In this golf shaft design you can see the shaft stiffness turn upward from 11″ toward the tip. The tipped shaft cuts away this stiffness and results in a softer tip than the original design.
What does tipping a shaft do?
What Does Tipping a Shaft Do? - Golf Myths Unplugged - Plugged In Golf What Does Tipping a Shaft Do? – Golf Myths Unplugged What is Tipping and Why Would You Do It? “Tipping” a shaft refers to cutting it from the tip end (where the club head goes) prior to installing the head.
Should you tip your golf shafts?
In most cases, shaft tipping is done to steel iron and wedge shafts but occasionally is done in graphite shafts for woods and drivers as well. Lastly, tipping won’t do much to affect spin rates and launch angle — two popular misconceptions when it comes to trimming the lower end of a shaft.
What does tip trimming mean on a golf club?
“Tipping” or “tip trimming,” as it’s sometimes called, means trimming a club shaft from the clubhead end, not from the grip end where it’s most often cut. What’s the difference between True Temper Dynamic Gold and Dynamic Gold Tour Issue shafts?
What happens if you tip a club from the head end?
If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball. If you cut a club from the butt end then you will make the club shorter and stiffer.
Does tipping a driver shaft lower spin?
Lastly, tipping won't do much to affect spin rates and launch angle — two popular misconceptions when it comes to trimming the lower end of a shaft.
Do any pros use Oban shafts?
A look at the Darrell Survey, which tabulates equipment usage on the PGA Tour, shows players such as Matt Every, Billy Horschel, Jerry Kelly, William McGirt, John Rollins, Kevin Streelman and Vaughan Taylor using Oban. Nobody is paid to play the shaft.
Can you tip an iron shaft?
Instead of stocking individual shafts for every club, the same shaft can be tip trimmed to fit any iron club. In additional to trimming the tip, you'll then need to trim the butt end, to achieve the final desired club length.
What is tip flex of a golf shaft?
Tip Flex: Tip Flex, or Retro Flex, represents the average stiffness toward the head side of the shaft. Sometimes this is measured in a very similar fashion as the static-flex measurement. The difference being that the tip end is clamped and the load is applied to the butt end of the shaft.
Are Oban golf shafts good?
The Kiyoshi shafts by Oban are so smooth. It is not loose in any way, just a tight smooth feeling from take away through impact and release. Not only did this shaft offer great feel and ideal launch conditions, it looks really cool too. The black shaft with the gold bands and purple graphics looks amazing.
Who owns Oban golf shafts?
If you haven't guessed, the company is Oban. Oban was started in June of 2007 by Ralph Reichert and Victor Afable. Previously with Graphite Design International as VP of Sales and Marketing, Afable teamed up with one of his closest friends from his college days to launch the company.
What effect does tipping a shaft?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft's resistance to twisting.
What happens when you tip a golf shaft?
What Is Tipping A Golf Shaft? Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
Does shortening a golf shaft make it stiffer?
A shorter shaft is typically stiffer than a longer one. Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change.
What does soft tipping a golf shaft?
1:0911:44The Purpose of Shaft Tipping - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe more we get into the more we expose this wider. Section from from here on up. So we we take theMoreThe more we get into the more we expose this wider. Section from from here on up. So we we take the soft part away we leave the stiffer part which is up in this butt.
What does a soft tip golf shaft mean?
Well a shaft that has a soft tip has a low bend point and this helps lift the ball in the air by adding dynamic loft. Players who hit the ball too high should look for a tip stiff shaft which does not add so much loft, which produces a lower and more penetrating trajectory.
What does it mean to soft tip a golf shaft?
A tip soft shaft is one that is designed to be more flexible in the tip portion of the shaft which we define as the last 16” to 21” of the shaft. Likewise there can be any number of variations in how stiff the tip section of a shaft is designed.
What are the myths about the shaft?
The Myths. Myth #1 – Tipping a shaft changes the feel. Myth #2 – Tipping a shaft will reduce spin. Myth #3 – Tipping a shaft will reduce launch angle. Myth #4 – Tipping a shaft will improve accuracy.
Does tipping a golf shaft help with accuracy?
Conclusion. If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.
Does a tipped shaft lower spin?
Tipping a shaft, just like choosing a stiffer flex, does not guarantee lower spin. As our players moved from the untipped shaft to the 1/2″ tip to the 1″ tip, two of them did see lower spin. However, two of them registered their highest spin numbers with the most heavily-tipped shaft.
Can you buy accuracy with a stiffer shaft?
You can’t buy accuracy with a stiffer shaft, and you can’t get it by tipping your shaft either. None of our testers saw the 1″ tipped shaft stand alone for accuracy, though two were equally (or near equally) accurate with the 1″ tip and the untipped shaft.
Why do you tip a golf shaft?
Tipping a golf shaft allows players to have more control over their club. It allows players to feel the proper flex and help control their ball flight trajectory. Making the shaft stiffer helps lower torque and lessens a golfers chances of twisting the club at impact which usually results in bad shots.
