In general, the 13 wood replaces the number 6 iron. Both clubs have a loft of between 30 and 35 degrees, but that is where the comparison ends. The 13 fairway wood is hit with more of a sweeping motion while the iron is hit with more of a descending blow.
Full Answer
How many irons in a set of clubs?
You can generally buy iron clubs in a set of 6-8 of individual irons. In a typical iron set, you get: You might get confused when you read the specification on an iron club set. But here is an easy way to know what you are getting in that set.
What are iron golf clubs used for?
Iron golf clubs are used after teeing off; you can recognize them by the extreme angle of the club heads. Every golfer has more iron clubs than any other golf club in their bag!
What are players irons and should you buy them?
Players irons can take on the design profile of cavity backs or muscle backs, but they typically don’t lean towards the blade profile. Players irons provide a smaller amount of forgiveness because if you’re playing these you can consistently find the middle of the club face.
Should you replace your 6 iron with a number 13 fairway wood?
Replace Your 6 Iron with a Number 13 Fairway Wood: For some golfers who do not feel comfortable hitting an iron, the solution is to fill your bag with an extended range of fairway woods. Fairway woods can range anywhere from a 2 wood all the way up through a 25 wood. Woods decrease in length and increase in the loft as the number gets higher.
What is a 13 degree golf club?
A 13 degree 3 wood is suitable for those who have a swing speed of over 100mph whereas a 15 degree 3 wood is ideal for those with lower swing speed. A 13 degree 3 wood has a lower trajectory and launch than a 15 degree 3 wood, which makes the golf ball travel a shorter distance with the former club.
What club does a 13 wood replace?
The Thomas number 13 wood is a direct replacement for our standard 6 iron and our 6 hybrid golf club. Works will: with a sweeping golf swing and is very good choice for golfers with a shank problem. More sole size then a number 6 iron for a lower center of gravity.
What degree loft is a 13 wood?
30°Thomas Golf Fairway WoodsClubEquivalent toLofts RH13 Wood6 Iron30°15 Wood7 Iron34°17 Wood8 Iron38°19 Wood9 Iron42°10 more rows
What are the numbered golf clubs for?
Again, breaking it down to its simplest form, the numbers on your golf clubs relate to how far they hit the ball - the lower the number, the further the ball should travel. A club with a #4 on it will hit the ball further than one with a #9 on it.
What is a 13 wood equivalent to in an iron?
A 13 wood is roughly equal to an 8 iron. A 15 wood is roughly equal to a 9 iron. A 17 wood is roughly equal to a PW. A 19 wood is equal to a 48 degree Gap Wedge.
Should I use a 13 degree driver?
A 13 degree driver is likely to suit golfers with both average swing speed and slow swing speed while a 14 degree driver is a good option for those with slow swing speed. Some players experience more carry distance with a 13 degree driver when compared to a 14 degree driver.
What is the most common loft for a sand wedge?
54º – 58ºA sand wedge has a loft of 54º – 58º. A wedge with more than 58º degrees of loft is usually called a lob wedge. Golfers tend to hit a sand wedge 60 – 80 yards.
What is the best loft for a sand wedge?
between 54 and 56 degreesKnow your pitching wedge loft. So generally think about putting in a gap wedge that's 48 or 50 degrees, a sand wedge that's between 54 and 56 degrees, and a lob wedge that's between 58 and 60 degrees. These are general guidelines, make sure you're working with your fitter to get the gapping that works best for you.
What fairway woods replace irons?
The larger club head of a fairway wood compared to an iron makes it easier to achieve more distance without over-swinging. As a rough rule of thumb, a 4 wood would replace a 2-iron, a 5 wood the 3-iron, a 7 wood the 4-iron and a 9 wood the 5 iron.
What do iron numbers mean?
