The pitching wedge is called #10 at Honma and the gap wedge #11. As a rule of thumb, it is worth taking the #11 iron with X, P and V and choosing two more wedges based on it (instead of 3). In the case of the TR20 P, recommended lofts would be e.g. 48° for #11, 54° for Sand Wedge and 58° or 60° for Lob Wedge.
What is the swingweight of the Honma GS ladies Irons?
The swingweight of the Honma GS ladies irons is C-6, which is of course much heavier than the C-1 of Honma Beres. In this respect, the Honma GS series is rather intended for female golfers who do not have too much difficulty accelerating the club.
Are Honma Irons worth the money?
There is hardly a second manufacturer whose irons cover such a broad spectrum as those from Honma. With the Honma Beres, ladies and seniors will find particularly light 38g shafts. And with the TR20 Blade, tour players also get their money's worth.
What is the strongest shaft on a golf iron?
For the ladies, the strongest iron is a 6 iron and all the rest are hybrids and fairway woods. The standard shaft length is 36 inches for the ladies' 7 iron and 37 inches for the men's 7 iron. The wedges from #11 to Sand Wedge are built the same length. This approach makes a lot of sense in our view for several reasons.
What is the loft of the Honma Beres Irons?
The lofts are very "modern", i.e. low, especially for the men's irons. The 7 iron has only 27° and the reason for this is that the launch of the Beres irons is optimised in such a way that a high ball flight is given despite the low loft number. Especially considering that most Honma Beres players tend to hit the ball in an upward motion.
What degree is a Honma 11-iron?
Honma TR20 VIron#3#11Loft in °19.549Lie in °60.564.0Face Progression in mm3.8
What is Honma a spec?
The BERES line is the pinnacle of HONMA craftmanship and is unequalled in the golf industry. The A-Spec features elegant profile, brilliant etching and textures, fine detailed badges and exclusive paints.
How much do Honma irons cost?
The irons start at $400 per iron and go up to $4,950 per club (5- through 11-iron, gap wedge and sand wedge).
Is Honma forgiving?
But for the right player, the T//World GS is Honma's longest, most forgiving iron model.
How many degrees is a Honma sand wedge?
56Product DetailsSKU:00845251MODEL:TW-W4FLEX:WEDGE FLEXDEXTERITY:RIGHT-HANDEDLOFT:56-12 Bounce 12 Sand 568 more rows
Why are Honma irons so expensive?
Premium Materials Used. Rather than using normal steel that is used to create most irons on the market, Honma uses a special, strong steel that is much more expensive to make their clubs. The soft steel is felt at ball contact.
Who plays with Honma clubs?
Currently there is 1 PGA Tour player among the top players in the world playing Honma clubs or other Honma equipment. This list includes players like Charl Schwartzel....Honma Tour Players.Honma Irons:Charl SchwartzelTW 747VSee all Honma Iron players >>
Where are Honma irons made?
JAPANAll the HONMA "Made in JAPAN , Sakata" clubs are produced at the Sakata Plant. While this is one of the largest plants of its kind in the world, the word "Studio" is more fitting than "Factory".
Are Honma irons worth it?
These are great clubs to consider if you are in need of a draw bias and have a slower swing speed. Honma clubs are at a much more affordable price than they used to be, and they perform just as well as any brand on the market, if not better.
What is Honma 10 iron?
pitching wedgeThe 8 through 11 irons (in Honma's nomenclature, the 10-iron is a pitching wedge and the 11-iron is a gap wedge) are designed for optimum spin to control the ball when it lands on the green by increasing contact time with the grooves while maintaining forgiveness, Suzuki says.
What are the easiest golf irons to hit?
Quick Overview: Our Top Picks for Most Forgiving IronsCleveland Launcher HB Irons. Confidence-inspiring look and feel. ... TaylorMade Golf P790 Iron Set. ... Cobra F Max Irons. ... LAZRUS Premium Golf Irons. ... Callaway Golf 2020 Mavrik Iron Set. ... Mizuno JPX921 Forged Irons. ... TaylorMade SIM 2 Max OS Iron Set. ... TaylorMade Golf M4 Irons.
