten it. You need to be sure this is what you want ...
Why shorten the shaft on a golf driver?
For some people, shortening the driver shaft can help them to hit the ball farther and keep it in play more. That last part is something that we all want to do.
Why is a shorter driver shaft better?
Pros: A shorter driver shaft will shorten the arc of your swing. This will help you to hit the center of the clubface more often. Hitting the center of the clubface more often means you are more likely to keep the ball in play than you were before.
What does a longer shaft mean?
A longer shaft means a wider arc to your swing and that creates more speed. But hitting the center of the clubface is much more important. A shorter driver shaft means a shorter arc in your swing and that makes hitting the center of the clubface easier. Many players don’t lose any clubhead speed when they shorten their driver shaft by about an inch.
How long is the average driver on the PGA Tour?
On the PGA Tour, the average driver length is 44.5 inches. That’s shorter than the standard 45-46 inches.
Does shortening your driver shaft help?
More practice equals more consistency. Yes, better equipment helps. And equipment that is attuned to your needs helps even more. Shortening your driver shaft could be beneficial for you and combining that with the want to improve is a step in the right direction.
Does shortening a driver shaft make your handicap fall?
Most professional golfers are aware of the benefits that shortening their driver shaft, at least a little, can give them. This doesn’t mean that shorten ing your driver shaft will immediately make your handicap fall. The biggest factor is still your technique and how you play.
What is a cycle in a shaft?
the 'cycles' is the reference term to shaft bend profile, shaft frequency - so in effect it's what's generally spoken of in terms of shaft 'stiffness' or 'softness'. if you just cut the butt end & didn't add weight to the head then the shaft would play a tad stiffer not by much though - but the whole club would maybes 'feel' light which could ...
Does the grip on a golf swing affect weight?
That's because the grip will be thinner at the point you grip down to and, , more importantly, the excess will be acting as a very slight counterbalance - which will affect the swing weight - while you are doing so.
Does taking a butt off the tip affect flex?
Much more (stiffening) effect if you take it off the tip than off the butt! Taking it off the Butt (the normal method and how it would be done if you simply specified a shorter length) has a marginal effect, while taking it off the tip typically alters the flex by half a flex per inch.
Does adding weight to a shaft make it stiffer?
Adding weight to the head will indeed make the shaft feel less stiff. Again, depending on the amount of weight, this might not be noticeable, but for those who are particularly sensitive, the tape can be added near the ferrule and balanced by some under the grip.
What does higher ball speed mean?
Higher ball speed means more distance. That’s the equation. And that’s how they’ve been fooling us for years. In fact, testing shows an inch of extra shaft length equals roughly 10 yards in distance. So a driver with a 43-inch shaft vs. a driver with a 45.75-inch shaft – same golfer, same club head, same ball, same shaft type – could equal 20-25 ...
Does a shorter shaft help you find the sweet spot?
Write for us! In fact, a shorter shaft should help you find the sweet spot more often and may even add distance. Who thought the simplest of golf tips could make such a difference. If you can check your ego, you may find lower scores and more 19th hole payouts.
Club Building 101: What happens when you cut down a driver
This video examines how cutting down your driver, without factoring in other variables, can cause it to change flex and not play as it was fit or intended.
WATCH: Talking TaylorMade Spider GT putters with Bill Price
BK talks with Bill Price, TaylorMade’s senior director of putters, about the new Spider GT putters.
Clement: How to stay with your golf shots and stop swaying
Nothing better than being able to stay with your golf shots and create some powerful leverage to apply some compression through your golf shots like smashing through a door with a battering ram! Get a GOLF SWING WITH LAG, POWER AND SPEED!
Clement: Beat the shanks for good
Editor’s note: Shawn is shouting in his caption, so you know it’s good.
wmblake2000
I have a long shaft, too. I choke down on it mainly but haven't cut it because when I am in a groove, I will use the whole length for a little extra pop. (And kudos to me for not typing all the juvenile double entendres that popped in my mind.)
NavyMustangGolf
I choked for a long time, and recently did the cut. I enjoy playing a shorter shaft. I rock the center face much more, and actually saw a distance increase (mostly due to making center face contact). I didnt like choking down because that got the hands on the smaller part of the grip. If you dont mind that, keep the length and choke down.
