
Corner cutting is how much a puzzle can make a turn before completing a previous turn. For instance, turning the U or upper layer 45° then turning R or right layer 90° clockwise on most modern cubes will cause the U layer to snap" or cut the corner.
Full Answer
How do I turn in a go kart corner?
Here is the basic approach to a corner: Place your kart on the outside of the track, staying on the gas. Ease onto the brake firmly staying in a straight line (this is called threshold braking) Come off the break and ease back onto the throttle as you start your turn in
What to do if your golf cart keeps cutting out?
Check if the voltages in both the batteries are at the designated levels. Also, if the water in the batteries has dried up, it could cause this issue. Check for the electrolyte and water levels in the batteries. Make sure that you are not overcharging or undercharging your batteries as these could also cause your cart to cut out.
What is corner cutting and why is it important?
What is it? Corner cutting is how much a puzzle can make a turn before completing a previous turn. For instance, turning the U or upper layer 45° then turning R or right layer 90° clockwise on most modern cubes will cause the U layer to snap" or cut the corner.
Does your golf cart cut out at high speeds?
Have you been experiencing any of the above issues with your golf cart? Some people have experienced these issues where the golf cart works properly at normal speeds, but cuts out when driven at high speeds. If your golf cart cuts out at high speeds, then you might have to take a look at the internal mechanism to figure out what the issue is.

Is a lifted golf cart better?
Lift kits for golf carts give your cart higher ground clearance, which is great for driving through rougher terrain. It also gives you a more stable riding stance, and you can fit larger tires and offset wheels on your cart. Even a lift of as little as two inches can make all the difference in your ride.
Do lifted golf carts go faster?
Additional Options for More Speed Some golf cart owners with a true need for speed will opt to use a lift kit or block lift so that they may install even larger tires. This may add a bit of expense, but a lot of extra speed.
What is difference between ezgo TXT and Rxv?
The main differences between the EZGO RXV and TXT are that you can customize the RXV a lot more than the TXT. The RXV also has more horsepowerat 4.4HP, while the TXT only has 3HP.
How can I make my golf cart more stable?
Drop Spindle kits are used to replace and increase the golf cart spindle size and length. This can give your golf cart a wider stance, and increase the stability. The wider stance is perfect for those looking to fit those big off-set wheels on your cart, which in turn, can allow you to add wider and taller tires.
How fast can a 48V golf cart go?
The standard 48v golf cart will travel between 12 to 14 mph. However, if you apply modifications to the vehicle you can expect top speeds of 20 to 24mph.
Can I put bigger tires on my golf cart?
Lifted golf carts can fit ANY 8” tire, low profile OR high profile. In addition, lifted golf carts can fit any high profile tire measuring at 10”, 12” or 14”. Lifted carts will be able to take 20", 22", 23" and in some cases 24" all terrain tires.
How do you tell if my EZGO is a txt?
Where your manufacturer's code is located generally tells you which EZGO model you have (i.e.: TXT, RXV, Marathon, etc.). On many of the newer EZ-GO's, they will have the words "TXT", "Freedom TXT", "RXV" or "Freedom RXV" listed on the side of your golf cart.
What does Rxv stand for?
RXVAcronymDefinitionRXVRear Crossview Mirror (vehicle safety system)
How fast will a EZGO Rxv go?
9 Popular Golf Carts And Their Top SpeedGolf Cart ModelTop Speed In Miles Per HourEZ Go Express L616.5 mphEZ Go RXV15 mphEZ Go Shuttle 8 EFI16.5 mphCushman Hauler 80014.5 mph5 more rows•Aug 20, 2019
What size lift should I put on my golf cart?
A 6” golf cart lift is the most popular lift kit on the market as it gives you the highest clearance over rough/rugged terrain AND can typically accept a 23” all terrain tire (basically, the meatiest, tallest tire you can get). 3” golf cart lift kits usually are not big enough to add the big rough tires.
How do you make a golf cart go faster?
6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.
What does it cost to put a lift kit on a golf cart?
