Do I Need Custom Fitted Golf Clubs?
- Getting Fitted. The club-fitting process involves both static and dynamic measurements of your golf swing. ...
- Considerations. Once you have committed to getting custom fitted, consider whether you're feeling good, pressed for time, feeling pressured or swinging poorly.
- Other Fittings. ...
Full Answer
What do you need to know about golf club fitting?
Jan 12, 2015 · Ed Grabowy, who operates the GolfDoctor.com, says the shaft is the most important component of club fitting. Courtesy of GolfDoctor.com You're determined that 2015 is going to be your breakthrough year on the golf course. Joining a club, new woods and irons, lessons and more practice time are all part of the plan. But what about club fitting?
How to fit yourself for a golf club?
Oct 30, 2019 · That means that your club can be independently adjusted to precisely fit your game with the help of a special wrench. You can adjust the lie of your club from a square position to either more open...
What to expect from club fitting?
Sep 19, 2018 · Every True Spec fitting employs advanced technology including either a doppler radar-based radar system or an high-speed camera system, both of which measure a multitude of various ba ll flight and club delivery aspects. The fitting process is similar for a putter: fitters observe a golfer’s putting performance, paying close attention to the face angles and ball roll …
Where to get fitted for golf clubs?
Feb 24, 2021 · A True Spec custom fitting appointment with a professional club fitter analyzes your swing, looking into your unique club delivery tendencies and uses advanced, industry-leading technology to capture data for every golf ball struck in the session. That data is then used to identify the best performing clubhead and shaft that optimize the golfer’s existing swing for …
What does a golf club fitting consist of?
After the interview process, the fitting begins by analyzing the golfer's performance with their current set of clubs. For woods, drivers, and irons, a fitter will observe the player with usage of a launch monitor to quantify specific aspects of ball flight or club delivery for further analysis.Sep 19, 2018
Is it worth getting fitted for golf clubs?
Is it worth getting custom fit golf clubs? The simple answer is yes, it's definitely worth getting custom fit golf clubs. If you were to look at the back of a typical set of off the shelf clubs, they would usually have various markings on them as well as loft and lie angles.
How do I prepare for a golf club fitting?
5:287:03How To Prepare For A Golf Club Fitting - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut if you're getting fit for irons at least bring your seven iron if you're getting fit for aMoreBut if you're getting fit for irons at least bring your seven iron if you're getting fit for a driver bring your current driver. Because it's always good to have a baseline.
How long does fitting golf clubs take?
As a general rule a golf club fitting should take between 45 minutes and 3.5 hours. Full bag fittings take the longest but ittings can also be done in club 'groups' such as 'wood' or 'iron' fittings and these take 1.5 to 2 hours. Individual club fittings take a minimum of 45 minutes and can take 1 to 1.5 hours.
How much does a full bag fitting cost?
If you want to get your entire bag fitted, the average cost will be $275. If you want to get an individual club fitted (driver, wood, irons, wedges, putter), it'll cost you somewhere around $100 each.
Can you get clubs you already own fitted?
This is a great question because it addresses something many people don't think about. And the answer is absolutely yes, it's worth getting fit for clubs you already have. Especially if you're 5-foot-5, since a stock set of clubs isn't likely to have the proper lie angle for you.Oct 4, 2019
How far should you hit a 7 iron?
172 - 215 ydsThe average distance golfers hit each club varies widely. A PGA Tour player hits a 7-iron between 172-215 yards....Average Distances for PGA Tour Players.ClubAverage Distance7 Iron172 - 215 yds8 Iron160 - 200 yds9 Iron148 - 185 ydsPitching Wedge136 - 170 yds7 more rows
What can I expect from an iron fitting?
A good custom fitting for irons starts with an interview of what you want to accomplish with your new set, i.e. distance accuracy or consistency. Then, the fitter should look at your current equipment and ask you specific questions about your distances, miss-hits, trajectory and ball flight.Jan 26, 2019
What to bring to iron fitting?
9 Things To Bring To A Golf Club Fitting Session (The Essentials)Your current set of clubs.Your golf gear.Bring Your 'A' Game.Study your own game and bring your numbers!Do Your Research.Keep A pen Mind.Stick To A Budget Budget.Make sure to bring a fun mindset.More items...
Should you get golf lessons or club fitting first?
If you really want to improve, there's a lot of value in properly fitted equipment before, during and after any swing changes you make from golf lessons. So if you've been wondering whether you need lessons before fitted clubs, it's not necessary. The combination of both is really the best way to shoot lower scores.Sep 14, 2018
What do you wear to a golf fitting?
It's not so much about style as it is about being comfortable while you're hitting. We'll explain it further down, but it's important to wear clothes that don't hinder your swing. Further, it's important to wear clothing that will keep you comfortable over the course of a few hours.Jul 15, 2021
How much does a set of golf clubs cost?
A complete set of golf clubs can cost as much as $1,000. The good news is, your average beginner to intermediate player will still play a good game at a much lower price point, in the $250 to $350 range....How Much Do Golf Clubs Cost? $250 to $350.GenderAverage CostExampleWomen$275→ Click To See Deal1 more row
Why is the shaft important in golf?
The shaft is essential for the consistent performance of the golf club. Many experts would even argue it’s the most important part of the club. In fact, one club-fitter compares the club shaft to the transmission of a car. “The shaft is similar to the transmission of a car.
Who is Ivan Boychuk?
Ivan Boychuk is a freelance writer, golf-enthusiast, and the founder of wired2golf.com. From writing about golf to playing in tournaments to instructing junior golfers, he has been heavily involved in the golf scene for more than 15 years.