What is the strongest iron in Honma Beres?
For the ladies, the strongest iron is a 6 iron and all the rest are hybrids and fairway woods.
What is the best iron for a ladies 7 iron?
For the ladies, the strongest iron is a 6 iron and all the rest are hybrids and fairway woods. The standard shaft length is 36 inches for the ladies' 7 iron and 37 inches for the men's 7 iron. The wedges from #11 to Sand Wedge are built the same length. This approach makes a lot of sense in our view for several reasons.
What is special about Honma Beres?
The special thing about the Honma Beres is that the shafts are very soft, but still of high quality. The unwanted twists in the shaft are minimal. The higher the number of stars, the less severe these twists are. However, the shafts are also more complex to produce and therefore much more expensive. You can see that the swing weight ...
Is the Honma GS offset?
The Honma GS have slightly less offset than the Honma Beres. In contrast to Honma Beres, the GS range is also available with steel shafts such as the Nippon 950 Neo. With this, the swing weight is already at D-2 and is therefore mainly suitable for amateurs with average club head speeds.
Does the TR20 B have a gap wedge?
Only the TR20 B has no gap wedge and the pitching wedge ends very classically at 47°. With the TR20 P there is no 3 iron and it is advisable to use a driving iron or hybrid instead. The same applies to the TR20 V and also the TR20 B. Hardly anyone still plays such long irons.
Is Honma GS lighter than Beres?
However, the overall concept of Honma GS is just as coherent as Beres and in terms of s hafts and swing weights, it is also much lighter than irons of most competitors. The swingweight of the Honma GS ladies irons is C-6, which is of course much heavier than the C-1 of Honma Beres.
Who designed the Honma TR20 B irons?
When you realise the Honma TR20 B irons were designed with input from Justin Rose, the player profile is pretty obvious. Only tour players, elite golfers and those who feel they shape a high percentage of shots need apply.
How many irons will be in the 2021 golf cart line up?
Most major brands have five, six or even seven irons in their 2021 line-ups, which shows the importance of having solutions for all golfers, irrespective of ability or personal preference. Choices range from slimline musclebacks to hollow heads and cavity backs, and while some are forged, others have springy faces just like a driver.
What is a Honma hybrid?
Honma’s entry-level hybrid is specced to perform for all players. The Beres 2 Star hybrid has redefined the genre, with an ARMRQ shaft that is formulated to match the hybrid’s head and produce extreme performance for slower swing speeds.
What shafts are used in the Beres 2 Star?
High launching and forgiving, the Beres 2 Star fairway and woods feature ARMRQ shafts that are precisely matched for torque and kickpoint characteristics to deliver unbelievable performance off the deck or tee.
How many degrees of loft is a 10 iron?
The lofts are strong on these clubs: the pitching wedge or, as Honma has them, the 10 iron, is at 43 degrees of loft. For comparison, most manufacturers have their pitching wedge lofts at around 46 degrees.
Who is the wedge wizard in Honma?
Anything you want, they will get and put it in their clubs. You will have to pay for it, of course, but you are not limited to stock options. Honma has also brought Jacob Sanborn, aka “Wedge Wizard,” a legend in the wedge customization world, on board. He is now making custom stamped and finished wedges.
What does a Honma driver look like?
Most manufacturers leave the carbon weave pattern on the crown, but Honma makes it look like a traditional driver. Once you turn the driver over, you see the tech. There is a three-position weight system, which allows you to change the flight between high, low, and draw.
Where is Honma made?
History. The company was founded back in 1959 by the Honma brothers in Yokohama, Japan. In 1981, the company moved to Sakata, in Yamagata prefecture. The Sakata site is where manufacturing continues today for Honma products.
Does Honma make custom shafts?
Honma Golf also makes amazing custom shafts in the FD, mid flight, and the FP, lower flight. These shafts spec out closer to normal US market shafts and should be strongly considered, especially if you do not want to change shaft weight or flex.
