
What Is a Uniflex Shaft?
- The Middle-of-the-Road Shaft. A golf shaft’s flexibility rating tells you how much the shaft will bend during your downswing. ...
- Uniflex Shaft Composition. The uniflex designation doesn’t refer to a shaft’s composition, nor to the type of club in which it’s used.
- Who Should Use a Uniflex Shaft. ...
- Shaft Flex Variability. ...
What are the best golf shafts?
best golf shafts for irons
- UST Recoil ZT9 Iron Shaft Set. UST Mamiya Recoil ZT9 Iron Shafts are known for the best and unparalleled stability in the industry.
- Aerotech Steel Fiber FC 90. The new SteelFiber FC shafts are designed with a progressive tip that gives higher ball flight in the mid- and long irons also classic ...
- Mitsubishi-Rayon Kuro Kage Black 70 Iron R Shaft. ...
How much flex should your golf shaft have?
Determining which golf shaft flex your need (stiff, regular, senior, etc.) requires club fitting and testing. Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
What type of golf shafts are right for You?
- Steel shafts are less expensive than their counterparts’ graphite and multi-material shafts.
- As these shafts are made with heavy steel, you will get great control over the golf club you are using.
- Though these shafts will ensure control, you may suffer when it is about taking the ball some extra yardages. ...
What is a senior flex golf shaft?
Who Should Use Senior Flex Shafts?
- Swing Speed Between 75-85 MPH. Senior golfers with a swing speed between 75-85 mph will benefit greatly from the senior flex golf shaft.
- Drive Distance Around 180. If you are playing a regular golf shaft and hitting the ball around 180 yards, it is likely time to switch to the senior shaft.
- Low Launching. ...
- Older In Age and New To The Game. ...

What is uniflex shaft used for?
Uniflex shafts are aimed at golfers with a swing speed in the upper end of the regular band (85+ mph). You can still use a regular shaft at this speed and achieve success. Using a uniflex shaft will ensure that you can squeeze a little more from your game if your swing speed is a little bit faster than average.
Is uniflex and regular flex the same?
U – Uniflex shafts are for golfers who swing the club above 90 mph. Ideal for most male golfers and those tending to lose their strength. R – Regular flex for swing speeds from 75 mph to 90 mph.
What shaft flex should a high handicapper use?
Regular. The most common flex, regular, is designated as "R" on the flex chart and is recommended for golfers who regularly drive the ball 210 to 240 yards and have a swing speed between 75 and 84 mph. Steel and graphite shafts are available in regular flex, which is appropriate for men with mid to high handicaps.
What flex shaft should my irons be?
In general, golfers with driver swing speeds over 95 mph should play stiff flex shafts, and those under 95 mph should play regular flex. Shafts also come in extra stiff (105+ mph) and senior flex (under 85 mph).
What stiffness is a uniflex shaft?
The uniflex shaft will vary slightly between manufacturers, but it is usually a mix of a stiff and regular shaft (a bit closer to the regular than the stiff). They are a middle of the road shaft that will suit people with a medium swing speed the best.
What shaft is best for my swing speed?
– Golf Shaft Flex ChartCarry DistanceSwing SpeedFlexUnder 200 yardsUnder 75 mphLadies or Senior200 to 240 yards75 to 95 mphRegular240 to 275 yards95 to 110 mphStiffOver 275 yardsOver 110 mphStiff or Extra StiffOct 15, 2019
What shaft should a senior golfer use?
When it comes to senior flex drivers, the Mitsubishi Rayon are some of the lightest and most forgiving. This is a 57gram shaft, which is a perfect weight for a senior golfer. Anything under 60 grams is going to help golfers get more clubhead and ball speed.
How do I know what shaft flex is right for me?
Some General Guidelines About Shaft FlexTake a look at the distance you hit your driver. ... If you have a very smooth swing, you might benefit from a softer flex even if you swing fast. ... If your drives go left, you might benefit from a stiffer flex; if your drives go right, you might benefit from a softer flex.