1:1610:02What do the numbers on my golf clubs mean? [Beginners Guide] - YouTubeYouTubeStart of suggested clipEnd of suggested clipChanges the height or basically the distance the golf ball will travel when stroke now a really goodMoreChanges the height or basically the distance the golf ball will travel when stroke now a really good way to think of irons is to have a scale. Like this from one to 12.
What is an 11 iron golf club?
The 8 through 11 irons (in Honma's nomenclature, the 10-iron is a pitching wedge and the 11-iron is a gap wedge) are designed for optimum spin to control the ball when it lands on the green by increasing contact time with the grooves while maintaining forgiveness, Suzuki says.
What is a 10 iron?
The pitching wedge is the lowest-lofted club typically called a wedge. It lies on the cusp between the numbered irons and the wedges (in fact it is sometimes labelled the "10-iron"), and is useful for a variety of short shots from firm or semi-soft lies.
How many clubs are in a set of irons?
A typical, off-the-shelf set of irons will include a 3-iron through pitching wedge (advertised as "3-PW"), 8 clubs total. The clubs are identified by a number (3, 4, 5, etc.) on the sole of each club, except for the pitching wedge which will have a "PW" or "P." Other irons may be available for purchase separately, including a 2-iron and additional wedges ( gap wedge, sand wedge, lob wedge). None of the additional clubs are necessary for beginners, and especially not the 2-iron. 1-irons used to be available, too, but are now virtually extinct.
Why are golf clubs called irons?
The golf clubs called irons are so-called because their clubheads are made of metal. Of course, "woods" are now also made of metal, but that's a relatively recent development. Irons have featured metal clubheads (steel, these days) for centuries. The clubheads of irons are thin from front to back, and the clubfaces are grooved to impart spin on ...
Why are irons called irons?
The golf clubs called irons are so-called because their clubheads are made of metal.
What is the difference between a blade and a muscleback iron?
The difference is that a blade-style features a full back on the rear ...
How many yards is a 3-iron?
The yardage gap between irons is generally 10-15 yards. Your 3-iron, in other words, should produce shots that are 10-15 yards longer than your 4-iron. The specifics of this gap depend on the player, but the gap should be consistent from club to club.
What are the different types of irons?
Irons are generally categorized as long irons, mid-irons , and short irons. Long irons are the 2-, 3- ,and 4-irons; mid-irons, the 5-, 6-, and 7-irons; short irons, the 8- and 9-irons and pitching wedge. (Two-irons are becoming obsolete and are exceedingly rare for recreational golfers. Because of this, some sources now count the 5-iron as one ...
What does it mean to hit the ball high on the green?
If you need to hit the ball high—to get over a tree, for example, or to make the ball land "soft" on the green (meaning hit the ground without much roll )—you would choose one of the higher-lofted clubs.
How to replace a 6 iron with a 13?
Replace Your 6 Iron with a Number 13 Fairway Wood: For some golfers who do not feel comfortable hitting an iron, the solution is to fill your bag with an extended range of fairway woods. Fairway woods can range anywhere from a 2 wood all the way up through a 25 wood. Woods decrease in length and increase in the loft as the number gets higher.
What is the difference between 13 wood and 6 iron?
In general, the 13 wood replaces the number 6 iron. Both clubs have a loft of between 30 and 35 degrees, but that is where the comparison. ends. The 13 fairway wood is hit with more of a sweeping motion while the iron is hit with more of a descending blow.
Is a 13 fairway longer than a 6 iron?
The shaft of a 13 fairway wood is about one inch longer than a 6 iron and provides greater leverage. While both clubs are designed to hit the ball the approximate same distance, the heel to toe forgiveness, you get with the wood results in higher average distance. Seniors, women and those that cannot hit a regular iron very far can benefit ...
Can you hit a number 13 iron?
Seniors, women and those that cannot hit a regular iron very far can benefit from hitting a number thirteen wood when they need both distance and loft. The addition of a flexible graphite shaft or a light-weight steel shaft can also increase the head speed for longer distance. A switch to all woods might just improve your game.
What is an iron in golf?
