So here’s the general iron shaft length chart:
| IRON | SHAFT LENGTH for Men (steel/graphite) | SHAFT LENGTH for Women (steel/graphite) |
| 2-iron | 39.5/40 inches | 38.5/39 inches |
| 3-iron | 39/39.5 inches | 38/38.5 inches |
| 4-iron | 38.5/39 inches | 37.5/38 inches |
| 5-iron | 38/38.5 inches | 37/37.5 inches |
| IRON | SHAFT LENGTH for Men (steel/graphite) | SHAFT LENGTH for Women (steel/graphite) |
|---|---|---|
| 5-iron | 38/38.5 inches | 37/37.5 inches |
| 6-iron | 37.5/38 inches | 36.5/37 inches |
| 7-iron | 37/37.5 inches | 36/36.5 inches |
| 8-iron | 36.5/37 inches | 35.5/36 inches |
What is the best golf shaft for Irons?
10 Best Golf Shafts 2020
- New Integra SoooLong Ultralite 45 g Graphite Shaft – Best Golf Shafts 2020. Fully covered with Aldila shaft warranty when you purchasing this shaft. ...
- Pro Taylor Fit Nano – Best Golf Shafts 2020. ProMade Irons provides a stiff tip section for optimal launch and spin control, with a very firm butt section for ...
- Accuflex Vizion Ultralite White 55g Golf wood shaft – Best Golf Shafts 2020. At 55 grams, the Vizion is the lightest shaft of the AccuFlex “ Clb Builders” series. ...
What is the standard length of golf irons?
The measurement can vary between manufacturers, but most are around 38″-41″ inches long for men’s irons, 33-34″ inches long for women’s iron sets, and 28-33″ inches for junior models depending on age.
What is the Standard Shaft length for Irons?
You can follow these steps to determine the shaft length for irons. Stand straight against the wall and get someone to measure your height. If your height is between: The standard length of a three iron is 38.75 inches, five iron is 37.5 inches, seven iron is 37 inches, and 9 iron is 35.5 inches.
What is the standard golf shaft length?
Length of Shafts According to Height in Golf
- Charting the Right Height. To determine the approximate length of clubs that are right for your height, you need to know how tall you are and how far your wrists ...
- The Tall and Short of It. ...
- Drivers and Other Clubs. ...
- Roughly the Right Height. ...
What golf club shaft length should I use?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
What is the standard shaft length for an iron?
With steel shafts, the standard length of a 5 iron golf club is 37.5 inches. With a graphite shaft, the standard length for men is 38 inches and for women, it stands at 37.25 inches. A 5 iron golf club usually offers a 28-degree loft angle.
How do I know what length my irons should be?
For example, for a golfer that stands 6'2” and has a wrist-to-floor of 39”, the recommendation for proper club length would be 1/2” longer than standard length.
How do you determine Golf Club length?
To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor. Measure from the floor to the end of the Grip. Before we use the chart below, it is important to know your height and your wrist-to-floor measurement.
Should I shorten my long irons?
A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.
What is standard club length?
All clubs, including putters, must at least 18 inches long. Putters with straight shafts are measured from the top of the grip to the sole, directly down the shaft.
How long is a standard 7 iron?
The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite.
How do you know if your golf clubs are too short?
6 Signs Your Golf Clubs are Too ShortYou need to bend too much at the waist before swinging.You also have to bend your knees pre-swing.You keep hitting the ball with the golf club's heel.The swing path is in to out.The tempo is too quick.The ball tends to veer off to the right.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Does golf club length matter?
Golf club length matters a ton. If you’re holding proper form, where your back and arms are straight and your core is engaged when you swing, then you’re doing all that you can on that front. When you swing the club, it’s supposed to effortlessly collide with the ball and send it flying.
Is a wood longer than an iron?
All of your woods are likely longer than all of your irons. While the iron is meant for distance, the wood is meant for height. When you’re standing in position and the ball is directly in front of you, the angle of the wood sends the ball through the air better than any other club type.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
How to determine the length of a golf club?
