TaylorMade Golf
TaylorMade Golf Company is an American manufacturer of golf clubs, bags and accessories based in Carlsbad, California, United States. TaylorMade Golf was sold by Adidas to KPS Capital Partners in October 2017.
What is an wedge?
Apr 20, 2021 · With raw wedges, how the grooves are machined is exactly how they finish. Designed with precise intent and unencumbered by an outside element that could change the resulting geometry. These discoveries led to the creation of RAW Face Technology , which is now available in TaylorMade’s Milled Grind 2 and Hi-Toe RAW wedges.
What is the downside of using raw wedges?
Aug 01, 2017 · The strength and drawback to the raw wedges is they rust. The rust gets on everything, balls, gloves, bag, towels, hands, clothes, everything. Then you have to clean the rust off, I used naval jelly, just to try to keep things clean. Eventually I gave up. Raw vokey wedges are a nice idea in theory but in practice they're a real pain.
What is a TaylorMade raw face wedge?
May 24, 2019 · When to Use a Wedge for a Golf Shot . As for the appropriate time to use other wedges, that will, of course, be determined primarily by the yardage of your shot. On full shots from the fairway, a typical recreational male golfer might hit a sand wedge about 65-75 yards yards; women, 45-60. A lob wedge would be 40-50 yards for men, 25-40 for women.
When to use a wedge for a golf shot?
What is a RAW wedge? A RAW style, or wedge that can rust, is a wedge that has an unfinished coating and is without the protective chrome that covers other wedges. This idea for leaving the wedge “unfinished” was founded by wedge designer Roger Cleveland when he created a line of wedges for tour players. His thoughts were to make a wedge that had a non-glare surface to …
Why do golfers use raw wedges?
TaylorMade says, and it has been a commonly held theory for a while, that raw wedges that go rusty will spin more and feel softer over time. They should also reduce sun glare and preserve the geometry of the grooves for longer-lasting spin.Sep 30, 2019
What are raw wedges?
'Raw' wedges (where there's no plating or finish coating so rust can for on the head's surface) are nothing new. Bernhard Langer was a massive fan of going raw, not only on his wedges but his irons too – as he felt they gripped the golf ball better.Oct 1, 2020
How do you treat raw wedges?
0:123:47The GolfWRX Shop: Refurbishing Rusty Wedges - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here's what you use double strength cleaning vinegar. This stuff is ten percent acetic acid. AndMoreSo here's what you use double strength cleaning vinegar. This stuff is ten percent acetic acid. And what that's going to do is it's going to help eat away at the rust.
Do raw face wedges spin more?
The rust does not add spin, but a raw wedge will spin more, so... It's not the rust; it's the lack of plating. What would actually add more spin: hitting the ball in the fairway and having a good lie. You can customize them by grinding edges or bounce off in the tour van without it looking awkward.
Are raw wedges good?
Raw wedges also tend to create a softer impact. Jordan Spieth, three-time Major winner and Club Champion ambassador, says he's been playing Vokeys for years now — always with the raw finish. “I love the look and the feel of the raw metal, especially when it starts rusting,” he adds.
Do raw wedges work?
Ger21: “Raw steel is softer than chrome plating, so raw wedges will scratch and scuff more than chrome, and potentially wear faster. But if you keep them clean, you should easily get 10 years or more out of them at 12 rounds/year. If you don't want them to rust, clean and oil them after each round.”Mar 13, 2020
How long do raw wedges last?
Studies have shown that a typical wedge will last 65-75 rounds before there's a dip in performance. For the average recreational golfer who plays regularly, that comes out to about every 18 to 24 months.Jun 12, 2020
How long does it take a raw wedge to rust?
TGW: So how long does it take rust to develop on a wedge like this? CC: Surface rust can happen overnight, after just one round. If the ground is a little wet or has just any kind of moisture, you can notice surface rust right away.
What is the fastest way to rust raw wedges?
But, if you really want to accelerate the rusting process for your personal preference, you can spray your wedge with salt water and let it dry on its own.Apr 20, 2021
What does TaylorMade raw mean?
