What is Spine Alignment? A spine can be visualized as a longitudinal line or plane on a golf shaft that is more resistant to bending than any other line or plane. By locating the spine it can be placed in a predetermined position.
What is spine alignment in golf clubs?
The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o’clock or 9 o’clock position – also called the neutral position.)
What is a spine in golf shafts?
A Spine should be visualized as a backbone or ridge in the golf shaft, running down its length, more resistant to bending than any other part of the shaft.
What is an Spining club?
Spining is a service to golfers offered by some custom club makers and some club fitters. Your first question might be: Do I really need to be concerned about that? We'll answer that question, but first a little more explanation about spining and how it is done.
What is the best orientation for the spine in golf?
Golf Shaft Spine Orientation There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation.
What is the spine orientation in golf?
Why do you need to spine align your shafts?
What is swing plane?
What is pure shaft positioning?
What is a vice in golf?
Do graphite shafts have spines?
Is golf a hard sport?
See more
Is spine alignment necessary?
Having proper alignment goes beyond maintaining a good posture — it can also help prevent long-term pain. Misalignment may impair your range of motion, and severe issues can affect your quality of life. There may be signs that your spine is misaligned, along with pain around several joints in the body.
Does golf shaft spine alignment work?
The shaft oscillates and if it doesn't do this consistently it can lead to misses. It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion. This process can also help improve the feel of your clubs during the swing.
Where do you orient the spine on a golf shaft?
1:503:31How to Find the Spine of a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're going to do is put our bearing on the shaft tip and bow downward then we're going to twistMoreAnd we're going to do is put our bearing on the shaft tip and bow downward then we're going to twist it and you can see River feel that it's going to pop in the same place each time. Then you want to
How do you install spine alignment in golf shafts?
1:183:24Super Golf - Spine Alignment - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake. It a bit easier cruising let's market there with a bit of masking tape for them. It's a nowMoreMake. It a bit easier cruising let's market there with a bit of masking tape for them. It's a now put a bit of pressure. Actually see it bounces quite severely from the back to this point. So now guys
What do you do if your spine is out of alignment?
Chiropractic adjustments, spinal decompression therapy, and other chiropractic methods can be used to address the misalignment causing these issues for pain relief and higher energy levels.
Do you need to spine a golf shaft?
Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining. ' Golf shaft makers today typically pre-spine their shafts, so spining is not as common as it once was after-market. Recreational golfers don't need to worry about spining their golf shafts.
How do you true a golf shaft?
5:0715:58How to FLO a Golf Shaft (correct position of shaft alignment) - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you find the spine the shaft. That this is the point that you line up at the 12 o'clock of theMoreOnce you find the spine the shaft. That this is the point that you line up at the 12 o'clock of the shaft with the golf head.
How do you make a spine Finder?
0:002:28How to Make a Shaft Spine Finder - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm just some technical director for a really good ball today I'm going to show you how to make aMoreI'm just some technical director for a really good ball today I'm going to show you how to make a homemade spine finding. Device. First thing we want to do is start out with some PVC tubing.
How do you pure a golf shaft at home?
How to Pure a Golf ShaftClamp the grip end of the club in a vise. ... Test the alignment of the spine. ... Tape a strip of masking tape around the shaft just above the club head. ... Remove the club head and grip from the shaft.Find the dominant spine of the shaft with a spine finder. ... Fit the club head and grip to the shaft.More items...
What is Flo in a golf shaft?
FLO is short for Flat Line Oscillation. It refers to the way a clamped shaft vibrates. If you clamp the butt of a shaft and put a weight (or a clubhead) at the tip, you will get some pattern to the vibration.
What is shaft Flo?
All Shafts have a Principle Plane of Oscillation The subject of FLO (Flat Line Oscillation) refers to how the golf shaft and is supposed to oscillate when loaded in your back swing through ball impact.
How do you pure iron shafts?
0:284:52Golf Shaft PUREing - Does It Actually Help? PURE vs Non PUREYouTubeStart of suggested clipEnd of suggested clipIt. Like they don't do any special procedure to the shaft they just spin the shaft.MoreIt. Like they don't do any special procedure to the shaft they just spin the shaft.
What position is the spine in golf?
The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o’clock or 9 o’clock position – also called the neutral position.) Indeed it does seem to make sense that if the stiffer spine is in ...
How many different directions does a golf club head bounce?
