In terms of efficiency, clutches work better than torque converters as they can be up to 100% efficient. Besides, clutches handle high torque which enables them to run faster. Also, there are various multi-disc go-kart clutches that even allow you to drive in conditions that demand more gear variation ratio. Features of a Centrifugal Clutch
What is the difference between a centrifugal and torque converter go kart?
Lower gear ratio means your go kart can move quicker and can climb uphill. A centrifugal clutch, on the other hand, is a simple mechanism with a single gear-ratio drive system. Unlike the torque converter, which has a low and high gear, the clutch is always in high-gear; this results in the weak take-off power of clutch karts.
What is the difference between a clutch and torque converter?
More power will get you farther in a longer duration whereas more torque will help you accelerate better, therefore a clutch will be faster and the torque converter will give a better take-off.
What is the best torque motor for my golf cart?
This is an excellent option if you're looking for more torque in your Club Car, EZGO or Yamaha golf cart, but are not so concerned about the speed. Series Wound DC Speed Motors have a much smaller field coil than that of the Series Wound DC Torque Motor.
How to make a golf cart faster?
6 Ways You Can Make a Golf Cart Faster 1 Add More Torque to Your Golf Cart 2 Upgrade Your Golf Cart's Motor 3 Improve the High-Speed Controller of the Cart 4 Add Better Golf Cart Tires 5 Use a Higher Powered Golf Cart Battery 6 Watch the Weight in Your Golf Cart
What's faster centrifugal clutch or torque converter?
Generally speaking, racing go-karts are most commonly equipped with a clutch that perform better at high RPMs and achieve higher top speed. On the other hand, torque converters are more common in off-road go-karts that are most used to heavier loads and lower speed ranges.
How much HP can a centrifugal clutch handle?
NORAM centrifugal clutches are designed to fit engines ranging from fractional horsepower up through 50 HP applications.
What speed does a centrifugal clutch engage?
A clutch starts to engage around 2,000 rpm and will lock up around 2,600 rpm. Driving at full throttle gives the clutch a chance to cool down. Full throttle locks the shoes in the clutch against the drum.
What does a torque converter do on a golf cart?
This High Torque Power Clutch Spring provides more low end torque for your golf cart. This allows the golf cart to go up hills easier and allows for a smooth get up and go start.
Do you oil a centrifugal clutch?
0:001:00How to Oil Centrifugal Clutch - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it back on there you can turn it a few times. And then put the snap ring back on or if you'reMorePut it back on there you can turn it a few times. And then put the snap ring back on or if you're just in a quick pinch you need to get a little bit of oil on your clutch.
How do I choose a centrifugal clutch?
0:051:54Choosing the Right Centrifugal Clutch - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou've got your your 3/4 41 your 3/4 35 your 5/8 41 and your 5/8 35 to determine which size whichMoreYou've got your your 3/4 41 your 3/4 35 your 5/8 41 and your 5/8 35 to determine which size which size hole you need you're going to just lay your tape measure across.
What are the advantages of centrifugal clutch?
Advantages of Centrifugal Clutches/Friction ClutchesAutomatic – Centrifugal clutches automatically engage and disengage. ... Lower costs – Centrifugal clutches are relatively inexpensive compared to other clutch types.More items...•
How can I make my centrifugal clutch engage faster?
1:112:10Go Kart Clutch Adjustment For Higher RPM - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust use some wire cutters or something to open up one of these loops. Once I opened up one of theMoreJust use some wire cutters or something to open up one of these loops. Once I opened up one of the loops. To allow this to come apart.
Why would you use a centrifugal clutch?
The primary purpose of a centrifugal clutch is to connect the power source (engine, motor, turbine, etc.) to the load that is accelerated. It uses centrifugal force to turn the driveshaft and acts as a transmission activated by the increasing rpm of the engine.
How do I make my golf cart faster?
6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.
How can I make my electric golf cart go faster without upgrading?
How to Make an Electric Golf Cart Faster Without UpgradesWash Your Cart Properly. ... Inspect the Batteries. ... Refill the Battery Water. ... Check the Gas Pedal and Linkage. ... Measure the Tire Pressure. ... Charge Up Your Battery Unit. ... Lighten Up Your Cart's Weight.
How do I make my gas golf cart go faster?
