What is shaft flex in golf shafts?
Shaft flex is the degree to which the shaft will bend or flex during the swing. A more flexible shaft bends easily during the swing and has the potential to produce a longer-ranged shot. Although, choosing the most flexible one will not improve your accuracy as it tends to twist more.
Does more flexible shafts make your golf shots better?
A more flexible shaft bends easily during the swing and has the potential to produce a longer-ranged shot. Although, choosing the most flexible one will not improve your accuracy as it tends to twist more. You have to consider some aspects to improve your swing performance and speed.
Which shaft should I choose for my golf club?
The stiff shaft is quite popular and should be chosen by those who consistently drive the ball 250 or more yards off the tee. This shaft generally appropriate for mid-low handicaps, but be sure to have your clubhead speed measured before choosing between a stiff and regular flex.
Should you buy extra stiff golf shafts?
Extra stiff shafts should generally be reserved for really long hitters (about 300 off the tee) and this flex can be difficult to find, as it is not popular. It is important to note that if you select a shaft that is too stiff, you will lose loft and control on your shots.
How do you Flo a golf club?
8:1315:58How to FLO a Golf Shaft (correct position of shaft alignment) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when I was referring to twing or ping or whatever you want to call it. That's how you do simplyMoreSo when I was referring to twing or ping or whatever you want to call it. That's how you do simply put a little pressure on the shaft.
What does shortening a shaft do?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
What shaft is best for a fast swing?
If you're swinging the driver above 105 mph, it might be time to get some X stiff shafts in your set. Stiff – This range is still considered fast, but you most likely won't be out on Tour anytime soon. If you're between 97 and 104 mph with the driver, you need a stiff flex.
Is 75 gram shaft too heavy?
75 and 85 Gram Shafts And Who They Are For? These are generally for your stronger and better players, as they will be generating a lot of clubhead speed, the weight of the shaft helps to keep the clubhead under control during the swing.
Why do I hit my 3 wood farther than my driver?
Players who hit their 3- or 5-wood as far or longer than their driver are typically using too little loft with the driver for their clubhead speed. You know, it's a funny thing with the driver and its loft compared to the other clubs in the bag.
Will a shorter shaft help my slice?
The long and the short of it Your current length may be perfect for you. You may even need a longer one. But, as our experts and test have shown, a good number of golfers would benefit from a shorter shaft. You may actually increase distance and there's a good chance you'll hit more fairways.
How fast should I be swinging my 7 iron?
An average golfer will swing a seven iron about 75 mph. This number can change based on the weight of the club and if it is steel or graphite. The faster you swing a seven iron, the further it will go. If you can swing at about 85 mph, you will see distances closer to 165 yards.
How do I know what shaft flex is right for me?
Some General Guidelines About Shaft FlexTake a look at the distance you hit your driver. ... If you have a very smooth swing, you might benefit from a softer flex even if you swing fast. ... If your drives go left, you might benefit from a stiffer flex; if your drives go right, you might benefit from a softer flex.
What flex do I need for my irons?
Should You Use Regular or Stiff Flex Shafts?6-iron Carry Distance6-iron Swing SpeedShaft flex (all clubs)< 130 yards60 – 70 mphSenior Flex131 – 155 yards71 – 80 mphRegular Flex156 – 175 yards81 – 90 mphStiff Flex> 176 yards91 + mphX-Stiff FlexApr 13, 2021
What weight shafts do pros use?
It is why the most popular weight for driver shaft-weights on the PGA Tour is still in the mid-60-gram range, with some players having tried shafts less than 50 grams. But more and more, there are exceptions -- players opting for driver shafts decidedly heavier than most of their tour brethren.
Are lighter irons better?
Usually, lighter clubs produce higher spin rates. And with spin rates that are too high, you might actually lose distance. Second, a lighter club is sometimes more difficult to control and can wreak havoc on your ability to make a smooth, rhythmic swing that accelerates through the ball.
What is a good swing weight for irons?
The swing weight of irons probably varies between D2 and D5 for 95% of Tour players. Most will be somewhere in this range. Players with high club head speed like Rory McIlroy or Dustin Johnson tend to be around D5-D6. Players with more average tour club head speed are around D3-D4.
What happens when you shorten a golf shaft?
The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club.
Does shortening a golf shaft make it stiffer?
"Cutting more of the tip will have the effect of getting rid of some of the weaker end of the shaft which, in turn, makes the shaft play and feel more stiff.
Does shortening a shaft change lie angle?
Cutting length from or adding length to a shaft will not alter the angle between the hosel and the sole. What it will affect is the "effective lie".
When should you shorten your irons?
Golfers who are shorter than 5'7” and tend to have a shorter wrist-to-floor length likely need to shorten their irons. The decision to shorten golf irons typically comes down to the height of the player.
What Is Shaft Flex?
Shaft flex is the degree to which the shaft will bend or flex during the swing. A more flexible shaft bends easily during the swing and has the potential to produce a longer-ranged shot.
How Does Shaft Flex Impact Your Golf Game?
The shaft flex of your golf club has an immense effect on the game’s outcome as a whole. From high irons to wedges and drivers, you have to make sure they have the correct flex for trajectory, accuracy, and distance.
How to Choose the Shaft Flex for You?
You can know the correct flex for your shaft by evaluating your swing at a golf equipment store. They’ll check all kinds of things like ball speed, distance, clubhead speed, spin, and many other factors. They also try several shafts in the same driver head to give the most accurate results.
