What does cc stand for in golf clubs?
CC stands for cubic centimeters. You’ll find the term ‘CC’ commonly used among golfers while talking about their golf clubs. This is a measurement that refers to the surface area of the driver’s head.
What does a 460cc driver mean in golf?
What does a 460cc Driver mean in golf? According to the USGA Rules for 2019, “The volume of the clubhead must not exceed 460 cubic centimetres (28.06 cubic inches), plus a tolerance of 10 cubic centimetres (0.61 cubic inches)” (Page 49). Ok cool, now what does that mean and why should the average golfer care?
What is the maximum volume of a golf driver?
“cc” stands for cubic centimeters and the USGA dictates the maximum volume a golf driver can be is 460cc According to the USGA Rules for 2019, “The volume of the clubhead must not exceed 460 cubic centimetres (28.06 cubic inches), plus a tolerance of 10 cubic centimetres (0.61 cubic inches)” (Page 49).
What is a driver in golf clubs?
The driver belongs to the woods category of golf clubs and is classically referred to as the 1-Wood. It is typically the longest club found in a golf bag and also sports the biggest head of any club. Its goal is to get the ball as far as possible towards the green.
What is a good cc for a driver?
Higher handicappers are best off using a 460 cc driver due to the enhanced sweet spot and amplified forgiveness. 400cc used to be the standard until the limit was increased making larger drivers a lot more common place.
What does 460 cc mean in a driver?
“cc” stands for cubic centimeters and the USGA dictates the maximum volume a golf driver can be is 460cc. According to the USGA Rules for 2019, “The volume of the clubhead must not exceed 460 cubic centimetres (28.06 cubic inches), plus a tolerance of 10 cubic centimetres (0.61 cubic inches)” (Page 49).
What does 400cc mean in golf?
Small head drivers are golf clubs with a smaller surface area compared to most other drivers. The surface area of a driver is generally measured in cubic centimeters or commonly referred to as cc. Small heads are available in 380cc to 400cc. On average, the largest drivers have a surface area of about 460cc.
What does 9.5 and 10.5 mean on a golf driver?
In theory, a 9.5 degree driver shot will travel lower at a greater speed with less backspin than a 10.5 degree driver when struck square. You must be sure that you have enough club head speed -- how fast the golf club is moving toward impact with the golf ball -- to warrant a lower lofted driver.
Is 9.5 or 10.5 driver better?
The ideal driver loft depends on your swing speed and the attack angle. Average players that swing the club less than 95 MPH will likely find that a 10.5-degree driver performs the best. Better players who can control their drives and want the most distance will lean more towards a 9-degree driver.
Are bigger drivers easier to hit?
Benefits Of Large Driver Heads The larger head drivers can also help to give certain players a bit more confidence in their golf game. They will look at the shot that they are supposed to hit and realize they have a much better chance of hitting it exactly as they should because of the larger head driver in their hand.
Are smaller drivers better?
However, small head drivers have a significant advantage for good ball strikers that find the center of the clubface more often than not. You can swing a small head driver faster and generate more accuracy and distance. Off-center strikes will be less forgiving and exaggerate the mistake.
What size driver head should I use?
Therefore, the USGA is saying that the maximum size of a golf driver head must not exceed roughly ¼ the size of a 2-Liter bottle of soda. So great, a driver head can't be bigger than ¼ the size of a soda bottle.
What are the most forgiving drivers?
Ping G425 Max (Most Forgiving Top Choice) ... Callaway Rogue ST Max (Close Second Most Forgiving Top Choice) ... Cleveland Launcher XL (Best for High Handicappers and Beginner Players & Budget-Friendly) ... Mizuno ST-Z 220 (For Better Players Seeking Some Forgiveness) ... Titleist TSi1 (Best for Seniors / Slower Swing Speed)More items...•
Do any pros use a 10.5 degree driver?
