What do the numbers on golf clubs mean?
Now that you are more familiar with the types of golf clubs, what about the golf club numbers? Golf club numbers refer to the loft, which is the angle of the golf club face. When you adjust the loft, you are changing the height and distance the golf ball will travel when struck.
What is an a-wedge in golf?
As already noted, A-wedge itself is just another name for the gap wedge, a club known by more different names than any other modern club in golf: gap wedge, a-wedge, attack wedge, approach wedge.
What are the Golf Club distances by number and type?
What Are The Golf Club Distances by Number and Type? 1 2 Iron – The golf ball will travel far, not as high 2 9 Iron – The golf ball will travel very high, but not very far 3 3 Wood – The golf ball will travel farther 4 5 Wood – The golf ball will travel higher
What length golf clubs should I use for my junior golfer?
If you have a particularly tall junior golfer that measures closer to standard length clubs, the best option could be a to use standard length clubs but with a lighter shaft (perhaps a senior flex shaft). If you are unsure that you have the correct length for your junior golfer, consult a certified fitter.
What is a 0 iron in golf?
That's an old joke, but now it's got a new twist. John Daly has invented the zero-iron. It's not only got less loft than a 1-iron, it's got less loft than a putter. You might as well try to get a golf ball airborne with a sledgehammer. And if God can't hit a 1-iron, he's got no chance to hit a zero.
What is the lowest degree golf club?
Driver Loft | 9 to 12.5 Degrees With the exception of putters, drivers are the lowest lofted golf clubs.
What do numbers on golf clubs mean?
Golf club numbers refer to the loft, which is the angle of the golf club face. When you adjust the loft, you are changing the height and distance the golf ball will travel when struck.
What are the 4 main types of clubs in golf?
In fact, today, there are five categories of clubs: woods (including the driver), irons, hybrids, wedges and putters.
What degree is a driver?
The least-lofted golf club, other than a putter, is the driver. Drivers are typically lofted between 8 and 11 degrees, so drivers with lofts of 9.5 and 10.5 degrees are common.
What loft is a driver?
Most drivers come in degrees of loft from 8.5 to 16. Long Drive competitors have drivers that have only 4 to 7.5 degrees of loft. This is because at higher ball speeds, there is considerably more lift created which allows the ball to climb rapidly after impact.
What number club is a driver?
The most common set of men's clubs is: A driver, usually numbered a 1-wood regardless of actual loft, which varies from 8° up to 13° A fairway wood, typically numbered a 3-wood and lofted about 15° (though 2- and 4-woods are sometimes seen)
What does P mean on a golf club?
Instead that have letters such as P or PW for pitching wedge and S for sand wedge. The sand wedge, gap wedge and lob wedge might also be identified by the degrees of loft.
How far should an average golfer hit a 7 iron?
145 yardsThe average golfer hits their 7 iron 145 yards, but the average distances will vary between 128 and 160 yards. Golfers in their 20s typically hit the ball the longest, and the distance tends to decrease as the golfer gets older.
What does G mean on a golf club?
What degree is a Gap Wedge? A gap wedge has a loft of 50 – 52º. Golfers tend to hit a gap wedge 75 – 100 yards. This club is also known as a 'G wedge”, so if you are curious a G wedge also has a loft of 50 – 52º.
What does W mean on a golf club?
The term "pitching wedge" is now used by virtually all manufacturers and players to describe this club; Karsten Manufacturing (maker of the PING brand) simply labels their pitching wedges "W" for "wedge".
What are the 3 most used golf clubs?
The 3 most vital clubs are the driver, putter, and wedge, in that order. If you were to look at pro golfers then I'd probably say that order is right.
What is wedge golf?
The wedges are the highest-lofted golf clubs. They are used for shorter approach shots into greens, for chips and pitches around greens, and for playing out of sand bunkers.
What is putter used for?
Putters are used for, well, putting . They are the clubs golfers use on the putting greens, for the last strokes played on a golf hole - for knocking the ball into the hole. There are more varieties of putters on the market than any other club. That may be because choosing a putter is a very personal process.
What is the loft of an iron?
Irons have angled faces (called "loft") etched with grooves that help grip the golf ball and impart spin. They are generally used on shots from the fairway, or for tee shots on short holes. As the number of an iron goes up (5-iron, 6-iron, etc.), the loft increases while the length of the shaft decreases. Meet the Hybrids.
What is a wood golf club?
The category of golf clubs called "woods" includes the driver and the fairway woods. (They are called woods even though their clubheads are no longer made of wood.) The woods are the clubs with the largest heads (typically hollow, extending a few inches from side-to-side and a few inches from front to back, with rounded lines) ...
How long is a mallet putter?
Lengths: Standard-length putters, often referred to as "conventional putters," range from around 32 to 36 inches long, from one end to the other.
What is the difference between a heel toe and a mallet putter?
Heel-toe putters have the same general shape as blades , but with extra weight at the heel and toe to add perimeter weighting, and with other design tricks to help make the clubs more "forgiving" on mishits. Mallet putters have large clubheads that maximize that forgiveness of poor contact.
What are the names of old golf clubs?
Names of Old Golf Clubs. Golf clubs have changed quite a bit over the long history of the sport. There used to be clubs with names like mashie and niblick and jigger and spoon.
Why do golfers use clubhead covers?
Most golfers use clubhead covers to protect their driver and fairway woods from damage sustained in their golf bag. These covers are always marked with corresponding numbers so that even when a clubhead is covered, you can still identify the club with ease.
What are the numbers on golf clubs?
Numbers. The numbers stamped or marked on the heads of golf clubs relate to the club's loft. Fairway woods and irons are the clubs that are always stamped, although specialty clubs also carry some form of identification. A 4-iron, for example, has less loft than a 9-iron.