PowderedToastMan
I put the SLDR TP fairway shaft (Speeder 8.3) in my Jetspeed a while back and I loved it. Now when I buy drivers, I get the stock (cheapest) driver shaft option and get the matching fairway with a souped up shaft. Wish I had done this years ago.
cvvorst
I'm 6'3 and I much prefer my driver at 44.5 inches, but I know plenty of people who are shorter who hit a longer driver better (45.5) I tried choking down on my driver shaft, but eventually got tired of it and cut the shaft down. Didn't notice much difference in weight, and I'm hitting it better. Lead tape can help get weight back up if necessary.
cliffhanger
Trim it down an inch... Play it for a bit... If you do not like the feel... Buy a roll of lead tape... Add 2 inch strips to both the heel and toe area... Repeat the process until you love the feel and you are bombing your driver. Lead tape strips are easy to remove if you add too much and want to dial it back a bit.
Albatross85
Don't do it!!! Played my favorite driver combo of all time at 45" but i always choked down. Recently had 1/2" cut off b/c i thought why not i choke down anyways. Totally ruined the driver for me. Even adding lead tape didnt make a difference. Switched shafts back to something longer and choke down again. Back to hitting frozen ropes.
Will Par
For me, shortening a club a full inch always resulted in a huge difference in feel, basically ruining the club. I learned long ago to never cut more than one half inch if I wanted a shorter club. Even a half inch would result in a noticeable change in feel, but it was a change I could deal with, and a change that was usually sufficient.
Why does a driver feel lighter when cutting down a golf club?
When you cut down any club, especially a driver, it will feel lighter without any adjustment because you have moved the mass of the club closer to your hands. Just like a fulcrum scale used to measure mass, the closer the mass—in this case, the driver’s head gets to the fulcrum of the scale, the lighter it will “feel” to ...
Why is cutting down a driver important?
Cutting down a driver will have a number of impacts including making the driver more accurate because at a shorter length it is easier to control and make contact in the middle of the face.
How to adjust golf clubs at home?
There are a lot of ways to adjust your clubs at home with some simple tools, and one of the easiest jobs for the DIY golfer is cutting down clubs, especially cutting down a driver , and installing a new grip. Cutting down a driver will have a number of impacts including making the driver more accurate because at a shorter length it is easier ...
Why is the longer driver better?
The longer driver theory works well for stronger and highly skilled players because of their ability to control a longer and heavier club at higher speeds, but for average golfers and most recreational players , this extra length means bigger misses and doesn’t always lead to extra speed —this is why playing a shorter length can help most golfers.
What happens when you add weight to a swing?
That is the tricky part. If you butt cut and then add head weight to get back to the original swing weight you will end up with a softer flex than you started with.
Does shortening the shaft stiffen the shaft?
Shortening the shaft will stiffen it no matter which end you cut (not a lot, but maybe enough to notice). Cutting the tip end will stiffen it more than cutting the butt end. It will also bring the swing weight down. To compensate, you have to add weight to the head or put a lighter grip on, or both.
Does shorter shaft play stiffer?
A very simple answer to the OP's question is, Yes, shorter length will make the same shaft play stiffer then " before" the trim, whether trimmed from the tip or the butt. Trimming the same length from the tip will feel stiffer than trimming from the butt end, simply because the thicker the less flex.
What happens if a golf shaft is too flexible?
If a golfer is using a shaft that is too flexible, here are the likely results: 1. The ball will possibly fly higher for any given loft. If the golfer is using the proper loft for his or her swing mechanics, this could cause a slight decrease from ...
Why does a golf shot feel more solid?
3. The shot will feel more solid because impact vibrations transmitted up to the hands along a shaft which is both more flexible and more bent will feel more solid .
How to make sure your shaft flex is well matched to your swing?
The best thing to do is make sure your shaft flex is well-matched to your swing (by meeting with a clubfitter or at least a teaching pro in a hitting bay when buying new clubs). But when in doubt, always err on the side of more flexibility in the shaft.
Why does my golf ball flies lower?
1. The ball flies lower for any given loft, and possibly shorter in distance, because the golfer's best launch angle for maximum distance cannot be achieved. 2. The ball may tend to "leak" to the fade side of the target because the golfer cannot cause the desired forward bending of the shaft at impact, which helps bring ...
Can a golfer's loft decrease?
If the golfer is using the proper loft for his or her swing mechanics, this could cause a slight decrease from the golfer's maximum potential distance. On the other hand, if the golfer is using too little loft, which is the case with a very high percentage of players today with the driver and 3-wood, the more flexible shaft could bring his launch ...