A lift kit for a golf cart is usually priced around $250. If you install the kit yourself, then your expenses will end there. If you need to hire someone to lift your cart, on average, this will cost you about $75.00 per hour. Lifting a golf cart is a job that will take a few hours.
Why is corner cutting important?
Corner cutting is great for saving time, but it can potentially cause issues with the cube, even if the cuber is careful. Different cubes have different qualities that make them subject to movements that can get the cube stuck. Below is a list of possible scenarios that can happen when corner cutting.
What happens when you cut corners?
The final issue that can happen when corner cutting is “popping”. This means that a piece of the cube (usually the corner) will literally pop out of the cube. Thankfully, speedcube pieces are easy to pop back in, but doing so in the middle of a solve is not possible.
Why does my speedcube have a corner twist?
Corner cutting with speedcubes can lead to corner twists. The main reasons that contribute to this issue are rounded corners or very loose tension. Naturally, this corner twist prevents the cube from being solved , but thankfully it is easy to fix, without damaging the cube at all.
What is the basic technique of a go kart?
Fundamentals of the go-kart cornering technique are braking consistently and throttle awareness.
When turning a kart, do you lean forward?
When turning, don’t lean forwards towards the apex of the curve. It strains your inside wheels as it puts more weight on them. Instead, lean back on the back wheels to make the kart easier to straighten after the turn.
What happens if you let go of a go kart?
It is crucial since if you let go suddenly, the kart may spin violently, and you can’t regain control. In case it happens, stay calm and try to gain control back by stepping on the brake slightly. Click here to learn more about the go-kart braking technique, tips, and tricks.
When to use late apex in go kart?
It is used when you are relatively confident in winning the race to braking at the corner. If you are at a fast corner, the late apex is useful. A tip for when using the late apex is that it helps you catch the turn just in time.
What is the breaking point of a racing line?
The breaking point, it is the position you start to brake before a corner. The turn-in point is where you turn in the corner, reasonably straightforward.
What is a racing line?
A racing line is what a racer follows for the fastest route moving through the corner. Knowing how to utilize the racing line is crucial in the world of go-kart racing.
Can everyone be at the same apex in a go kart?
Time for some more advanced go-kart cornering techniques. When racing, everyone can’t be at the same part of the apex at the same time. So, pro racers have come up with ways to utilize different parts of the apex.
How to get a kart to turn in a corner?
Here is the basic approach to a corner: Place your kart on the outside of the track, staying on the gas. Ease onto the brake firmly staying in a straight line (this is called threshold braking) Come off the break and ease back onto the throttle as you start your turn in.
How to turn a kart?
Here is the basic approach to a corner: 1 Place your kart on the outside of the track, staying on the gas. 2 Ease onto the brake firmly staying in a straight line (this is called threshold braking) 3 Come off the break and ease back onto the throttle as you start your turn in 4 Aim for the inside edge of the track on entry 5 Maintain consistent power through mid turn 6 You should be closest to the inside edge through mid turn 7 Ease on the throttle and use all of the track on exit
What is trail braking on a go kart?
Trail braking allows you to rotate the rear end of your go kart into a corner. The technique works really well when you are past the standard braking point and close to the corner entry. It is the key braking technique to master for a fast and efficient turn entry, but its also the most difficult and dangerous.
What is a racing line in kart racing?
The racing line is the route a kart racer follows in order to move through the corner in the quickest possible manner. Utilizing all of the available space on the track, a go kart can move in a straight line and then increase speed before reaching the traction limits on the tires. More info here.
How to approach a corner?
Your approach to a corner should be a wide approach in a straight line and fully compressed on the throttle. Then applying your braking technique on the straightway through the braking zone. For most corners your turn in begins when you see the apex.
What are the parts of a corner?
Three Parts of a Corner: Entry, Apex, and Exit. Despite corners having different angles, shapes, and names they can all be broken down into 3 distinct parts. The Entry (the turn in), the Apex (the mid point), the Exit (the turn out). Each part of the turn requires different driving inputs.
How to get faster in a go kart?