What does it mean when a golf shaft is tipped?
Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
What happens if you cut a golf club from the butt?
If you cut a club from the butt end then you will make the club shorter and stiffer. If you cut too much length off and shorten the club too much, you will have it stiffer but you might lose distance as well.
How many inches does Tiger Woods cut his driver shaft?
Tiger Woods cut his driver shaft to 42.5 inches at one point in his career when using a True Temper X-100 steel shaft. About 90 percent of all fairway woods are trimmed on the PGA Tour. Woods are commonly tipped three to four inches.
johnnybogey
In desperate need of help. I picked up a pulled set of Oban CT-100 shafts off the bay. Was advertised as 5-AW and playing at standard length. However, when installing, these come out longer. So I'm thinking this is a 4-PW set.
johnnybogey
I think I may have figured this one out but looking for the experts here to confirm.
shellbmb
Even when cut to playing length, they should still have the silver label that shows the discrete length. 40.0, 39.5, 39.0, etc. If those aren't there, you are kind of guessing. And Oban shafts are hard/soft stepped to determine flex. Did they advertise a certain flex? Stiff, stiff plus, x minus, etc?
shellbmb
They are just made in discrete lengths and then hard/soft stepped to flex. If you have just one digit showing (hopefully the first digit), you might still be able to tell. Line them up longest to shortest and find out which one is the 40.0 shaft. And then use the chart from there.
shellbmb
The longest one could be the 41.0 so that would be the 4 iron in the Reg +. That would make sense too.
johnnybogey
Ah ha! That CT 100 chart is super helpful as I assumed both were the same.
What is the biggest misconception about golf shafts?
One of the biggest misconceptions about shafts is that there are standards out there that manufacturers adhere to. Most golfers assume that a shaft marked regular or stiff will be the same across the board, no matter who they buy it from.
Why didn't Nick Price find a stiff shaft?
Regardless of the similarity in their swing speeds, Nick Price couldn’t find a shaft stiff enough for his swing because he would apply such an enormous amount of force, whereas Couples didn’t need as stiff of a shaft because of his smooth tempo.
How much weight should a golf shaft be?
Weight. Getting the correct weight of your shaft is an important factor to consider as well. Shafts can range anywhere from 40 to 135 grams. Typically the rule of thumb is that a golfer with a slower swing speed will benefit from using a lighter shaft, and you would add weight as swing speed increases. As you might expect at this point, there are ...
What is the difference between stock shafts and aftermarket shafts?
The difference between stock shafts and aftermarket shafts is usually found in quality control. Many times the bigger OEMs will strip off the paint of last year’s model and give them a new exterior. The graphics look attractive, but you really have no idea what is beneath it.
Why is shaft profile important?
Getting the right shaft profile for your swing is very important. It will greatly affect your ability to hit quality shots on the course . There is a lot of confusion in the golf shaft industry. With no standards for performance, the quality greatly varies, and often you get what you pay for. We hope that we have cleared up some ...
What is the most important thing about a driver shaft?
One of the most important things about shafts is how they handle the force that a player’s swing will apply. Generally speaking, there are two extremes. Some players apply a late load to their swing, which would require a stiffer tip of the driver shaft. Conversely, a player that extends early in their swing (most recreational golfers) ...
Is the shaft of a truck the same as the transmission?
It absolutely has an effect on how well you can play. The shaft is similar to the transmission of a car. While it’s not the engine, it’s still extremely important. If you are driving a truck you want a transmission that can handle its particular demands.
What is a tip soft shaft?
A tip soft shaft is one that is designed to be more flexible in the tip portion of the shaft which we define as the last 16” to 21” of the shaft. Likewise there can be any number of variations in how stiff ...
When to unhinge wrist cock?
Most typically, golfers who unhinge the wrist-cock angle early to early/midway in the downswing are better fit with tip soft shafts, while golfers who hold the wrist-cock angle until very late in the downswing are better fit with a tip stiff or tip firm shaft. Those who unhinge the wrist cock somewhere in between early and late then are typically ...
What Is Tipping and Why Would You Do It?
The Myths
- Myth #1 – Tipping a shaft changes the feel Myth #2 – Tipping a shaft will reduce spin Myth #3 – Tipping a shaft will reduce launch angle Myth #4 – Tipping a shaft will improve accuracy
How We Tested
- For this test, we brought together five golfers with handicaps ranging from 10 to +3. Each player hit five drives with each of three shafts. One shaft was untipped, one was tipped 1/2″, and one was tipped 1″. The shaft used was the Nippon Regio Formula B. Each shaft was built to the same finished length and swing weight. All testing was done at and with the help of Club Champion
The Results
- Tipping a shaft unequivocally changes the feel. All five of our testers noticed a difference, though some were more sensitive to it than others. Despite not knowing which shaft they were testing, each one identified the feel as you would expect: the untipped version felt the softest, the 1″ tipping felt the stiffest. If you like the shaft you’re playing but want a stiffer feeling, tipping it sho…
Conclusion
- If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.