Why are golf clubs stamped with a number?
Clubs are labeled clearly for identification. Most golf clubs are stamped with a number as a means of identification. Although experienced golfers are often able to differentiate between their clubs simply by viewing their size, shape and loft of their clubface, the number helps make this distinction certain.
What does 9.5 mean on a golf club?
A driver, however, usually has a number such as 9.5 or 10.5 to indicate the loft of the club. Drivers are available in a variety of lofts. Wedges typically don't have numbers. Instead that have letters such as P or PW ...
Where is the number on a fairway wood?
In most cases, the number displayed on a fairway wood or iron is always in the same place. On fairway woods, this number is often on the bottom of the club so that it's visible when the club is in your bag. Numbers stamped on irons are usually found on the bottom of the club for the same reason, but some manufacturers display this information on ...
Do sand wedges have numbers?
Wedges typically don' t have numbers. Instead that have letters such as P or PW for pitching wedge and S for sand wedge. The sand wedge, gap wedge and lob wedge might also be identified by the degrees of loft. The sand wedge, for example, might say "56" for 56 degrees of loft, rather and "S." Putters also are not marked with a number because ...
Who is William McCoy?
Toronto-based journalist William McCoy has been writing since 1997, specializing in topics such as sports, nutrition and health. He serves as the Studio's sports and recreation section expert. McCoy is a journalism graduate of Ryerson University.
What is the last club on the golf list?
The last club on the list is a putter, and I am sure if you are on a golf site then you have heard of one. The putter is used on the green and is the last club that you will use on every hole in most cases.
What is a hybrid golf club?
A hybrid is a type of golf club that has become popular relatively recently and it is a mix between a wood and a long iron. The point of them is to be more forgiving and able to use in rougher lies compared to woods.
Why are woods used in golf?
The first reason is that they are great off of the tee if a golfer is struggling to keep their driver straight. The second reason that woods ae used is that they hit the ball a bit shorter than a driver, so there are situations for it. The third reason is that they can be used in the fairway if you are a long way out.
What is the range of mid irons?
The next category of irons is the irons in the range of 5 to 7. Mid irons are common clubs that golfers use on par 3’s and approach shots with 160 yards. That number can fluctuate greatly depending on how much power a golfer has.
What is the distance of a pitching wedge?
A pitching wedge is a wedge with the lowest loft, meaning that it has the farthest distance. A typical male golfer hits a pitching wedge 110 yards. For women, the average distance is more like 90 yards ( source)
Why do you tee the ball up for a driver?
The reason that you tee the ball up for a driver is that the sweet spot is higher up off the ground and no touching the ground. The driver ball flight is usually medium to high in trajectory and rolls out very nicely.
What woods are in a golf bag?
A wood can be a 1-wood all the way up to a 7-wood. But, the most common woods that you are going to find in a golf bag is a 3-wood and a 5-wood.
What are lob wedges called?
Beginning in the latter stages of the 20th century, lob wedges (sometimes called X-wedges) ...
What is an A wedge?
The A-wedge is a golf club that is another name for a gap wedge, which is used for shorter and softer shots, and one of the four main types of wedges, which include (from least loft to most loft) the pitching wedge, A-wedge, sand wedge and lob wedge.
How to identify a wedge in golf?
A golf club manufacturer might identify an A-wedge by stamping an "A" or "AW" on the sole near the toe of the club, but it's becoming more common all the time to stamp the wedge's degrees of loft there. The "a" in A-wedge stands for either "approach" or (less commonly) "attack," and you might see a manufacturer use one of those names ...
What does the A in a wedge mean?
The "a" in A-wedge stands for either "approach" or (less commonly) "attack," and you might see a manufacturer use one of those names ( approach wedge or attack wedge) instead of A-wedge. As already noted, A-wedge itself is just another name for the gap wedge, a club known by more different names than any other modern club in golf: gap wedge, ...
Who is Brent Kelley?
Brent Kelley is an award-winning sports journalist and golf expert with over 30 years in print and online journalism. The A-wedge is a golf club that is another name for a gap wedge, which is used for shorter and softer shots, and one of the four main types of wedges, which include (from least loft to most loft) the pitching wedge, A-wedge, ...
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
Where is Jackson Lewis?
Based in Memphis , Jackson Lewis has been writing on technology-related material for 10 years with a recent emphasis on golf and other sports. He has been freelance writing for Demand Media since 2008. Lewis holds a Master of Science in computer science from the United States Naval Postgraduate School.
Shaft Frequency
The concept of using shaft oscillation frequency was discussed in the 1968 book, “Search for the Perfect Swing” by Alastair Cochran and John Stobbs. “Search for the Perfect Swing” is one of the first explorations of golf technology.
Shaft Stiffness Labels – LARSX
Most shafts have a stiffness label. These labels are referred to as LARSX by club makers, Ladies, Amateur, Regular, Stiff, X-Stiff. As we all know, there is no standard for assigning stiffness between manufacturers.
Conclusion
Back to the question posed in the opening sentence of this article, How stiff is this golf shaft? The systems we have to rate golf shaft stiffness do not work across brands or even across models within brands. Most experienced club fitters use their experience to understand golf shaft stiffness.
What is shaft flex?
Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), ...
What is the shaft of a golf club?
Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job.
How long is a 0.370" iron shaft?
decreasing in length from #3-PW). 0.370" parallel iron shafts arrive in uncut lengths, usually 41" or 42" for irons or 46" or more for woods.
What happens if you swing too heavy?
If the overall club is too heavy, you can lose swing speed which can result in a loss of yardage. Too light of a club will be hard to guide and control which can lead to mishits. Players with faster swing speeds or more accelerated tempos can benefit from heavier shafts.
How to determine golf shaft flex?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