The Basic Racing Go Kart Cornering Strategy. Getting fast depends totally on your ability to be smooth! Any sudden movements on the brake, throttle or steering causes resistance and slows you down through the corners. It takes practice and seat time in your kart. But the smoother you get, the faster you’ll be.
What is a golf cart made of?
The body of a golf cart is primarily made of sheet steel, fiberglass or sheet aluminum. The frame is generally made of steel while tires, foam seat cushions and steering mechanisms are made of rubber, vinyl and metal. Parts like suspensions, drive trains, motors and brakes use metal. The 1993 model Club Car used an indestructible thermoplastic ...
How to restore a golf cart?
Steps. Apply some dish soap all over the golf cart and wash it using a hose fitted with a fine spray nozzle. Use a microfiber cloth to spread the dish-wash soap uniformly, both inside and outside the cart. Take some water in a bottle with a spraying mechanism and spray on the surface that has to be restored.
How to paint a dark cart?
Apply a thin coat of plastic primer spray paint on the surface to be painted. You might need an extra coat if you’re planning to give your dark colored cart a light color. In this case, give a drying time of about half an hour before you apply the second coat. Paint the cart using acrylic or plastic-fusion paint.
How to repair a crack in a golf cart?
You can try the following options to repair cracks on a plastic golf cart body. Drill through the crack in a V shape and put a plastic weld on the rear. Fix some plastic tape on the front side so that the weld doesn’t push through. Drill the crack at the end so that it doesn’t become bigger.
How to clean a golf cart with soap?
Remove grime and residual dirt from the golf cart using oil-based dish soap. Wash the soap off using cold water from a hose. Wipe the cart using a towel and let it dry completely.
Why does my golf cart cut out?
Another reason why golf carts can cut out is due to problems with the battery voltage or water levels.
What happens if you charge your golf cart?
You would have charged up your cart fully but after driving it around for an hour or two, the power would have got drained off completely. If this is a frequent occurrence with your cart, then you will need to take a look at the batteries.
How to check battery water level in golf cart?
How to Check Battery Water Levels in a Golf Cart. Check if the voltages in both the batteries are at the designated levels. Also, if the water in the batteries has dried up, it could cause this issue. Check for the electrolyte and water levels in the batteries. Make sure that you are not overcharging or undercharging your batteries as these could ...
Why does my cart have a loose solenoid?
If the connections from the solenoid have become loose or if there is some other loose contact, the cart might behave in this manner. It can also be caused by a faulty motor or a faulty key switch.
Why does my golf cart keep powering off?
If the cart starts powering off after a new installation, then you will know that the issue is caused due to errors with the installation.
Can you fix a golf cart on your own?
Under NO circumstances should you attempt to fix your golf cart on your own. Doing so is dangerous and could result in serious bodily harm. The information on this website has not been verified for accuracy and should only be used for general information purposes only. Use this information at your own risk.
Does my cart stop suddenly while driving?
Does your cart stop suddenly while driving and give out beep sounds? Well, you may not be the only one experiencing this. A lot of people have reported that they have experienced their carts stopping suddenly and giving out beeps. In some cases, the carts have started running again after the beep sounds stop.
Drive
The drive, or primary, clutch is found on the crankshaft of the engine. A thick, heavy ‘drive’ belt is wrapped around it and links it to the driven clutch, on the differential. At rest, the drive clutch sheaves (or pulley halves) are separated enough that the drive belt rests in between the sheaves & against the center shaft of this clutch.
Driven
The other half of this system is the driven, or secondary, clutch. At rest the driven clutch sheaves are spring loaded together, so the belt sits up at the outer edge of this clutch, NOT down toward the center shaft. It, too, spins around and has a sheave that sides in & out along it’s main shaft but this clutch has no flyweights.
Belt Operation
As the drive belt forces the driven clutch sheaves to separate, the PULLING ratio of the engine changes from maximum (when the belt is at the outer edge of the driven unit) to minimum PULLING power, or top cruising speed (when the sheaves are completely apart).
