Below is an illustration of a cup face construction to contrast against the above edge welded face design. The purpose of a cup face construction is to improve the amount of face flexing for areas off the center of the face to achieve a higher ball speed and from that, better distance, performance and a more solid feel from off center hits.
What is a cup face?
What is facial cupping? Cupping is an alternative therapy that uses suction cups to stimulate your skin and muscles. It can be done on your face or body. The suction promotes increased blood circulation, which may help relieve muscle tension, promote cell repair, and aid in other regeneration.
What is 360 cup face technology?
The 360° Face Cup technology results in a much thinner perimeter face join to the body of the head. More of the face retains enough face flex to generate fast ball speeds and the consistency of distance approach shots require.
What are the 3 types of clubs in a golfers bag?
There are other types of golf clubs available, but the most common setup is with those we've discussed: driver, wedges, 3-wood, 5-wood, putter, 5-9 irons, and 4 hybrid. You can choose any combination of clubs you'd like. Golf club sets are unique to the individual.
Why is a driver club face curved?
The curved face of your driver – a design feature called “bulge and roll” – helps your mishits through gear effect. Ever wonder how some of your worst drives still, somehow, manage to find the fairway? No insult to your golf swing, but your golf clubs have a lot to do with that.
What is Callaway Cup face?
0:051:32360 Face Cup Technology in Callaway Irons - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the face is suspended really on a light suspension. All around 360 degrees gives us moreMoreSo the face is suspended really on a light suspension. All around 360 degrees gives us more flexibility more speed.
Do I need a 5 wood and a 3 hybrid?
8:0911:10SHOULD YOU PUT A 5 WOOD OR 3 HYBRID IN THE BAG? - YouTubeYouTubeStart of suggested clipEnd of suggested clipBack with the shaft lengths being a little bit shorter. But certainly launching lower even thoughMoreBack with the shaft lengths being a little bit shorter. But certainly launching lower even though both had 18 degrees of loft.
How far should I be hitting a 6 iron?
You should hit a six iron about 150 yards. The average golfer gets just over 150 yards with their six-iron. Players with faster swing speed will get closer to 165 or even 170 with a six iron.
How many clubs should a high handicapper carry?
Highly skilled golfers are capable of playing more specialized clubs and playing a wider variety of shots. The rules of golf allow you to carry a maximum of 14 clubs in your bag. That doesn't mean you have to carry 14, however, as you can carry fewer if you wish.
Why are golf drivers not flat?
Driver Bulge A clubhead's horizontal curvature is known as its bulge, which is designed to partially counter the gear effect. If you hit the ball closer to a driver's toe, the face imparts sidespin that causes the ball to hook -- curving to your left, if you're right-handed.
Where is the sweet spot on a driver?
On almost every driver we test, the sweet spot that creates the highest ball speed is slightly towards the toe and slightly up from the center of the face. If you miss your shots high on the face, the ball will launch higher, spin less, and you will lose ball speed.
What are golf clubs with flat heads called?
Irons. Irons come in a variety of lengths, but all are generally made of solid metal and have flat faces with more loft than woods. They are intended for shots requiring more accuracy than woods; the flat faces and increased loft result in shots that do not travel as far but stop more quickly once they land.
What is a golf club head?
The golf club head is the “business end of the stick.”. There are different types of club heads that have different purposes. The Driver, or wood, is a larger club head suited to distance shots from the tee and fairway. The Iron has a smaller, flatter club head. Golfers use irons to advance the ball down the fairway, out of sand traps, ...
What was the first wood used in golf clubs?
In the 1800s the game migrated to the United States. Players used to carry 20 – 30 different clubs made of wood and hit “featheries” – hard leather, feather-stuffed balls. In 1856, Robert Forgan used American hickory trees to make golf club shafts. Persimmon wood was the primary material used for golf club heads until the late 1800s.
What is the purpose of irons in golf?
Irons. Irons are the short game clubs. Golfers use irons for different types of shots from the fairway, out of the rough at the edge of the course, and for escaping from sand traps. They have a shorter distance rating and increased loft.
What is a driver in golf?
Drivers. The 1-wood, known simply as the Driver , is the club most golfers choose for drives off the tee. Drivers have a slightly-angled face to keep a lower ball trajectory and achieve greater distance. The driver is usually the largest club in your bag. It has a bulbous head and a flat face.
What is the difference between an iron and a putter?
The Iron has a smaller, flatter club head. Golfers use irons to advance the ball down the fairway, out of sand traps, out of the rough at the edge of the fairway, and onto the green. The putter is a flat-faced club used for putting the ball along the closely-cropped manicured area of the green and into the hole.
Why is it important to keep your golf clubs clean?
Keeping your equipment clean is important for your game. Dirt may often pack the grooves in your club face. Because the grooves aid the spin of your ball , it is important to keep them clean. Most golfers carry a small towel to wipe their clubs after every shot.
When was golf invented?
The modern game of golf was born in 1913 when amateur Francis Ouimet out-played British master Harry Vardon in the U.S. Open played in Brookline, Mass. Ouimet was a former caddie and local boy who lived across the street from the course. Vardon was the predominant player in the field at that time.
What is the clubface of a golf club?
Clubface. Located at the front end of the clubhead, the clubface – or face of the club – consists of a flat surface that is meant to strike the ball. The angle at which that surface is inclined, called the loft, varies from club to club; the putter will see a completely flat face while a wedge will see a pronounced angle ...
Is a putter a short club?
For example on a putter, the clubface is very short yet golfers don’t encounter difficulty hitting the ball, thanks to the fact that the putter is a club that moves very slowly and on a tight arc close to the ground.
What do designers and engineers see in a golf club?
Designers and engineers don’t see just a sketch, they see the movement of mass, the change of center-of-gravity, the balance of the club. From the sketch, they get an idea of how the club might perform and how it will impact the ball.”.
What are the components of a golf club?
You need to be up to speed on the materials and manufacturing processes used in the production of the components that make up a golf club – namely the clubhead, the shaft, the grip , and how they are assembled to a final, finished series of specifications.
How many clubheads has Tom Wishon designed?
Tom Wishon, who has designed more than 220 original clubhead models, told My Golf Spy that when he began working in the industry back in 1986, ...
Epic Flash vs. Epic Flash Sub Zero
So far, Callaway has announced the Epic Flash and Epic Flash Sub Zero. The Epic Flash Star -- a lighter clubhead for slower swing speeds, popular in Asia -- hasn't been announced yet, but it's potentially coming.
Pricing and availability
The Callaway Golf Epic Flash and Epic Flash Sub Zero drivers are available Feb. 1, for $530 each. Pre-orders start Jan. 11
Fairway woods, too
A new driver announcement wouldn't be complete without complementary fairway woods, and there are Epic Flash and Epic Flash Sub Zero metalwoods to accompany their driver cousins.