Raw Face Design ZTP Raw Grooves offer sharper, deeper and narrower grooves and a sharper radius, which further combined with a rougher surface from the laser etching between the grooves, enable the golfer to create more friction between the clubface and the ball generating more greenside spin.Aug 12, 2019
Why do TaylorMade wedges rust?
Rusting generally happens within the natural cadence of playing golf. You hit a shot, clean your wedge and happen to store it while it's still wet – that will create rust over time. Or you play in wet conditions and don't completely dry your wedge after the round.Apr 20, 2021
Why do Cleveland wedges rust?
Leaving the metal raw means the clubhead will be a dull gray color – at first. Without the protective chrome, moisture will quickly cause the wedge to rust. This typically starts as a few dots of rust, and can quickly spread across the entire clubhead.Nov 14, 2005
Why does my golf wedge rust?
Rusting generally happens within the natural cadence of playing golf. You hit a shot, clean your wedge and happen to store it while it’s still wet – that will create rust over time. Or you play in wet conditions and don’t completely dry your wedge after the round. Again, over the course of time, this will cause rusting.
Why is raw steel better than chrome?
The main reason for this performance improvement is the inherent roughness of raw steel compared to chrome, which helps preserve friction between the clubface and the ball. Engineers also discovered the maintained integrity of groove geometry.
Does rust affect performance?
In addition to providing a look that better players prefer, rust can impact performance slightly. RAW Face Technology does the bulk of the heavy lifting, as each wedge is designed to deliver optimal performance right out of the box, but rust is like the cherry on top.
Can you spray a wedge with salt water?
In drier climates, wedges can be slower to rust. But, if you really want to accelerate the rusting process for your personal preference, you can spray your wedge with salt water and let it dry on its own. Repeating this process will add more rust. Ultimately, however, more rust doesn’t necessarily mean more spin.
When will rusty wedges come back?
The Truth About Rusty Wedges. Raw wedges that go rusty over time are making a bit of a comeback in the latter part of 2019, thrust back into the limelight with the launch of the TaylorMade Milled Grind 2 wedge.
Do raw wedges feel softer?
TaylorMade says, and it has been a commonly held theory for a while, that raw wedges that go rusty will spin more and feel softer over time. They should also reduce sun glare and preserve the geometry of the grooves for longer-lasting spin.
What is a wedge in golf?
Wedges are the highest-lofted clubs in a set of golf clubs, designed for short approach shots (for most golfers, 120 yards and in), strokes played out of sand, chip shots and pitch shots, and generally any shot for which the golfer wants the ball to ascend and descend sharply.
Why do golfers use wedges?
Because wedge shots have such a high trajectory, they tend to roll very little once they hit the green. More accomplished players can produce a great deal of backspin with a wedge, causing the ball to back up (or "bite") once it hits the green. Any wedge can also be used for chipping around the green.
What is a gap wedge?
With pitching wedges typically lofted from 42 to 46 degrees, the gap wedge is so-called because it closes the "gap" in loft between the pitching wedge and sand wedge. A typical gap wedge might might be lofted from 48 to 54 degrees. The gap wedge also goes by the names A-wedge, attack wedge and approach wedge.
What is the loft of a lob wedge?
A typical lob wedge might have a loft of 60 degrees to 64 degrees. As its name implies, a lob wedge allows a player to "lob" the ball high into the air, from where it will drop steeply down onto the green, with little or no roll. With pitching wedges typically lofted from 42 to 46 degrees, the gap wedge is so-called because it closes ...
What is a 60 degree wedge?
Wedges feature the shortest shafts and highest lofts of any golf clubs. In fact, wedges are often identified by their loft rather than their name. A lob wedge might instead be called a "60-degree wedge," for example. Sand wedges were invented (generally credited to Gene Sarazen) to make shots out of sand bunkers easier.
What is the difference between a pitching wedge and a sand wedge?