What Shaft Flex Should You Use for The Driver?
It would be best if you choose the stiffest shaft flex for your driver because it is often the club that has the maximum swing speed. Since it carries the maximum swing speed, you may consider choosing the most accurate shaft flex.
How to Determine the Right Flex for Your Iron?
Choosing the right flex for the iron depends on the club you use for hitting a 150-yard shot. If you’re about to take a 150-yard shot, consider using these flex for your irons.
Final Thoughts
When selecting a flex for the shaft in your clubs, the tradeoff is between accuracy and distance. Choosing a senior flex helps you to achieve greater distance due to its flexibility but at the cost of lower accuracy.
Golf Practice Plans with Step by Step Schedules to Follow
Or hop onto our email newsletter and get the free weekly golf tips we send out to our community plus updates and other announcements you don’t want to miss!
scctx5r
Thanks Stuart_G the shaft was purchased through tpc Wakefield plantation which is a very reputable and there had been a few nationwide tour tourneys held there irs super hella nice. Obviously I understand thats meaningless I would imagine the head club builder there knows his stuff.
scctx5r
3 are both axis identified and marked and in correct position for my fitted specs
Adam C
FLO true sounds like the people who you are buying your equipment from were too cheap to buy a PUREing machine and decided instead to slap some buzz words together and sell that snake oil while still charging you PUREing level prices.
mvhoffman
Title pretty much sums it up. Do most "builders" (basement builders like me) do a FLO test?
Golfrnut
I would say that "most" do not. There are tons out there that glue clubs together, not nearly as many that actually focus on any kind of "blueprinting" or really tight specs. I've bought enough "used" equipment in my lifetime to solidify that opinion in my mind.
mvhoffman
Obviously not based on any reliable source but I actually get the impression it's a bit more common with hobbiests than professional builders (but still not even close to being at the level of 'most').
QuickFeet
Title pretty much sums it up. Do most "builders" (basement builders like me) do a FLO test?
Hot Rod 71
All of the Tour Van builds I've seen on YouTube do not include a FLO process. The tech usually pulls a shaft, cuts to length, and then build with the graphics up or down (depending on player preference).
mvhoffman
All of the Tour Van builds I've seen on YouTube do not include a FLO process. The tech usually pulls a shaft, cuts to length, and then build with the graphics up or down (depending on player preference).
pinhigh27
All of the Tour Van builds I've seen on YouTube do not include a FLO process. The tech usually pulls a shaft, cuts to length, and then build with the graphics up or down (depending on player preference).
How does flex affect golf?
The flex in a golf shaft affects the distance, accuracy and trajectory of your golf shot. Because the shaft flexes during a swing, the position of the clubhead changes and it is important to select the proper flex in a club so that the clubface will be square on the ball when it makes contact.
What is stiff shaft?
Stiff Shaft. The stiff shaft is quite popular and should be chosen by those who consistently drive the ball 250 or more yards off the tee. This shaft generally appropriate for mid-low handicaps, but be sure to have your clubhead speed measured before choosing between a stiff and regular flex.
Why is it important to use a more flexible shaft?
The flex in a golf shaft affects the distance, accuracy and trajectory of your golf shot. Because the shaft flexes during a swing, the position of the clubhead changes and it is important to select the proper flex in a club so that the clubface will be square on the ball when it makes contact.
What is the softest flex for golf?
Women generally have the lowest club speed of all golfers and should select a ladies flex. This is the softest of all the flex ratings. If you consistently hit the ball less than 200 yards off the tee , this is an appropriate flex. Women who hit further may want to consider either senior or regular flex clubs.
What happens if your golf shaft is too stiff?
It is important to note that if you select a shaft that is too stiff, you will lose loft and control on your shots.
How many flex ratings are there for golf clubs?
There are five flex ratings for golf clubs--extra stiff (X), stiff (S), regular (R), senior (A) and ladies (L). Generally, the faster your club speed, the stiffer the shaft, but use care when selecting a flex. If you are not certain or in between flexes, it is better to select a softer flex than a stiffer one.
neonlew
I just started playing around with finding the flo in shafts, but need some input from anyone using this method. I am placing a tip weigh which is 200 grams, then a laser device which is 62 grams.
glock35ipsc
FLO = Flat Line Oscillation. So yes, a flat line, not one that oscillates in a circle or an oval. Flat line back and forth, or up and down (however you have the shaft positioned in the clamp).
moparman426
It's explained in the last few seconds in the video that is posted above. He is just doing it with a club head instead of a laser. He marks the top, so 90 degrees from the FLO plane, and installs the shaft with that mark parallel to the club face. As for aligning to the target line, that is usually just for spining.
neonlew
LBlack14, I am simply trying to see what the best answer is for aligning a shaft that has been marked in the FLO position.
moparman426
Once you have found the FLO, do you epoxy the clubhead with the FLO mark aligned at the 12:00 position as moparman426 states in his reply? I am just trying to get my set of irons and other clubs properly fit so I can hit the ball without any clubhead wobbling while coming into impact.
neonlew
Yes, when I find the FLO I place a piece of tape on the top of the shaft and make a straight line with a marker. So based on what you said, then the 12:00 position is the way the shaft should be installed in the club head, not at the 3:00 position.
neonlew
Guys, thanks for you input. I now know exactly how to place the FLOed shafts in my iron heads.