How to Make Your Gas-Powdered Golf Cart Faster [Updated, 2022]1 Use A Better Golf Cart Battery.2 Increase Torque.3 Upgrade the Golf Cart Motor.4 Install a Torque Converter.5 Install a Higher-Performance Clutch.6 Tweak The Governor.7 Install A Cold Air Intake.8 Get Bigger Golf Cart Tires.More items...•
What is torque converter?
A torque converter is a mechanical device that is attached to the side of the engine. As you can see in the image above, it runs on a two-pulley system. The smaller pulley, called the driver pulley, is attached to the engine’s crankshaft. The larger pulley is referred to as the driven pulley. The driver pulley is connected to ...
What is a go kart clutch?
On the other hand, a go-kart clutch is a non-variable transmission. This means that it has a fixed gear ratio, which is set by the crankshaft sprocket and rear axle sprocket sizes. The gear ratio remains the same across all RPM ranges of the engine.
What is a transmission in a go kart?
A transmission provides controlled mechanical power from the engine to the rear axle of the go-kart. You’ll most likely come across go-karts that use a torque converter or a clutch, as a transmission. When it comes to transmissions, there is a long-standing battle between torque converters and clutches. There is no doubt that both of these ...
Does a go kart move?
This means that even though the engine has started, the go-kart doesn’t move. Once the engine reaches an RPM of about 1,500+ the driver pulley starts to clamp on the belt, which in turn engages the driven pulley. The rotational force is subsequently applied to the jackshaft and rear axle, giving your go-kart motion.
Is a torque converter the same as a clutch?
A torque converter has the same function as a clutch. They’re both different types of go-kart transmissions, but they each have their own distinctive advantages. Before we explore them further, let’s take a look at how both transmissions work on a go-kart.
What is a torque converter for a go kart?
A go kart torque converter is an automatic transmission that gives you great power from your engine which makes it perfect for off-road settings. A torque converter can be driven in a low gear which is ideal for going uphill and going slowly, as you pass through ditches.
How fast does a clutch kart go?
A clutch kart needs to be driven at 5 to 6 mph, or faster to prevent the clutch from burning out.
What does it mean when a go kart is in low gear?
When the go kart is in low gear and is in low speed, more torque and power are transmitted. When in high speed, pulleys change to produce a lower gear ratio. Lower gear ratio means your go kart can move quicker and can climb uphill.
Why do snowmobiles use torque converters?
Snowmobiles and ATV’s with “automatic transmission” use a torque converter because it can automatically detect what gear its supposed to use based on the amount of gas that is being given to the engine and the terrain upon which the vehicle is being driven on.
How long should I drive a go kart?
Drive it at a low speed for 2 minutes and you will definitely break your clutch. Usually, a basic go kart has a centrifugal clutch, but because of its manageability, efficiency, and durability in off-road situations, the torque converter is preferred by many.
What is a go kart?
A go kart is a motor vehicle with four wheels and a small and low open framework. This vehicle is normally used for racing and when it comes to racing, the need for speed comes to mind. The question is “which allows for more speed?”.
Do go karts have live axles?
Live Axle. Go karts being driven on dirt have a torque converter because it allows for the go kart to have “live axle.”. Live axle is when both rear wheels of the go kart are pulling. This is desirable when driving on a dirt road. A clutch should not be used in a live axle because it will have a negative impact on the clutch and ...
How they work
The torque converter consists of 2 pulleys, a driver pulley, and a driven pulley. Apart from the pulleys, there is a belt that connects the 2 pulleys.
Racing Karts
If your purpose is to race on flat tracks and you have an engine like stage 1 predator or the Tillotson 212, that produces a high amount of power, then go for a racing clutch like a Norman GE Ultimate, but note that these racing clutches are expensive, only get one if you’ve got a high-performing engine.
Off Road
For off-road purposes, you have to use a Toque converter, a clutch should not even be considered in such situations.
Durability
With regular maintenance and correct setup, both the clutch and the torque converter can last for a long time, an original comet torque converter can last for 5-10 years, even the comet clones can last for 2-3 years or more on proper maintenance.
Pricings
There are tons of different options for you in the market. A stock clutch from Max-Torque (American Manufacturers) will cost around $40 while its Chinese clones on amazon are available for only $20-25. Check our best clutches list. for comparison between clone vs original.
How fast can a golf cart go?
Most new and used golf carts are made to go a top speed of around 15 miles per hour . Although that is the perfect speed for most folks, there is an equal amount (if not more) of folks out there who are looking to increase their golf cart top speed and go faster than 20 MPH let's say.
How to get more speed out of golf cart?
