Getting Fitted The club-fitting process involves both static and dynamic measurements of your golf swing. The goal is to determine what loft, lie angle, shaft flex, head design, length and grips your clubs will need to best suit your game.
How much does it cost to get fitted golf clubs?
Golf Club fitting costs can range depending on which of the options that you choose. The cost for golf club fitting can range from free to upwards of $200 depending on where you choose to go to get your golf clubs fitted.
When, where, and how to get fitted for golf clubs?
use the following guidelines to determine the proper flex for your woods:
- Use ladies flex for woods below 180 yards.
- Senior flex works well for woods between 180- 200 yards.
- Give regular flex a try if your woods fall between 200 to 235 yards
- Use stiff flex for woods between 236-275 yards
- Extra stiff flex works well for woods with over 275 yards
Do I need custom fitted golf clubs?
You should get fitted if you want to play golf. Many golfers think custom-fitted golf club is only for pro golfers . That’s so wrong. Beginners also need a dose of the custom-fitted clubs (more than ever). The benefits of getting fitted for golf clubs cuts across all corners of skill level, including the novice golfers.
How much do custom set of golf clubs cost?
Typically, the basic set for a custom golf club would be the equivalent cost of a premium set available off the rack. For instance, a low range complete golf club set at Hodson Golf Precision Fitting already costs about $2000, while its exotic range is priced at more than $6500.
What is involved in a golf club fitting?
In short, club fitting is the process of determining which golf club allows a player to: Consistently strike a ball closest to the center of the face, with. Clubface that squares to the target line with the sole of the club flush to the ground, that. Optimizes a player's performance, feel and consistency, while.
How much does it cost to get professionally fitted for golf clubs?
On average it costs between $250 and $600 to get a full bag of golf clubs fitted. Driver only fittings typically cost from $50 to $175 as do 'irons' fittings. Wood/Hybrid and wedge custom fittings can be cheaper at $40 to $150 but golf club fitters will often 'refund' fitting costs if you buy clubs afterwards.
How do you get fitted for golf clubs?
Get a basic club consultation from an expert.Make the proper alterations to your current set, or purchase a budget-friendly starter set (anywhere from 1-14 clubs)Research instructors in your area and pick one.Communicate with your instructor about your equipment.Work hard to improve your swing.More items...•
How long does it take to get fitted for golf clubs?
As a general rule a golf club fitting should take between 45 minutes and 3.5 hours. Full bag fittings take the longest but ittings can also be done in club 'groups' such as 'wood' or 'iron' fittings and these take 1.5 to 2 hours. Individual club fittings take a minimum of 45 minutes and can take 1 to 1.5 hours.
Is it worth getting fitted for golf clubs?
Is it worth getting my golf clubs fitted? Yes, it is absolutely worth getting your golf clubs fitted. A professional fitter will assess your swing speed, launch angle and lie angle at impact and then give you clubs that will produce the optimal flight numbers for your customised swing characteristics.
Do you have to buy clubs after a fitting?
Usually, the cost of the fitting is subtracted from the cost of the clubs if you buy them. If you don't like any of the clubs you try, then don't buy anything. You will likely have to pay a moderate fee for the fitting, but the results are yours to keep.
What can I expect from an iron fitting?
A good custom fitting for irons starts with an interview of what you want to accomplish with your new set, i.e. distance accuracy or consistency. Then, the fitter should look at your current equipment and ask you specific questions about your distances, miss-hits, trajectory and ball flight.
How much does a full bag fitting cost?
Full Bag & Full Bag with Putter Fitting In the Full Bag WITH Putter Fitting, the client and fitter work through every club in the bag, including the putter. The cost of a True Spec Full Bag Fitting is $350 and a Full Bag with Putter Fitting is $450.
What is the most important club to get fitted?
The Putter. It is the most used club in the bag and it gets overlooked the most in general golf settings.
What do you wear to a golf fitting?
Your current club or set of clubs. Your typical outfit and shoes – Dress as if you're about to play a few rounds! Your completed pre-fitting survey for the fitting's informational interview.
Is a driver fitting worth it?
A proper driver fitting should lead to a noticeable change in the playability, feel and overall performance of the club. And, to dispel one common misconception, a golf club fitting isn't just for advanced players.
How long does it take to get irons after a fitting?
Q: How long does it take for my clubs to come in after the fitting? A: Typical lead time is approximately two weeks, from the date of the fitting and purchase. Some companies run a little quicker due to their location, custom turnaround time, etc.
How to measure for golf clubs?
To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible.#N#Measure your basic height from the top of your head to the bottom of your feet. Stand up as straight as possible to get the measurement. You don't need to be in your swing stance.
Why do people buy off the rack golf clubs?
In fact, players with a higher handicap have a game that can be much more drastically improved with the use of custom-fit clubs that help to train the swinging motion properly .
What to do if you have a handicap?
If you're not sure of your handicap, a basic description of your skill level can go a long way in helping the fitter match you with the right kinds of clubs that will help improve your game.
Why do you need custom fitting clubs?
Improves Scoring. As touched on above, custom-fitted clubs make it easier to achieve consistent contact, thus improving accuracy. As accuracy and scoring often go hand in hand, club fitting can be a great way to see immediate improvements to your game and drop your handicap.
Why do you need a one year buffer before fitting a golf club?
This is likely because it leads to more consistent strikes with much less effort.