How do you tell what flex shaft you need?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
What is a good swing speed for a 7 iron?
An average golfer will swing a seven iron about 75 mph. This number can change based on the weight of the club and if it is steel or graphite. The faster you swing a seven iron, the further it will go. If you can swing at about 85 mph, you will see distances closer to 165 yards.
What happens if shaft is too flexible?
Having a shaft that is too flexible can also cause the ball to hook uncontrollably, because the shaft bends incorrectly, it will come through with a closed clubface causing the ball to go left, this is because the shaft can't handle your swing speed, and the head is rotating too much.
What shaft does Tiger Woods use?
Mitsubishi Diamana D+ 60 TXTiger has a Mitsubishi Diamana D+ 60 TX shaft fitted to his driver.
What is the most popular shaft for a game improvement?
Irrespective of build, size, height, sex, flexibility, and age, a game-improvement shaft is available. Currently, steel, lightweight steel, and graphite shafts are the most popular. It must be emphasized that the below information is a guide and manufacturers all have slightly different specifications which can change depending on the composition.
What is XXS golf?
XXS – Extra, extra stiff for golfers who swing the club above 115 mph.#N#Many professional golfers use this flex in the driver and irons but they are extremely difficult to control.
Why are graphite shafts so popular?
Graphite shafts have become very popular due to the lightweight that allows for increased clubhead speed. It offers an easy launch with less effort. Graphite is good for the slow swing speed and suits senior golfers and women. A downside of graphite can be high torque (twist) and too much flex on faster swings.
How much does a steel shaft weigh?
A normal steel shaft weighs 115 gm to 125 gm. The powerful golfer with a high swing speed can control the heavy shafted irons and use the stiffness to generate great distance. Light-weight steel shafts can weigh anywhere between 95 gm and 110 gm.
What is a young and strong golfer?
The young and strong golfer who lets it “rip” without compromise. Physically strong players who seek control within the game. Ideal for most male golfers and those tending to lose their strength. The slow swinger relies on the “kick” of the shaft to get the ball out there.
What is the golf industry?
The golf industry is an ever-evolving dynamic challenge for manufacturers and technology embraces a continuous improvement philosophy. Amateurs and social golfers are lead by the exploits of the professionals, who hit the ball further, straighter, and with controlled spin. We all want to do the same.
Is a golf shaft good for beginners?
The shaft is also good for the beginner due to the inconsistency of the swing speed. Weights of shafts differ from one manufacturer to another. The flex of the shaft is also manufacturer-specific and should be checked before the purchase.
What is a Uniflex shaft?
The uniflex designation doesn’t refer to a shaft’s composition, nor to the type of club in which it’s used. You’ll find uniflex steel and graphite shafts. Uniflex shafts are also used in drivers, hybrids, irons and wedges.
What is the best shaft for a golf swing?
Former U.S. Golf Assocation technical director Frank Thomas recommends an “R” flex for players with swing speeds of 80 to 95 mph, so a uniflex shaft is best for players with swing speeds of approximately 90 to 100 mph -- in other words, ...
What does the L mean on a golf shaft?
Golf manufacturers typically classify their shafts with a letter scale in which “L” indicates the most flexible shafts -- the ones that bend the most when you swing.
What should I consider when purchasing a golf shaft?
In addition to obvious factors such as the shaft’s composition, weight and length, you should consider its flexibility, as well.
Is Uniflex shaft flexible?
There is no industry standard with respect to shaft flexibility. As a result , a uniflex shaft offered by one company may be more or less flexible than a uniflex shaft made by a different manufacturer. If you’re interested in a uniflex club, your best bet is to try one out.
What does "uniflex" mean in golf?
What Does Uniflex Mean In Golf Clubs. If you are shopping for a set of irons you may have noticed the term uniflex. This term refers to the flex on the shaft of irons. If you are looking to buy a set that features a uniflex shaft we believe you should have a full understanding of the term before purchase.