At the WGC-HSBC Champions, Dustin Johnson took the title using a TaylorMade SLDR driver with 10.5 degrees loft. Although TaylorMade has recently been touting the benefits of "lofting up" with its new driver, it's actually been a trend on the PGA Tour for more than a decade.
What is the best driver for a 85 mph swing speed?
The Most Accurate Driver – Callaway Mavrik Max The Mavrik Max tops our list as the most accurate driver for an 85 mph swing speed. Described by Callaway as the easiest Mavrik drive to hit, it includes two interchangeable weights that enable you to set up for a draw or neutral bias.
How far does a 10.5 driver go?
The determining factor is the speed with which you hit the ball. It has been found that 85-90mph is the average speed for beginners and amateurs. If you have a speed of over 90mph, then a 10.5-degree driver can help you achieve a good distance of about 220 yards (201 kms).
What does cc mean in golf clubs?
Club heads are measured, by volume, in cubic centimetres (cc) with a maximum limit of 460cc. Almost all drivers in today's market are between 440 and 460c.
What loft is a 460cc driver?
10.5°Aim and AlignmentClubLoftReplacesHybrid Driver 460cc10.5°Traditional DriverHybrid Driver 230cc10.5°Traditional DriverHybrid Driver 230cc13°Traditional Driver1+ Hybrid Iron14°3 wood13 more rows
What size driver head do I need?
Therefore, the USGA is saying that the maximum size of a golf driver head must not exceed roughly ¼ the size of a 2-Liter bottle of soda. So great, a driver head can't be bigger than ¼ the size of a soda bottle.
What's the biggest driver head?
460ccThe largest driver head approved by the USGA weighs in at 460cc (club heads are measured by volume) and the smaller ones are 440cc or 420cc. The 460cc club heads have larger faces, and the weight is designed to fall into the lower back portion of the club head.
What is a driver in golf?
The driver belongs to the woods category of golf clubs and is classically referred to as the 1-Wood.
Why use a driver on a tee?
Best Used with a Tee. Because the driver is almost exclusively used from the teeing ground a golfer will normally have the benefit of using a tee when hitting this club. Positioning the ball on a tee will allow for the ball to be struck right in the center of the large sweet spot, positioned up higher from the ground than on other types ...
Why do you put the tee lower in golf?
Conversely, a golfer facing a strong headwind may opt to place the tee lower than usual with the objective of keeping the ball low, therefore limiting the negative impact of the wind on the ball.
What is the flex of a driver shaft?
There are five main types of shaft flex: extra stiff (or Pro), stiff (S), regular (R), senior and finally Ladies. Basically, the higher the swing speed the ...
What is a neutral face drive?
By comparison, neutral face drive will see the lines of the clubface parallel to that of the shaft.
How have clubheads been able to increase?
Since the introduction of lighter materials in the manufacturing process , clubmakers have been able to increase the size of the clubhead while crucially keeping the weight at reasonable levels.
Can you move weight around a clubhead?
Another recent customization option now offered by club manufacturers is the ability to move weight around the clubhead.
When did titanium golf drivers become popular?
Driver heads produced from titanium didn’t become popularized until 1995 when the Callaway Great Big Bertha and the TaylorMade Titanium Bubble were introduced. These enormous sized heads were among the first heads to crack the 250cc barrier in volume. It took just 4 more years for Callaway and the rest of golf industry to make drivers that were 300cc.
How many cubic inches are in a clubhead?
The volume of the clubhead must not exceed 460 cubic centimeters (28.06 cubic inches), plus a tolerance of 10 cubic centimeters (0.61 cubic inches).
WHAT IS DRIVER HEAD VOLUME AND HOW IS IT MEASURED?