Iron. Irons are golf clubs that are designed to send the ball on distances between that of fairway woods and hybrids and that of wedges. This category of clubs is usually the most represented in a golfer’s bag – oftentimes at 7 clubs and classically numbering from 3-iron all the way to 9-iron.
What are the different types of iron clubheads?
Types of Iron Clubhead: Cavity Back vs Muscle Back (Blades) Irons either belong to one of two clubhead categories: the cavity back or the muscle back. Muscle back irons features smaller head sizes than their counterparts and are generally made using the forging process.
What are golf clubs made of?
In the very beginning of the game, golf club shafts were made from hardwood. In modern club design however, the shafts of irons are predominantly made from steel, although a sizable segment now feature shafts made from graphite and both are readily offered by club manufacturers.
What is loft on irons?
The loft (or angle of the clubface in relation to a vertical line) of irons climbs higher as does the number on the sole of the club. Or in other words, the loft will be lower on lower-numbered iron than on high-numbered irons.
Which shaft is better for golf?
Better golfers with faster swing speeds will tend to prefer steel shafts as they are thought to provide more feedback to the hands. In contrast, graphite shafts will usually be preferred by golfers with lower swing speeds and those with more limited body strength.
What are the numbers on golf clubs?
Numbers. The numbers stamped or marked on the heads of golf clubs relate to the club's loft. Fairway woods and irons are the clubs that are always stamped, although specialty clubs also carry some form of identification. A 4-iron, for example, has less loft than a 9-iron.
Why are golf clubs stamped with a number?
Clubs are labeled clearly for identification. Most golf clubs are stamped with a number as a means of identification. Although experienced golfers are often able to differentiate between their clubs simply by viewing their size, shape and loft of their clubface, the number helps make this distinction certain.
Why do golfers use clubhead covers?
Most golfers use clubhead covers to protect their driver and fairway woods from damage sustained in their golf bag. These covers are always marked with corresponding numbers so that even when a clubhead is covered, you can still identify the club with ease.
What does 9.5 mean on a golf club?
A driver, however, usually has a number such as 9.5 or 10.5 to indicate the loft of the club. Drivers are available in a variety of lofts. Wedges typically don't have numbers. Instead that have letters such as P or PW ...
Where is the number on a fairway wood?
In most cases, the number displayed on a fairway wood or iron is always in the same place. On fairway woods, this number is often on the bottom of the club so that it's visible when the club is in your bag. Numbers stamped on irons are usually found on the bottom of the club for the same reason, but some manufacturers display this information on ...
Do sand wedges have numbers?
Wedges typically don' t have numbers. Instead that have letters such as P or PW for pitching wedge and S for sand wedge. The sand wedge, gap wedge and lob wedge might also be identified by the degrees of loft. The sand wedge, for example, might say "56" for 56 degrees of loft, rather and "S." Putters also are not marked with a number because ...
Iron golf club distance chart
As we know that Iron golf clubs are categorized through different numbers. In most cases, they are available with a number from 2 to 9. Here is a little chart that will show you the expected distance you should get with a particular Iron-
What are the factors that determine the speed and distance?
Only picking up the right club is not going to deliver the appropriate distance you deserve. If you lack the skill, you cannot expect to get an explosive distance. But choosing the right club is as important as being better with your swing.
What is the range of mid irons?
The next category of irons is the irons in the range of 5 to 7. Mid irons are common clubs that golfers use on par 3’s and approach shots with 160 yards. That number can fluctuate greatly depending on how much power a golfer has.
What is a long iron?
Long irons are considered any iron between 1 and 4. The important thing that beginners mix up is about the distance that each iron goes. The smaller the number, the less loft so it goes farther. For example, your 3-iron should go much further than a 7-iron!
Why are woods used in golf?
The first reason is that they are great off of the tee if a golfer is struggling to keep their driver straight. The second reason that woods ae used is that they hit the ball a bit shorter than a driver, so there are situations for it. The third reason is that they can be used in the fairway if you are a long way out.