To determine the approximate length of clubs that are right for your height, you need to know how tall you are and how far your wrists hang from the floor. As Golf Components explains, you can obtain your wrist-to-floor measurement by standing on a hard, level surface in regular shoes or golf shoes. Relax your shoulders and let your arms hang down.
How long is a 5 iron?
Clubs other than drivers gradually get shorter -- if a 44-inch steel shaft driver is indicated by the chart, your 5-iron will measure 38 inches and sand wedge 35.5 inches. Graphite clubs are slightly longer, with a standard driver at 45 inches, 5-iron at 38.5 inches and a sand wedge 36 inches. Standard club lengths for women are one inch shorter ...
What happens if your golf clubs are too short?
In fact, if your clubs are too short or too long, expect to spend lots of time in the rough, bunkers and water hazards, if not out-of-bounds. As club equipment guru Tom Wishon explains, the length, loft, lie of your clubs are critical factors in determining how far and high your shots will fly.
Golf Club Size Factors to Consider
When buying a golf club, shaft length is one of the most crucial factors that you need to consider. You don’t want your club to be too long or too short for you. Otherwise, you’ll be forced to adapt, which can cause issues with your swing due to settling for an incorrectly-sized club.
FAQs
You can certainly play using a driver that’s too long for you. However, there are several reasons why you shouldn’t, especially if you’re concerned with your performance.
Key Takeaways
Always keep in mind that the optimal size of your golf club isn’t just about the length of the shaft. While length is essential, grip size is equally significant when looking for the ideal golf club for you.
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
What happens if a golfer has a short club?
If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.
What does a professional club fitter do?
Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:
Why is playing with clubs too short bad?
Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.
Why are golf clubs not fitting?
Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.
Does a longer shaft mean faster club head speed?
A simple analysis of the physics of the golf swing makes it clear that, all things being equal, the longer the shaft, the faster the club head speed. Put another way, a longer shaft will generate more distance than a shorter shaft.
Does trimming the tip of a golf shaft increase flex?
Trimming from the tip end of the shaft, on the other hand, will have much more of an effect on flex and would therefore only be recommended if the goal is to also stiffen the shaft. As an example, tip trimming could potentially result in increasing the flex from Regular to Stiff, or from Stiff to Extra Stiff.
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
What is plus and minus golf clubs?
The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...
What is the second measurement of a grip?
The second measurement is the length of your middle finger from the tip to its base. When you have these two measurements, you can then find the appropriate grip size on a manufacturer’s size chart. Note that we only use the middle finger as an example as it applies to most people.
Can you play golf with an off size club?
Because there are plenty of variations, it’s unsurprising that a lot of people sometimes play with off-size clubs. Most pros recommend that even beginners should opt for a perfectly sized golf club in order to have the best learning experience.
Charting The Right Height
The Tall and Short of It
- A standard golf industry chart, such as the one found at The Club Shack, applies your wrist-to-floor measurement to your height to generally determine the length of the clubs that fit you best. For example, if you are 6-feet tall and your wrist-to-floor measurement is 35 inches, a standard length driver -- 44 inches for a steel shaft driver and 45 inches for a graphite shaft driver -- woul…
Drivers and Other Clubs
- Clubs other than drivers gradually get shorter -- if a 44-inch steel shaft driver is indicated by the chart, your 5-iron will measure 38 inches and sand wedge 35.5 inches. Graphite clubs are slightly longer, with a standard driver at 45 inches, 5-iron at 38.5 inches and a sand wedge 36 inches. Standard club lengths for women are one inch shorter th...
Roughly The Right Height
- The height and wrist measurement charts used to determine club length are a crude instrument that doesn't take into account your posture, swing speed or a number of other factors. The best way to get precisely the right length clubs for your particular height requires a professional club fitting. As Paul John Newport explains in "The Wall Street Journal," club fitting helps both high-h…