Pitching wedge: The lowest-lofted of the wedges (the one that hits the ball the farthest), pitching wedges (abbreviated PW) are usually included in a set of irons. The PW is considered one of the basic clubs every golfer carries. Sand wedge: Designed specifically to make hitting shots out of bunkers easier. Abbreviated SW.
Why are gap wedges called wedges?
Today, the other two wedges that are common are: Gap wedge: So-named because it falls in-between the pitching wedge and sand wedge in loft. The gap wedge has more loft than a PW, less loft than a SW.
What is a raw wedge?
A RAW style, or wedge that can rust, is a wedge that has an unfinished coating and is without the protective chrome that covers other wedges. This idea for leaving the wedge “unfinished” was founded by wedge designer Roger Cleveland when he created a line of wedges for tour players.
Why are raw wedges not chrome?
Because RAW wedges do not have a protective chrome layer, they will be less durable and will soon create less spin than a finished wedge, as the rust will interfere with the milling. Most of these wedge companies today do ...
What does rust look like on a golf wedge?
Your RAW wedge will at first start with little rust dots on the face. This rust will then spread and fully coat the face and head giving the wedge a very dark, gold appearance. Be careful. Rust can spread onto other clubs, towels and golf bags so be sure to give your wedges distance from other objects.
Why do we need to create spin with wedge shots?
We need to create spin with wedge shots in order for the golf ball to launch correctly and land softly onto the green. Wedges made today are designed with laser milled grooves that cover the face of a wedge. The point of this is to offer golfers the maximum amount of spin possible to get the golf ball to stop quickly onto the green.
Why do people use rusted wedges?
Golfers like Jordan Spieth have claimed that rusted wedges allow him to better dial in the grind of the wedge. Another reason people use rusted wedges is that they are believed to have a softer feel because they lack the extra chrome coating.
How to get a wedge back to raw steel?
You can use a bottle of coke and pour that into a bowl to soak your wedge. (Kind of disturbing that we drink this stuff) You cover your wedge in ketchup and the salt/vinegar will eat away at the rest to get your wedge back to the RAW steel look.
Which finish has more spin?
However, this mostly due to the fact that the chrome finish did have more spin and a higher ball flight than the RAW finish. This makes sense because a golf ball that generates more spin will travel higher and land softer.
What are the features of a wedge?
The most important features in a wedge, according to Brian Bazzell VP for product creation, is precision, feel and spin. Milled Grind was already spot on with precision, but player feedback was asking for better feel and if more spin could be generated, great.
What is the best sand wedge for a square face swing?
There are six grind options on offer: The F grind is a full sole grind best for square-faced and full swings. The F 54 and 56 are the most popular sand wedges on the PGA Tour. The S grind was probably named for Steve Stricker and is more versatile on the square-faced shots.
What is the angle between the leading edge of the club and the ground?
Bounce and Grind. The bounce is the angle between the leading edge of the club and the ground. This allows the club to “bounce” off the surface instead of digging in and slowing down the stroke. The lower angle would be preferred if you are playing on harder surfaces.
How many clubs can you carry in a golf club?
You are restricted to a total of 14 clubs. Most golfers get away quite easily with two or three wedges. If you find it necessary to carry four wedges it will generally mean sacrificing a wood, hybrid or other clubs. Consider your needs and priorities in order to determine the ideal club selection.
What is the loft angle of a sand wedge?
The sand wedge is equally common with a steeper loft angle of 54-58 degrees and as the name suggests is used to get out of greenside bunkers or maybe deep rough. This club would not usually be used for distance and would typically give you up to 70 or 80 yards.
What is the new groove on the raw face?
The new grooves on the raw face are deeper, narrower and have sharper edge radius. Add to this the new laser etching between the grooves and the call for more spin is answered. The laser etching additionally gives the surface a roughness that grips the ball and prevents it from skidding up the face of the club.
Do wedges look good?
You want your clubs to look good in your bag. This is very much a personal preference but some wedges are undeniably better looking than others. Look for one that works with your preference and style and compliments your other clubs. While performance is of the utmost importance looks are still relevant.