How fast can you swing with a Uniflex shaft?
The best way to determine if you are a good match for uniflex clubs is if you have a swing speed from 75-95mph. This 20mph range is quite large and you’ll find will include most golfers.
Can you use Uniflex shafts on all golf clubs?
Though it is not true that this shaft works for all golfers. It can still be used by a wide range of swing speeds. Uniflex shafts are actually the most common steel s hafts sold on the market today.
Is it safe to buy golf clubs as a gift?
This is because the majority of golfers fit into this swing speed range. If you buying clubs as a gift this is a fairly safe bet. The golfers that don’t fit into this category tend to be seniors, women, or highly skilled golfers.
Do senior golfers use stiffer shafts?
Hence Senior golfers with slow swing speeds use a senior flex. While golfers with high swing speeds will often use stiffer shafts. This shaft sits in between these two models.
Which is more flexible, a regular or a uniflex shaft?
Regular is the most flexible and should be used by average swing speeds, Uniflex are slightly more sturdy and stiff is as the name suggest, less flexible and reserved for faster swing speeds. A uniflex shaft offers you an option when you are not sure whether you should be playing a regular flex or a stiff flex shaft.
What is a stiff shaft?
Uniflex Vs Stiff Shafts. Stiff shafts are generally used by golfers that have played golf for an extended period and honed their swings to be able to control the driver at such high speeds. As you grow in confidence and control of your swing speed you may find that you are not getting the maximum benefit from a regular shaft ...
How fast should a golf swing be?
The same applies to golfers with a swing speed of 95 mph and the use of a stiff flex shaft. If you hit your drives between 240 yards and 275 yards the uniflex shaft will be best suited to your swing.
What is the average swing speed for a golf club?
Regular flex is aimed at the average golfer with a swing speed between 75 mph and 85 mph and as high as 90 mph. This is the most used flex and most new clubs come standard with regular flex shafts. It can be identified by an “R” nomination on the shaft and is available in steel and graphite shafts. Most golfers who consistently drive ...
How heavy is a driver shaft?
Driver shaft weight can vary from 65g to 130g.
Why use graphite shafts?
Graphite shafts are manufactured from a composite material to save weight enabling you to swing faster. A couple of grams of weight-saving can add a few miles per hour to your swing speed and produce more distance.
How to increase speed on a golf swing?
Get wide early for speed where it counts. Start the backswing with your leading arm straight and keep the maximum width without compromising other swing mechanics .
Johwak121
It means that you'll have to reshaft them. At least that's what it means to me.
cigarnut81
Uniflex technology is there for the average or below average golfer. Most of us don't know our own swing speeds, and to tell the truth, 80% of us should be using a flex lower than what we say we should. I see way to many guys saying they need a stiff shaft when regular would really improve their game.
thewitt
The Uniflex shaft is a firm shaft - just a little stiffer than an R, but not much. Why do they do this? Because their target market for club sales is the 95% of all golfers who will never break 100, who will play 3-4 times a year for 10 years with these clubs, then give them to their kids and "upgrade" to whatever is new at the time. The Uniflex shaft works just fine for virtually all of these players... -t.
crazygolfnut
Even within Callaway they are different. I just got some X-20s with the Nippon NS Pro 990gh Uniflex Shaft which is different than their standard True Temper Uniflex. They also offer and Nippon NS Pro 1150gh Uniflex. They all play a little different so it just depends on what you want.
Greg77
Even within Callaway they are different. I just got some X-20s with the Nippon NS Pro 990gh Uniflex Shaft which is different than their standard True Temper Uniflex. They also offer and Nippon NS Pro 1150gh Uniflex. They all play a little different so it just depends on what you want.
Popular Now
Spring Cleanout... Stealth Plus, TSi3s, Ventus Blacks, Ventus Red, 300 Mini
