True Temper reintroduced the Rifle Iron Shaft in 2017. it is a parallel shaft which a True Temper Performance Fitting Certified Club Maker can trim to exacting stiffness. The Rifle shaft has a long history in the golf business and was once a popular shaft on the PGA tour.
Full Answer
What is a rifle barrel made of?
By Chuck Hawks A rifle barrel is usually a long (16 to 30 inches), tapering, tube made of steel with thick walls. It starts as a steel bar, which is then drilled and reamed to the "bore diameter" of the cartridge for which it is to be chambered.
What is the average length of a golf shaft?
The shaft is roughly .5 inch/12 millimeters in diameter near the grip and between 35-48 inches/89–115 cm in length. Shafts weigh between 45 and 150 grams depending on the material and length. Graphite shafts are woven from carbon fiber and are generally lighter in weight than steel shafts.
Are steel shafts better for golf irons?
Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control. Steel shafts place a greater focus on accuracy as opposed to distance.
What type of shafts are used in golf clubs?
Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel. Graphite shafts weight between 50-85 grams.
What is a rifle golf shaft?
Rifle Steel Shafts Frequency Matching of each shaft perfectly matches the flex throughout a set of clubs using electronic calibration. Flexes in Rifle shafts can also be more exactly tailored for the average golfer as they use decimals to meaure stiffness (eg 5.0, 5.5, 6.0, etc).
What are the different types of golf shafts?
There are generally five types of shaft flex: ladies, senior, regular, stiff and extra stiff. If you have a flex that doesn't match your swing speed then you're probably losing distance and/or accuracy. An incorrect shaft flex becomes more noticeable the longer the club gets (ie. with the driver).
Who makes Rifle shafts?
Rifle Project X Flighted shafts are designed and manufactured by True Temper Sports, the leading manufacturer of golf shafts in the world and is consistently the number one shaft on all professional tours globally.
What does 5.5 shaft flex mean?
StiffStiff – 5.5. Stiff Plus – 6.0. Extra Stiff Flex – 6.5. Extra Stiff Plus – 7.0.
What shaft flex should a beginner use?
But if a beginner player already has a decent swing motion and generates clubhead speed between the range of 95 to 110 mph or more, then a stiff shaft or extra stiff shaft could be justified to be used by a beginner golfer.
How do I choose the right golf shaft?
Put simply, the higher the rating, the more the shaft is prone to twisting. It is the torque that also determines how the shaft feels to every player, which means that the higher the rating, the softer the shaft will feel. A shaft with a 3-degree torque will feel much stiffer than a 5-degree torque, for example.
What is a stepless shaft?
“Stepless is a one-piece shaft,” he said. “The taper rate and wall thickness determine flex characteristics. So you look at a guy like McIlroy; he loves Project X because he doesn't want to feel anything dynamically in the shaft. He wants it to be a one-piece feeling without the load and release.
What is Project XT shaft?
The Project X iron shaft is a cult classic stepless iron shaft as well as one of the most popular iron shafts on Tour. Geared towards players with a more aggressive iron swing, the Project X aims to keep both your launch and spin numbers down.
Where are True Temper golf shafts made?
Amory, MississippiTrue Temper's corporate headquarters is located in Memphis, Tennessee, USA. Every steel shaft bearing the True Temper name is produced in their steel manufacturing facility in Amory, Mississippi, USA. This 325,000 square foot facility was opened in 1965.
Is 6.0 a stiff shaft?
Have you ever wondered what the number designation on your Project X shaft means? You know, the 5.0, 6.0, 6.5 and so on printed on the shaft. These numbers correspond with flexes from “regular” to “extra stiff plus”.
What flex do I need for my irons?
Should You Use Regular or Stiff Flex Shafts?6-iron Carry Distance6-iron Swing SpeedShaft flex (all clubs)< 130 yards60 – 70 mphSenior Flex131 – 155 yards71 – 80 mphRegular Flex156 – 175 yards81 – 90 mphStiff Flex> 176 yards91 + mphX-Stiff FlexApr 13, 2021
What happens if shaft is too flexible?
Having a shaft that is too flexible can also cause the ball to hook uncontrollably, because the shaft bends incorrectly, it will come through with a closed clubface causing the ball to go left, this is because the shaft can't handle your swing speed, and the head is rotating too much.
What are the best golf shafts for drivers?
The 10 BEST DRIVER SHAFTS 2022Project X HZRDUS Smoke Shaft (Best Overall)Mitsubishi Diamana Driver Shaft (Best for Quality)Mitsubishi Tensei CK Pro Series (Most Versatile Shaft)Fujikura Vista Pro 60 Driver Shaft (Best Club Head Speed)Aldila NVS 55 Shaft (Best for Boosting Distance)More items...•
What golf club shaft flex should I use?
If you're between 97 and 104 mph with the driver, you need a stiff flex. Regular – Now we are getting into the range where a majority of recreational golfers fall, and also where many LPGA pros fall. If you're between 84 and 96 mph, regular is going to be best for you.
What are the different flex types for golf clubs?
There are five flex ratings for golf clubs--extra stiff (X), stiff (S), regular (R), senior (A) and ladies (L). Generally, the faster your club speed, the stiffer the shaft, but use care when selecting a flex. If you are not certain or in between flexes, it is better to select a softer flex than a stiffer one.
What swing speed requires a stiff shaft?
What swing speed requires a stiff shaft? Golfers at driving speeds over 90 mph should generally use a stiff shaft. Under 90 mph should probably use a regular shaft.
What is a rifle tour shaft?
Rifle Tour Flighted shafts are very different than almost any shaft on the market. They are designed so that the kickpoint of the shaft is lowered as the shaft length increases to help hit long irons higher and short irons lower. In actuality they seem to hit pretty high in general, especially compared to DG's.