One of the more remarkable achievements in golf club design is the evolution in the size of the metal driver heads in the short time span they have been in existence. The early metal woods of the 1980s began to catch on because they were easier to hit because of their superior perimeter weighting, less labor-intensive to produce and were more durable than wood. In the late 1980s, the aerospace industry in Southern California was declining rapidly, and these companies, even a little company at the time named Callaway Golf, invested million of dollars in research and development of metal driver heads. By 1988, sales of metal woods surpassed those made of wood.
How is progress measured in golf?
In golf, progress is usually measured by decades, but in the case with driver size and the ability to produce these clubs out of lighter, yet stronger materials, size grew exponentially in only the next few years.
When did the USGA impose a 460cc limit?
So in October 2003, the USGA imposed a 460cc limit on club head size effect January 1, 2004.
When was the first titanium driver made?
A milestone of sorts came in Japan in 1990 as Mizuno created the first titanium driver called the Ti-110. Titanium had been well known for its high strength, yet lighter weight compared to steel. The extremely expensive price tag made this a very limited product to consumers.
What does CC mean in golf?
CC stands for cubic centimeters. You’ll find the term ‘CC’ commonly used among golfers while talking about their golf clubs. This is a measurement that refers to the surface area of the driver’s head.
Why is it important to control a golf driver?
Gaining optimum control of a driver is essential to make full use of its potential. In order to achieve greater control, golfers can use a small gold head on their drive. If the player is unable to control the driver correctly, then there is a high chance of the ball moving out of control.
Why Use Small Head Golf Wedges?
Small heads are not only limited to irons and drivers. In fact you’ll find them also on wedges. So why should you use a golf wedge with a small head? There’s many good reasons I can think of actually.
Why Use Small Golf Irons?
Golf irons can be classified into 3 categories namely, short irons, mid irons, and long irons. 8-irons or 9-irons are classified as short irons.
Why do you need short irons for golf?
This is because the shorter irons offer more control to the player due to the short shaft length.
What is the maximum size of a golf driver?
The USGS is the central authority which fixes the standards that are used for the golf head drivers. 460cc is the maximum permissible size of a golf head. These are generally found in big head drivers. It roughly translates to 28 cubic inches. Everyone often wonders why there is an upper limit being set for these driver sizes.
Why do golf clubs have head drivers?
Golf head drivers are used to provide maximum distance coverage when compared to regular clubs. This is because drivers generally have longer s hafts than normal. The loft angle of the driver is designed to provide a long range of shot.
What is the maximum size of a golf driver head?
The “Liter” is a unit of measurement of volume and is defined as 1,000 cubic centimeters (cc). Therefore, the USGA is saying that the maximum size of a golf driver head must not exceed roughly ¼ the size ...
How many cubic inches are in a golf clubhead?
According to the USGA Rules for 2019, “The volume of the clubhead must not exceed 460 cubic centimetres (28.06 cubic inches), plus a tolerance of 10 cubic centimetres (0.61 cubic inches)” (Page 49). Ok cool, now what does that mean and why should the average golfer care?
Why is a club head only 460cc?
Your hybrids go further than your irons, your fairway woods hit the ball further than the hybrids, and your driver hits the ball the farthest of everything (or it should if you have a decent driver). The larger the club head, the more energy is going into the ball, and the further the ball is traveling. The USGA is simply trying to limit how far drivers can hit the ball. They don’t want people out on the course swinging bowling ball size drivers.
What does the larger the club head mean?
The larger the club head, the more energy is going into the ball, and the further the ball is traveling. The USGA is simply trying to limit how far drivers can hit the ball. They don’t want people out on the course swinging bowling ball size drivers. Authored by Taylor Morton.
Why don't companies make club heads with holes in them?
Now why don’t companies just make club heads with holes in them to let the water flow into the club to decrease the water displacement? That one is pretty simple. The USGA said they can’t do that. The club head must be fully enclosed and divots or cavities with a collective volume greater than 15cc must be filled in with waterproof clay for the measuring process. That means that those old Nike Covert and Vapor drivers had to account for the volume that Nike “cut out” on the sole.
