GROOVED [SWING] When a player is swinging the club so well, so consistently, it is said that his/her swing is grooved. The analogy here is that the path of the club through this player's swing is so repeatable that it seems like the club is sliding down an imaginary groove from which it cannot deviate.
Full Answer
What are the grooves on my golf clubs for?
Grooves on your golf clubs primarily are designed to create spin when the ball is struck properly. Grooves on golf club faces are there primarily to impart spin to the ball.
Do grooves on a golf driver affect spin?
For dry conditions, a driver without grooves will generate similar amounts of spin. But in wet conditions, the ball will actually hydroplane off the face because there’s no escape route for the water.
Why are the grooves on a golf ball so deep?
The only reason for grooves to be deeper and wider is to let more water and dirt into the grooves. But I would think that there would reach a point in the width of the groove that would make the golf ball impossible to control. If the grooves were too deep than so much more dirt would eventually settle over time.
How important is groove shape/geometry on particular clubs?
The more loft on the club, the more important the groove. How are you changing groove shape/geometry on particular clubs? Most manufacturer websites have cross-section images on the groove patterns which control the wall angle, edge radii, separation, depth and several other variables.
How do you make a groove swing?
0:080:59Hank Haney: How To Groove Solid Contact - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you want to try to feel always bend. For from your hips. Keep that angle the same as youMoreSo what you want to try to feel always bend. For from your hips. Keep that angle the same as you turn back then you'll know that you're turning on your axis.
What are grooves in golf clubs for?
Golf club grooves have the exact same function as the treads on a tire. They allow water and debris to move away from the ball's point of contact to provide cleaner contact with better control. Striking a ball from the rough can be unpredictable when there is a lot of debris between your club and the ball.
How do I make my golf swing more consistent?
7:2411:13How You Can Get A Consistent Golf Swing - YouTubeYouTubeStart of suggested clipEnd of suggested clipBuild good alignment double check the grip. Check the club face early on work on finding this niceMoreBuild good alignment double check the grip. Check the club face early on work on finding this nice neutral delivery.
How do you groove an inside out in golf?
3:318:54An Easy Way To Create an Inside Out Swing Path - YouTubeYouTubeStart of suggested clipEnd of suggested clipI. Want you to actually turn your hips a little bit when you're doing this or close your hips. So asMoreI. Want you to actually turn your hips a little bit when you're doing this or close your hips. So as I line up here not only do I want my hips in front.
Should a driver have grooves?
0:201:27What Are Grooves on Your Driver For? - YouTubeYouTubeStart of suggested clipEnd of suggested clipTaking grooves out will help them do that really get the best distance with the most durability.MoreTaking grooves out will help them do that really get the best distance with the most durability.
Do golf drivers need grooves?
It completely depends on the loft of the club and playing conditions. For dry conditions, a driver without grooves will generate similar amounts of spin. But in wet conditions, the ball will actually hydroplane off the face because there's no escape route for the water.
How do you make solid contact every time in golf?
22:1229:09Consistent Delivery For Solid Contact Every Time | Simple Drills - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what i want you to do to fill. This is just swing the club four or five times with just yourMoreSo what i want you to do to fill. This is just swing the club four or five times with just your right hand. And feel like you pull up on the club.
How long does it take to develop a consistent golf swing?
If you're hoping to immediately get out onto the course and start swinging with ease from day one, you might be in for a nasty surprise. It can take up to six months for a beginner to even master hitting the ball the right way. Yes, you read correctly, six months.
Why is my ball striking so inconsistent?
A proper grip specific to you is the source of a square club face. A club face that is overly open or closed will cause a golfer to have to make a compensation within their swing and these two wrongs that can occasionally make a right, will lead to inconsistency.
Why should you shallow the golf swing?
When you begin to shallow out your golf swing, you can generate so much more power and hit the ball much more consistently. Shallowing the club will also help with driving distance and most likely accuracy as well.
Where do you hit your eyes when hitting a golf ball?
If you're continually hitting the ground before the ball, focus your eyes on the front edge (target side) of the ball during the swing. It may not seem like much—the diameter of the golf ball is just 1.68 inches—but shifting your sight line forward even this small amount nudges your center of gravity toward the target.
What swing path causes a slice?
A slice happens when a sidespin is put on the ball, causing it to curve to the right for a right-handed player and to the left for a left-handed player. Sidespin to the right is caused when the clubface is open (pointed right) relative to the path the club is traveling as the club impacts the ball.
What are grooves on golf clubs?