Why do tour players prefer rifle shafts?
The reason why many tour players prefer Rifle shafts is because with the frequency measurement method there is much greater consistency through the whole set of irons than with the simple weighting. Maybe because of this True Temper recently released their frequency tuned DGBlack...
What are rifle barrels made of?
Materials and barrel life. Rifle barrels are usually made from steel alloys called ordnance steel, nickel steel, chrome-molybdenum steel, or stainless steel , depending upon the requirements of the cartridge for which they are chambered.
How long is a rifle barrel?
A rifle barrel is usually a long (16 to 30 inches), tapering, tube made of steel with thick walls. It starts as a steel bar, which is then drilled and reamed to the "bore diameter" of the cartridge for which it is to be chambered.
How much FPS does a barrel have?
As a rule, figure 50 fps per inch of barrel, plus or minus, if your barrel is longer or shorter than 22 inches." However, they do not say what category of load to which this 50 fps average pertains.
What is a 1:12 twist barrel?
A 1:12 twist is ideal for best accuracy with varmint weight bullets (70-85 grains) in a high velocity .24 (6mm) caliber rifle. The heaviest spitzer bullet that a .244 with a 1:12 twist barrel could stabilize was 90 grains.
What does it mean when a barrel is falling velocity?
Falling velocity, compared to a new barrel, is a sign that a barrel is wearing out. To give a satisfactory service life, barrels for high velocity cartridges must me made from tougher and harder steel than barrels for lower velocity and pressure cartridges.
Why are heavy barrels better than lighter barrels?
Their weight (within reason) makes it easier to hold the rifle steady. For all of these reasons, heavy barrels are generally more accurate than lighter barrels. The medium weight sporter barrel (#2 in some brands) is an attempt to find a reasonable compromise between portability and performance.
Why do rifle barrels wear out?
Barrel wear is due to erosion from the extreme heat and pressure caused by firing a cartridge . Erosion starts in the barrel's throat, where the rifling begins, as this is where the heat from the burning powder is greatest; it literally melts away the steel a tiny bit with every shot. Erosion gradually moves down the bore with use and can be seen with the naked eye as it becomes more severe. Heat is bad for barrels, so letting a barrel cool between shots extends barrel life.
How much weight should a golf shaft be?
Weight. Getting the correct weight of your shaft is an important factor to consider as well. Shafts can range anywhere from 40 to 135 grams. Typically the rule of thumb is that a golfer with a slower swing speed will benefit from using a lighter shaft, and you would add weight as swing speed increases. As you might expect at this point, there are ...
Why is it important to choose the right shaft for golf clubs?
It can give you the best chance at striking the center of the face that will result in optimal launch conditions on the course. It absolutely has an effect on how well you can play.
What does it mean to choose the wrong shaft for a golf club?
Choosing the wrong shaft will make it much harder to access the center of the face more consistently on the course , and the last thing we want you to do is to make golf harder on yourself!
Why didn't Nick Price find a stiff shaft?
Regardless of the similarity in their swing speeds, Nick Price couldn’t find a shaft stiff enough for his swing because he would apply such an enormous amount of force, whereas Couples didn’t need as stiff of a shaft because of his smooth tempo.
What is fitting in golf?
When we put a customer through a fitting, we determine the right profile, weight, and flex that is required. Essentially we are writing a prescription for the golfer’s swing, and order the shaft to match what we believe will help them the most.
Why is shaft profile important?
Getting the right shaft profile for your swing is very important. It will greatly affect your ability to hit quality shots on the course . There is a lot of confusion in the golf shaft industry. With no standards for performance, the quality greatly varies, and often you get what you pay for. We hope that we have cleared up some ...
What is the most misunderstood product category in the golf industry?
One of the most misunderstood product categories in the golf industry is shafts . There are plenty of myths and mistruths out there that we wanted to clear up for you in this article and share what we have learned at Pete’s Golf over the past several decades.
What is the difference between DG and rifle shafts?
Differences between DG and Rifle shafts. Along with the Dynamic Gold’s, this is the most popular high-end steel shaft for low-handicappers, but prices are higher for the Rifle – roughly 70% more than Dynamic Gold’s. This is a stepless shaft that derives its name from its internal rifling. This gives the outside a clean, smooth look.
What shafts are good for a male golfer?
It can generally be assumed that those with faster swing speeds will prefer the Dynamic to other comparative True Temper shafts such as the TT Lite and the Dynalite. But, the Dynamic’s have a wide appeal. With their high bend point, the Dynamic’s produce the lower, penetrating ball flight that most male golfers prefer. For low- to mid-handicap, male golfers aged 15 to 50, the Dynamic’s have traditionally been the number one choice. With relatively hefty weights, they are rugged, solid-feeling shafts.
What is a XL lite shaft?
The XL Lite is probably the most friendly and likeable steel shaft in golf. It is also capable of very fine performance. The average golfer hits too high one week; too low the next. He is not sure just what kind of shaft that he needs. For him, the XL Lite is the advisable route to go. With its mid bend point and moderate flex, it suits most of the broad, middle spectrum of golfers. For general use among upper mid- to high-handicappers, this is a wise choice – more appropriate than the lower-hitting Dynamic’s. With the Sensicore option added, it’s a very sweet, plush-feeling shaft. The XL Lite is also a good option for senior men and women who are a little too strong for True Temper Release shafts. Additionally, with its sharp, green, black and silver shaft bands, this shaft makes a much dressier looking set of irons than do the Dynamic’s. Many clubmakers keep a supply of XL Lite’s on hand due to their wide appeal.
Is there a steel shaft in golf?
Yes there other steel shafts out there, ie Nippon, TX-90, Black Gold etc but this list I believe represents what 85% of golfers have in there bag. Including all the Rifle options of course.