Is there a one size fits all golf club?
But as with many things in life, there’s no one-size-fits-all when it comes to golf clubs. Different golfers have different swing styles, swing tempo, posture at address, and preference of ball flight. And that’s where custom club fitting comes in.
Is custom club fitting worth it?
Is custom club fitting worth it? Yes, custom club fitting can increase distance, accuracy, and add consistency to your golf game. It also gives you an added boost of confidence when preparing to hit each shot.
What is Surefit Tour Hosel?
That means that your club can be independently adjusted to precisely fit your game with the help of a special wrench. You can adjust the lie of your club from a square position to either more open or closed.
What is an AP2 iron?
The AP2 irons are, “advanced performance, multi-material irons that offer playability, the traditional solid feel of a forged iron and contemporary yet classic looks for the skilled to highly skilled golfer. AP2 irons are technically advanced blades that provide increased forgiveness without sacrificing shot workability while combining traditional blade length and sole width with a more efficient multi-material weight distribution.”
How to measure for golf clubs?
To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible.#N#Measure your basic height from the top of your head to the bottom of your feet. Stand up as straight as possible to get the measurement. You don't need to be in your swing stance.
What is wikihow wiki?
X. wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. wikiHow marks an article as reader-approved once it receives enough positive feedback.
Driver Heads Are All Unique
One of the biggest mistakes golfers make when purchasing new drivers is assuming they all have similar performance. Based on our experience, we can tell you that there are significant differences in each club. Here are some of the main things we are looking to customize in a driver head for your swing:
Importance of Shafts
Another essential part of your driver fitting is getting the right shaft. Our goal is to get the proper shaft so the player can deliver the sweet spot of the clubhead to the ball with the most consistency. We view shafts and driver heads as equally important. If you want to take a deeper dive into how we fit for shaft, you can read this article.
What is a custom fitting?
A Custom Fitting begins with a short question and answer session between the fitter and the golfer. Becoming more familiar with a golfer’s needs, doubts, and hopes for the game, fitters can determine how to best achieve each customer’s objectives. The interview also brings a personal touch to the fitting, allowing the fitter and golfer to develop rapport.
Why is it important to have a putter in a golf bag?
From drivers to putters, it’s important that each club in the bag enhances a player’s skills while compensating for their tendencies . But often times, off-the-rack irons, drivers, and putters require a golfer to adapt his or her swing to adjust for the clubs. Custom fitting works the other way around, identifying a golfer’s swing characteristics to build a perfect set of personalized clubs which maximizes that players performance.
What is a true spec fitting?
A True Spec custom fitting appointment with a professional club fitter analyzes your swing, looking into your unique club delivery tendencies and uses advanced, industry-leading technology to capture data for every golf ball struck in the session. That data is then used to identify the best performing clubhead and shaft that optimize the golfer’s existing swing for maximum effectiveness. For those who believe they are not “good enough” to be fit, research has shown custom club fitting to have a greater impact on high-handicap golfer’s scores than any other skill level.
Where is True Spec located?
True Spec has locations all over North America and Europe, you are never far from a fitting studio. If you don’t live near any of True Spec’s 17 cities around the world, there’s always the four mobile fit teams that travel to courses in North America and Europe to service golfers.
Can you custom fit a golf club?
Custom golf clubs aren’t only for professional golfers; players of any level looking to improve their golf game should consider getting their equipment custom fit. With the multitude and variety of clubhead and shaft options available, and considering most of these products are targeting the everyday golfer, professional club fitters can “move the needle” related to performance more than they ever have been able to. Custom club fitting is a surefire way to improve performance immediately..
Clubhead Type
Irons range from muscle back blades to ultra-game improvement shovels. 95% of the people I fit fall someplace in between. Things that should be considered when choosing a clubhead are forgiveness, workability, launch angle, spin rate, loft, the center of gravity, and offset.
Shaft Type
Steel vs. graphite isn’t so much the discussion anymore. It’s more about launch conditions, preference in weight, and feel. I fit a player into 110-gram graphite shafts and the very next player into 80-gram steel shafts two days ago.
Lie Angle
Lie angle is one of the most important specs to get right in an iron fitting. If it’s off, you’ll have a much harder time with accuracy and hitting more greens.
Shaft Length
Please don’t show me some chart you found online that gives your height or even your wrist to the floor and expect me to take it as holy writ for how long your clubs should be.
Interview process
Our first step is to discuss a player’s goal and what they are looking to achieve with a new set of irons. We will take their current equipment and test it to establish baseline numbers to compare against.
Choosing The Right Clubhead
The right clubhead is arguably our most important part of the iron fitting. After analyzing our client’s swing, we will try to match a clubhead that gives them an optimal combination of a center of gravity, forgiveness, lie angle, and several other factors.
Shafts
Once we settle on a clubhead, our next goal is to match the right shaft. If the head of the club is the engine of the car, think of the shaft as the transmission. It’s still vitally important to performance.
Set Makeup
Some golfers are under the impression that all iron sets are going to be 3-PW. In most cases, we see sets being built with a different mixture.
Why Is Lie Angle So Important
One of the most critical elements of an iron fitting is getting the right lie angle. As you know, golf is not played on even surfaces. We want to make sure that the club is interacting with the turf optimally – a lot of that has to do with lie angle.
Finding the Right Grip
Our primary goal for the grip is the club resting comfortably in your hands. We might adjust the thickness of the grip based on your hand size, but no rule of thumb fits all.
Testing A Club
In some instances, it might make sense to build a test club for a golfer. They can take it out on the range, or even the course to see how it performs versus their current equipment.