By Don Patton. Grooves on your golf clubs primarily are designed to create spin when the ball is struck properly. Grooves on golf club faces are there primarily to impart spin to the ball. They also channel water and foreign material away from the clubface, especially for shots from heavy rough. The larger grooves on some irons allow players ...
Why do golf clubs have grooves?
Grooves on golf club faces are there primarily to impart spin to the ball. They also channel water and foreign material away from the clubface, especially for shots from heavy rough.
How wide is a clubface groove?
The cross section may be U- or V-shaped as long as it is symmetrical and the sides don’t converge or have sharp or raised edges. The dimensions of each groove are limited to 0.035 inch wide and 0.020 inch deep. The required minimum spacing is three times the groove width and no less than .075 inch.
How much less spin on golf shots?
This means 30 percent to 50 percent less spin on shots hit from the rough with very little effect on fairway shots.
Where is Jordan Spieth's golf tournament?
The event is at the famous Firestone CC in Akron Ohio which requires straight driving and puts a premium on wedge play into tricky greens. All great golfers know their own game. Jordan Spieth is not a long hitter compared to his fellow young guns. He drives the ball 291 yards on average which is 82nd on Tour.
Do grooves work on golf clubs?
The grooves only help when there is interference between the ball and the club face (grass, water, etc...). That's when the grooves kick in and do their thing. And different groove shapes do it better than others, hence the controversy. But they all work great.
Do you need a club face groove on a fairway lie?
From a good lie in the fairway, the wedge grooves do little or nothing to improve spin or stopping power. Club face grooves are essentially not needed from a clean, fairway lie. Depending on what you can do with your regular wedge, the smooth faced wedge can make the ball bite, back up, skid to a stop, etc...
Why do golf clubs have grooves?
Essentially, the reasons why golf clubs have grooves on the face is to allow water and debris from the ball and your lie as a place to go. If you were to hit a ball that was wet from the rain, at the moment of compression the water and debris would transfer from the ball to the club face and through the grooves.
What is a V groove?
Instead, “V” grooves are the only type of groove allowed on any club of 25 degrees or more.
Why did the pros change the rules in the rough?
Apparently, they changed the rules because whenever the pros were hitting from the “rough” they were still able to get an insane amount of spin on the ball. The “U” shaped grooves in combination with sharp edges made it possible for the player to have better control of the ball while in the rough.
Why sharpen grooves?
Sharpening your grooves doesn’t make sense to me, the only reason one would sharpen their grooves is if they thought the grooves made ball spin better. But the grooves don’t make the ball spin so I would say no. On the other hand, you could sharpen your grooves if you had a small dent or blemish near the grooves.
What does a new wedge look like?
New wedges have these small grooves around the entire face of the club. It almost resembles a giant thumbprint on the face of your club. I’m assuming these are for better grip on the ball but this shouldn’t be the case for the reasons stated above.
What would happen if you didn't clean golf ball grooves?
If the grooves were too deep than so much more dirt would eventually settle over time. If you didn’t clean the grooves it would probably be extremely difficult to remove.
What happens if a golf ball is wet?
If a wet golf ball compresses against a clean club face with grooves, the water has a place to go. Even if it’s the tiniest amount of water, it still needs a place to go or the ball probably won’t compress properly. You won’t hit your target at the very least.
What is the function of grooves?
In layman’s terms, they create spin which generates drag and lift force for the golf ball. The ball needs a certain amount of spin and speed to maintain a controlled flight and grooves are one of the critical variables. It’s the complete opposite of the downforce generated by Formula One cars.
How would a wedge perform without any grooves?
A wedge without grooves will generate a flop-shot-like trajectory, only with less control. The ball will effectively slide up the face in both wet and dry conditions. Out of a bunker, however, a wedge with or without grooves will behave in almost exactly the same way.
What about a smooth-faced driver?
It completely depends on the loft of the club and playing conditions. For dry conditions, a driver without grooves will generate similar amounts of spin. But in wet conditions, the ball will actually hydroplane off the face because there’s no escape route for the water.
Do you need to keep grooves clean?
Clean grooves are critical as it reduces the chance of fliers. While a flier 7-iron might impress your mates, it will probably leave you with a nasty chip to try and save par. Research shows that you can lose up to 1,300 RPM of spin if you don't keep your grooves clean.
Would you use a groove sharpener?
The negatives far outweigh the positives. Firstly, it could cause the iron to prematurely rust, albeit this is dependent on the finish and metal type. Secondly, the tolerances on the USGA protocol are extremely tight and overuse could make scorelines illegal.
When do you know if your grooves are worn out?
Watch for fliers. If you start to notice the ball is flying higher and longer, it could be a sign the grooves are going.