Driven Issues
The driven clutch can misbehave in many ways. It has one main shaft and the sliding sheave has an internal bushing that will wear, and it has several inclined metal ramps (usually aluminum) with small plastic buttons that protect the ramps as they glide against one another.
Buttons
OK picture this: The engine revs up and the drive belt starts to ride down into the pulley faces of the driven clutch forcing them to separate. The inboard pulley half begins to slide along the main shaft compressing the spring and bringing the funky cup ends and their respective ramps up against one another.
Driven Spring
While we are on the Yamaha driven clutch another failure that occurs is almost impossible to detect but it also impairs the hill pulling power of the car. Keep looking inboard to where the funky spring cap butts up against the differential housing. The spring cap doesn’t actually touch the differential case.

Introduction
- You may have heard other cubers talking about "corner cutting" and wondered "what is that?" In this article, we explain what the term means, what puzzles have corner cut the best, and how much it matters when solving.
What Puzzle Is The Best?
- Most of the modern puzzles from 2016 onwards have very good corner cutting, starting with the Valk 3 3x3, released back in 2016. Even budget puzzles nowadays can cut past 45 Some notable recent budget puzzles that have exceptional corner cutting include Some midrange puzzles we love for their corner cutting are Read our full article on what is the best speed cube?
How Much Does It Matter?
- You may find a marginal improvement with puzzles with higher levels of corner cutting if you have an accurate turning style. However, you may find it more enjoyable to turn these puzzles as they are much more forgiving - especially in a competition environment where nerves are high. If you have very rough turning, you will find a lot of benefits in puzzles with better performance, as you…
Conclusion
- Corner cutting is where a turn on a puzzle is not fully completed before another turn is made on the puzzle
- No puzzle is necessarily the best - most modern puzzles have corner cut over 45° with little to no effort
- If you have inaccurate turning you may benefit a lot from puzzles that corner cut well to com…
- Corner cutting is where a turn on a puzzle is not fully completed before another turn is made on the puzzle
- No puzzle is necessarily the best - most modern puzzles have corner cut over 45° with little to no effort
- If you have inaccurate turning you may benefit a lot from puzzles that corner cut well to compensate for inaccuracy in your turning
The Racing Line
Braking Early
- If you are hesitant about your skills at first, it is better safe than sorry. It’s best to estimate the braking point earlier, then let the brake off slowly at the turning point. It ensures you make the turn and not spiral out of the track when attempting to turn. Braking is one of the most important things to learn when practicing karting. Once you get the hang of it, try decreasing the braking p…
Turning and Steering The Kart
- When getting near the corner, do not start steering too early. In this case, being patient is critical. Slowly increasing the turning rate and speed, making sure your movements are smooth despite feeling the pressure. Doing so will help you not spin out of the track and approach the apex in record time! A massive error that rookies make is they panic and start pulling or pushing the wh…
Different Apexes and Racing Strategies
- Time for some more advanced go-kart cornering techniques. When racing, everyone can’t be at the same part of the apex at the same time. So, pro racers have come up with ways to utilize different parts of the apex. The middle apex is ideal since it carries the highest speed into turns, but it’s not always available. One of the go-kart cornering techniques is to use the early apex to o…
Things to Avoid When Cornering
- Now, we have all the theoretical stuff out of the way. It’s time for some tips on cornering. Having a proper go-kart cornering technique is no easy feat; you need proper posture and experience. Thus, cornering is one of the easiest places to crash, as the kart spins out of control easily.
How to Improve Cornering Skills?
- So, how do you improve at your pre-existing go-kart cornering technique? Here is the tough answer; practice is the only way to understand corners better. Try and challenge yourself with the timing at the apexes and corners. The most crucial part of turns is braking and accelerating, changes to those will drastically change your time. When approaching a corner, try visualizing di…
Conclusion
- Mastering the art of the proper go-kart cornering technique isn’t easy. But it plays a vital role in every single race, by reducing lap times. Whenever you get frustrated with cornering, remember that it’s not easy, and it needs constant practice. Racing on the track gets the adrenaline pumping like no other, many people have devoted their lives to this passion. And with these tips, hopefully…