Upgrading tires and increasing your tire size is by far one of the most economical and easiest ways to get more speed out of your golf cart. Equally applied, this is a great solution for both gas and electric golf carts. If you install a tire with a larger diameter on your golf cart, the end result is a higher top speed.
How does a new battery work on a golf cart?
Simply put, most types of golf carts are designed to work with a range of different batteries. A new battery will increase a golf cart’s motor output. The result of the motor output increase is higher speed. Purchasing new batteries with a higher voltage maximum will increase your golf cart’s speed dramatically.
What is torque in motors?
You know what 'speed' is, of course, but what is torque? Torque is the pulling power of the motor and is a function of current. So, basically, the higher the current, the more torque.
Is there a catch all solution to increasing golf cart speed?
A golf-cart weighed down by unnecessary clutter and debris is not a happy golf-cart! In closing, something to keep in mind is: There is no "catch-all" solution to increasing golf cart speed / golf cart power. There are many factors to consider such as, how the parts, pieces and changes interact with your golf cart.
Can you install a torque motor in an electric golf cart?
Essentially, installing a torque motor or speed motor may not be the end solution. With that said, something that you will want to keep in mind as you are upgrading, are the two main/major electrical components within your electric golf cart, that play a huge role in your golf carts system:
Do you need a lift kit for a golf cart?
Note: Depending on the size of the tire and the make/model of your golf cart, some golf carts will require a lift kit to accommodate the size of the new tires. If you are unsure whether you need a lift kit for your golf cart before replacing them, we have an excellent Resource that discusses this topic in more depth.
How much horsepower does a golf cart need?
These vehicles will have motors with 5 to 10 horsepower, and controllers that can deliver 300 to 600 AMPS.
What is the most important part of a golf cart?
Even though the speed controller is probably one of the most important parts on your golf cart, not many people understand how they work or what they do. In this guide, we breakdown the speed controller so you have a complete understanding of their functions, and hopefully come out with the knowledge to make an educated decision on the type ...
Why is a speed controller important?
The Importance of the Speed Controller. The main objective for the speed controller is, as the name implies, to control the vehicle speed. Let’s say you try to operate that old DC motor without a controller. Any time you apply throttle, the full battery current and voltage is sent to the motor.
What is the function of a speed controller?
In addition to controlling the vehicles speed, there are a few other functions that speed controllers can offer, regardless of the motor you are using. Battery Current Limiter: This protects the battery from excessive discharge. This also pulls back the battery current as it depletes, which prevents cell damage.
Can you program a speed controller yourself?
Beyond the already mentioned functions of the speed controller, there are many other features available when programming the controller yourself. If you have a computer or a handheld programmer, then changing the settings on your speed controller is super easy.
Can you run a golf cart without a speed controller?
If your golf cart is running an AC or Brushless DC motor , you won’t be going anywhere without a speed controller. In these specific types of motors, electrical signals fire back and forth which reverse in direction at different times. This must stay consistent, and has to be timed precisely with the motors rotation.
How does torque converter work?
It improves the ratio by approximately 3:1 and can turn larger tires and drive at slower speeds without doing any damage to the clutch system. A torque converter is a more expensive system initially but it will last longer and is more trouble free when maintained. Restrictions.
How much weight can a centrifugal clutch move?
A good rule of thumb is the kart and driver (and passenger when it is a two seat kart) should not exceed 400 pounds.
What is the problem with driving a go kart?
Driving with the foot on the brake. This is a problem with new drivers that are unsure of themselves. When riding a go-kart for the first time, try to find an open area that has no obstacles that you have to maneuver around until you get use to the brake and gas pedals.
Why don't you want the sprockets out of alignment?
You don't want the sprockets out of alignment because this will cause the chain to come off or wear the sprockets unevenly.Leave about a ½" of play between the top of the chain and the bottom—don't pull the engine back where the chain is a tight as you can get it.
How long should a clutch last?
If it's installed on the engine crankshaft properly, without using the "magic hammer" to pound it on the shaft, using the right length key (1/2") and observing all the hints that are pointed out in this article, a clutch should last several years.
How to slow down a go kart?
To slow down a go-kart you would need to purchase a gear reduction unit, which is like training wheels on a go-kart until the driver gets use to how the go-kart handles .
How many teeth are in a clutch?
This means for every tooth on the clutch there are six teeth on the rear sprocket. So if you count 10 teeth on the clutch there should be 60 teeth on the rear sprocket. (12 teeth on the clutch means a 72 teeth rear sprocket).