What Is Pureing A Golf Shaft
- Remove Grooves In Shaft. Pureing a golf shaft is necessary to restore its original condition and make it playable again. ...
- Put Pure Grains Into Shaft. Putting pure grains into your golf shaft can make a difference on the course. ...
- Run Heat Through Pureed Shaft. ...
- Install New Golf Club. ...
Full Answer
Does Puring a golf shaft really work?
The system of “PUREing” works to minimize those irregularities and improves shot dispersion. Golf shaft PUREing is a technical process, which is one of several mechanical approaches to improving shaft performance. Hundreds of PGA Tour players have their shafts pured. And, PUREing is done to both graphite and steel shafts.
What does it mean to "pure" a golf shaft?
Pureing a golf shaft is when a golf shaft is taken out of the golf club, analyzed, and then placed back in at a strategic angle. Many golf clubs, when they come from a manufacturer, could have small imperfections in the shaft. This is not usually an issue, but for some players, it can be. More ›. 425 People Used.
Does pureing a shaft improve performance?
When it comes to pureing golf shafts, the two performance attributes that are going to be most affected are distance and accuracy. Proponents of pureing golf shafts suggest that because the golf shaft is installed in the clubhead properly, the player can get the most distance out of their shot.
How to pure a golf shaft?
How to Pure a Golf Shaft
- Clamp the grip end of the club in a vise. The shaft should be parallel to the ground and the club face square with the ground.
- Test the alignment of the spine. Bend the shaft by lifting the free end a few inches and release. ...
- Tape a strip of masking tape around the shaft just above the club head. ...
- Remove the club head and grip from the shaft.
What is PUREing a golf shaft?
Simply put, as Briand explains, puring a shaft helps to identify the inconsistencies of a particular golf shaft as compared to the average or expected design of that shaft. That way, a club builder is armed with certain information to build the club in the most stable and consistent orientation.
Is PUREing a golf shaft worth it?
The Results Our first myth is totally busted – PUREing a shaft led to significant distance increases. On average, our testers gained over 7 yards of total distance with the PUREd six iron compared to the non-PUREd club. That's nearly a full club of extra distance despite the fact that the two clubs had the same loft!
What is club champion Puring?
0:052:04Club Champion - SST Puring - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what happens is is that creates a place where the shaft can't bend when you're swinging the golfMoreAnd what happens is is that creates a place where the shaft can't bend when you're swinging the golf club.
What is SST PURE shaft alignment?
The SST PURE® Shaft Alignment System analyzes the structure of any golf shaft and identifies its most stable bending plane, or Neutral-Axis™. When assembled in the clubhead in this SST PUREd® orientation, the result is improved consistency from club to club within your set and set to set within your brand.
What does Pureing mean?
0:054:52Golf Shaft PUREing - Does It Actually Help? PURE vs Non PUREYouTubeStart of suggested clipEnd of suggested clipAnd that has to do with the shaft alignment or the shaft purine if you've ever heard that before. SoMoreAnd that has to do with the shaft alignment or the shaft purine if you've ever heard that before. So when they pure. It. Like they don't do any special procedure to the shaft they just spin the shaft.
What does spinning a golf shaft mean?
"Spining" (one "n," as in "spine") is a term that applies to golf shafts and describes a process of matching all the shafts within a set of clubs so that their most consistent bending positions all point in the same direction. Spining is a service to golfers offered by some custom club makers and some club fitters.
Do pro golfers pure their shafts?
On every major professional tour, the best golfers in the world rely on the groundbreaking SST PURE Shaft Alignment to make sure their golf clubs perform consistently. Almost $2 billion has been made on the PGA Tour by players who have SST PUREd their shafts for consistency, accuracy and distance.
How do you pure a golf shaft at home?
How to Pure a Golf ShaftClamp the grip end of the club in a vise. ... Test the alignment of the spine. ... Tape a strip of masking tape around the shaft just above the club head. ... Remove the club head and grip from the shaft.Find the dominant spine of the shaft with a spine finder. ... Fit the club head and grip to the shaft.More items...
Does club champion pure shafts?
Club Champion charges $35 to PURE new shafts with sets built from scratch in our build shop. RetroPUREing, or PUREing clubs that were previously assembled, is also an option.
Do golf shafts have to be round?
The rulebook says: "The shaft shall be straight from the top of the grip to a point not more than 5 inches (127 mm) above the sole, measured from the point where the shaft ceases to be straight along the axis of the bent part of the shaft and the neck and/or socket." My elaboration: Shafts have to be straight.More On Golf Shaftshttps://franklygolf.com › more-on-golf-shaftshttps://franklygolf.com › more-on-golf-shaftsSearch for: Do golf shafts have to be round?
Where do you align the spine on a golf shaft?
Golf Shaft Spine Orientation There are two main positions that you can align the spine in, the swing plane and the droop plane.What Is Spine Alignment In A Golf Shaft - Pros And Cons, Is It Even ...https://southamptongolfclub.com › what-is-spine-alignme...https://southamptongolfclub.com › what-is-spine-alignme...Search for: Where do you align the spine on a golf shaft?
What is a pured shaft?
To have a shaft that’s “pured” is just another way of saying that the shaft has gone through an SST Pure analysis to ensure it’s in the most beneficial orientation for consistent performance when attached to a club head.
What does "pure" mean in golf?
We take a look at what it means to “pure” a golf shaft, or to have a set that’s “pured.”. Due to manufacturing tolerances, not all golf shafts are perfectly round or symmetrical. Any small imperfections — whether its wall thickness, roundness or otherwise — can cause variations in how one shaft performs versus another within the same model family.
Can custom fitting golf clubs sweep the tour?
In reality, the particular custom-fitting procedure can sweep the competitive tour across the globe or is now supported for golfing players who need to pay for the ideal device. Besides, it could be debated for the golf’s most strange device issue through some years or other professional golfing players have accepted the cutting edge engineering.
Is SST pureeing a placebo?
The SST pureeing procedure is non-placebo; it is among the most influential cutting-edge engineers, which we have carried out the test. However, the result is a bit doubtful, like other people. Still, the data could mix along with the leading experience shown around Pureeing the clubs, particularly results in boosting up the efficiency.
SST PURE – What is it?
The textbook definition might read something like this – A process by which a specialized machine locates the optimal (most stable) orientation of a shaft.
Pros
SST PURE proponents will cite internal and several third-party studies that show clear evidence of improved accuracy (dispersion) and distance. There’s also plenty of anecdotal evidence from golfers who testify to better performance after switching to PURE’d shafts.
Cons
When golfers buy a dozen balls or a new wedge, they know exactly what they’re getting for a given price. With a service like SST PURE the deliverable isn’t as clear. And that additional bit of mystery leaves plenty of room for criticism.
Left To Ponder
In situations where grey area far exceeds black and white, we’re left with more questions than answers. So, is SST PURE worth an extra $35 or so per club?
How does pureing help in golf?
PUREing not only helped players land their shots nearer the centerline, it also helped them to shrink their dispersion. The average distance between players’ furthest right and furthest left shots was 2.1 yards smaller with the PUREd iron versus the non-PUREd iron.
Is a golf shaft straight?
Start by understanding that, to varying degrees, golf shafts aren’t perfectly straight or perfectly round. These irregularities can cause problems when the shaft twists and bends during the swing. SST PURE Shaft Alignment finds the most stable bending plane or “Neutral-Axis” of the shaft.