Then try it with a club that is NOT properly spine aligned. The difference is amazing…. the shaft/clubhead bounces all over the place, in about 50 different directions.
Is the spine stiffer on a golf shaft?
First, every golf shaft has a “spine”, and that spine is stiffer than the rest of the circumference of the shaft. (Nobody should argue that the spine is not the stiffest part of the shaft, but proof can be seen when rotating a shaft on a frequency machine. You get a stiffer reading when the spine is oriented the direction the shaft is deflected.)
What is a spine?
The spine is the part of the shaft that is more resistant to bending than any other part.
What can be done?
I start by finding the shafts spine, once found, I align and install the shaft into the club head so the spine works with your swing and not against it.
An added benefit
On a graphite shaft the normal position for the shafts spine is face up, this gives the shaft optimum resistance to shaft drop. (For info on shaft droop read up on the effect of shaft flex and club length on lie angles on the loft and lie page)
Some history
In February 1999 the golf’s governing bodies modified the rule on golf shafts that required all shafts to “bend symmetrically in all directions”, they decided it was no longer against the rules to orientate the shaft in the club head, as long as the shaft imitated the effect of bending symmetrically (you are not allowed to orientate the shaft to make a club that produces a draw or fade)..
Shaft orientation also know as spining, puring, or optimizing USGA Ruling
Because of a change in the interpretation of a USGA rule. Rule 4-1b states: b. SHAFT The shaft shall be generally straight, with the same bending and twisting properties in any direction Appendix II 4-1b states, BENDING AND TWISTING PROPERTIES.
Some science
An independent study on spine alignment was undertaken by Golf Science Consultants Inc, performed by J.
What Others Say
Tom Stine, PGA Tour Partners Magazine. September/October 2002: “The bottom line is that if the spines are not set in the club heads at the proper angle in relation to the clubface, we are not getting the most out of our golf clubs and we will continue to have golf clubs that will perform differently than others.
Why do golf shafts have spines?
A golf shaft is said to have a 'spine' if it is inconsistent in its stiffness when bending in different directions. Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining.'.
What is a spin in golf?
Updated February 06, 2020. "Spining" (one "n," as in "spine") is a term that applies to golf shaft s and describes a process of matching all the shafts within a set of clubs so that their most consistent bending positions all point in the same direction. Spining is a service to golfers offered by some custom club makers and some club fitters.
Why is spining important?
Spining was once a pretty important service provided by custom club fitters to highly skilled golfers and to other golfers who love diving deep into the technical side of golf equipment. But with the improved golf shaft manufacturing standards of today, is spining still important?
Do golf shafts have consistency?
Wishon continued: "While the top-quality shaft makers do manufacture shafts with very high accuracy and consistency, there are shafts in the golf industry that possess a variation in the consistency of the stiffness about their circumference. If severe enough, these inconsistencies can cause misdirection problems when the shaft is installed in such ...
Is spining golf shafts a service?
The answer to this question is easy: No. The spining of golf shafts is not something that any recreational golfer needs to be concerned about, nor is it a service on which any recreational golfer needs to spend money today.
What is the spine orientation in golf?
Golf Shaft Spine Orientation. There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation. The swing plane means that the spine is perpendicular to ...
Why do you need to spine align your shafts?
It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion. This process can also help improve the feel of your clubs during the swing. These all seem like outcomes most golfers would want to have in their bag.
What is swing plane?
The swing plane means that the spine is perpendicular to the clubface and the droop plane is parallel with the clubface. This is a piece of advanced club builder knowledge that can make a difference to the feel and performance of your clubs.
What is pure shaft positioning?
PUREing is probably the most famous method of optimising shaft positioning and it was invented by a company called SST (Strategic Shaft Technologies). PURE stands for P lane of U niform RE peatability. This is a proprietary process that they claim is accurate to one degree.
What is a vice in golf?
A vice holds the grip-end of the club so that you can test the club. Although it important to point out here that this should be done without a grip on the club. From there you need to find the balance point that gives the club perfect oscillation, then you need to mark the shaft.
Do graphite shafts have spines?
Yes, they do. Graphite shafts have come a very long way in a short period of time thanks to new manufacturing methods and materials. Graphite shafts actually have two spines, creative called “S1 and S2” by the industry. These are the two stiffest oscillation points.
Is golf a hard sport?
Golf is a hard sport to play and many things are uncontrollable during a round. A gust of wind, a bad bounce or other bad breaks are out-with your control.