How far can you hit a 3-wood?
The major downside to using a wood is that it is very tough to hit a flush shot out of the rough or a tricky lie. According to Dummies, a normal man hits a 3-wood about 210 yards and a woman hits a 3-wood about 180 yards. Further reading – The Best Fairway Woods For High Handicappers.
Why do you tee the ball up for a driver?
The reason that you tee the ball up for a driver is that the sweet spot is higher up off the ground and no touching the ground. The driver ball flight is usually medium to high in trajectory and rolls out very nicely.
What is the last club on the golf list?
The last club on the list is a putter, and I am sure if you are on a golf site then you have heard of one. The putter is used on the green and is the last club that you will use on every hole in most cases.
What is a hybrid golf club?
A hybrid is a type of golf club that has become popular relatively recently and it is a mix between a wood and a long iron. The point of them is to be more forgiving and able to use in rougher lies compared to woods.
Super Game Improvement Irons
The super game improvement iron category has been around for less than a decade. There have always been versions of super game improvement irons, but today just about every manufacturer offers its own version.
Game Improvement Irons
Game improvement irons are a toned-down version of super game improvements irons and they fit a much wider range of golfers. Some players can actually stay in game improvement irons for their entire golf life.
Players Distance Irons
The players distance iron genre came out of necessity and consumer demand. Golfers playing game improvement irons who found they weren't getting enough spin on their approach shots but weren't ready sacrifice distance by switching to players irons needed another option. And with that, players distance irons were born.
Muscle Back Irons
Muscle back irons are a more forgiving alternative to the traditional blade. The point of a muscle back iron is to provide feel and workability to better players while incorporating some of the offset and forgiveness found in other types of irons. The word “muscle” refers to the noticeable material you’ll see near the sole on the back of the club.
Players Irons
Players irons are another broad category, but to to put it simply, they are intended for better golfers. Players irons can take on the design profile of cavity backs or muscle backs, but they typically don’t lean towards the blade profile.
Blade Irons
Blades irons feature the thinnest top and bottom line of any golf iron you can find. They are the least forgiving, lowest launching, and overall hardest to hit. Sold yet? No worries, blades aren’t for everyone, but for advanced players, blades can be a tremendous asset to your golf game.
Iron Selecting Guide
Now that you know all about every type of iron on the market, it's time to decide which style is best for your game. Use this table to help guide you to the perfect set of irons.
Set Composition
Loft, Length, and Distance
- As you go through the set, from the 3-iron to the pitching wedge, each iron has a little more loft than the previous, and a little shorter shaft length than the previous, so each club (going from 3-iron to PW) hits the golf ball a little less distance than the previous. That is, a 5-iron has more loft, a shorter shaft, and produces shorter shots than the 4-iron; the 4-iron has more loft, a shorter sh…
Long, Mid-, and Short Irons
- Irons are generally categorized as long irons, mid-irons , and short irons. Long irons are the 2-, 3- ,and 4-irons; mid-irons, the 5-, 6-, and 7-irons; short irons, the 8- and 9-irons and pitching wedge. (Two-irons are becoming obsolete and are exceedingly rare for recreational golfers. Because of this, some sources now count the 5-iron as one of the long irons. We still classify it as a mid-iron…
Distances
- Learning your distances—how far you hit each club—is much more important than trying to hit each club to some predetermined "correct" yardage. There is no "right" distance for each club, there is only your distance. That said, a typical male recreational golfer might hit a 4-, 5-, or 6- iron from 150 yards, while a typical female might use a 3-wood, 5-wood, or 3-iron from that distance. …
Hitting
- Irons can be played from the teeing ground, using a golf tee, and it is often appropriate to do so. On a par-3 hole, for example, you will probably use an iron on your tee shot. Or you might use an iron off any (or even every) tee in order to have better control over the shot. But most of your iron shots will come from the fairway. Irons are designed with divots in mind. That's why they have a …