What is brand agnostic fitting?
Many custom club fitting companies offer what is known as brand agnostic fitting, meaning they do not just specialize in one club manufacturer. Instead, they have hundreds of shafts and clubheads from various brands.
What is the most important factor in golf club distance?
And as we know, clubhead speed is one of the most important factors for distance. Also, with fitted golf clubs, you’ll find it much easier to make consistent contact with the “sweet spot” of the club. Quality contact is essential to maximizing your distance.
Why does shaft weight matter?
Shaft Weight. Regardless of your ability or handicap, the weight of the shaft matters because it determines the total weight of the club. One of the main goals behind custom fitting is that you get a golf club in which the total weight matches your swing tempo. This helps with timing and improves consistency.
What is the best thing to do with a brand agnostic fitter?
Going with a brand agnostic fitter instead of your local pro shop or golf store is the best thing to do. Most pro shops or golf stores have some kind of relationship with specific club manufacturers. This usually means they are provided with incentives to sell a certain amount of a particular manufacturer’s inventory.
Why is the shaft important in golf?
The shaft is essential for the consistent performance of the golf club. Many experts would even argue it’s the most important part of the club. In fact, one club-fitter compares the club shaft to the transmission of a car. “The shaft is similar to the transmission of a car.
Why is it important to choose the right golf shaft?
Choosing the proper shaft is a hugely important part of the fitting process. The shaft will greatly influence the feel of your irons, not to mention the launch, spin, landing angle, and distance of your golf shots. Also, there are no standards in ...
What is the lie angle on iron fittings?
Lie angle is one of the most important specs to get right in an iron fitting. If it’s off, you’ll have a much harder time with accuracy and hitting more greens. Historically, lie angle has been measured by reading divot patterns or using sole tape and a lie board to mark strike point being centered, toe, or heel down.
Do upright clubs go left or right?
Upright clubs tend to go more left…. Bending them upright might give a cleaner divot but would make his misses even further to the left. Not a good move as a fitter. Incidentally, when the face is closed, the toe is lower, the lie board was giving him a false impression of his club’s lie angle at impact.
How to set yourself up to play golf?
In conclusion, here are the recommended steps to take in order to set yourself up to to play great golf and enjoy the game for years to come: 1. Get a basic club consultation from an expert. 2. Make the proper alterations to your current set, or purchase a budget-friendly starter set (anywhere from 1-14 clubs) 3.
What happens if a golf club is too short?
If a club is too short, too long, too light, too heavy, the lie angle is completely wrong, the club itself is the wrong design, or any of a number of factors are off , you could be setting yourself up for failure. The game-improvement irons on the left will be much more forgiving and enjoyable for beginners than the blade irons on the right.
What clubs should I use for Sones?
Sones recommends beginning students start with just a few clubs that fit correctly. For example, you can start with just a sand wedge, a pitching wedge, a 7-iron and a driver. This gives you a few proper tools to learn with. Once you get a few clubs or a full set that’s in the right wheelhouse for your skill level, physical size and budget, ...
Why is it important to get fit for beginners?
“It’s very important that beginners get fit because we develop our swings around the gear we use without even realizing it ,” Briand says.
Does Daniel Berger use cavity back irons?
Daniel Berger uses cavity-back irons from 2011! Many amateur golfers of varying skill levels stunt the improvement of their games by believing they’re “ not good enough ” to get a club fitting. They say that once their golf game starts to improve they’ll invest in a professional fitting, but it’s not worth it yet.
Is Briand Sones a golfer?
Even though Briand is a club fitter and Sones is an instructor, both experts agreed that learning the game using poorly fit equipment is a huge hinderance on both improvement and enjoyment. “Some golfers believe they have to get to a certain level to get fit, but that’s a wrong perception,” Sones said. “Using the wrong clubs for you can negatively ...
When is club fitting for Woody Lashen?
Woody Lashen March 25, 2019 Club Fitting. Many golfers are interested to know how exactly an iron fitting works. In this article, we want to share some of the critical things we are looking to accomplish at Pete’s Golf.
What is 3-PW golf?
Set Makeup. Some golfers are under the impression that all iron sets are going to be 3-PW. In most cases, we see sets being built with a different mixture. Our goal is to play to your strengths, and sometimes that means swapping out longer irons with hybrids or fairway woods.
Do cast irons last longer than forged irons?
For example, cast irons will likely last longer than a forged iron. When the faces of iron wear out you will start to lose consistency – some shots might start going too long or short. Typically, we see a golfer’s swing changes or technology improvement will happen before the club wears out.
Can you fit a golfer into an adjustable head?
We won’t fit a golfer into an adjustable head if it’s not necessary. But if we do, we highly recommend not changing the settings on your own. Additionally, if you feel you’re having a problem with your settings, it’s always best to bring it to Pete’s Golf for us to double-check that everything is set correctly.
Is there a standard for shafts?
There are no standards: There are no standards in the golf industry for shaft specs. One company’s “stiff” might be another company’s “regular” flex. By working with reputable shaft manufacturers, and doing our own quality control, we make sure you are getting the right shaft specs based on the fitting.
What is the key to the process of custom fitting?
The key to the process is the launch monitor, where the numbers do not lie. It should also approximately follow a process similar to this: Interview – a custom fitting will typically begin with an interview to firstly determine your individual goal.
How long does it take to fit a golf bag?
A fitting for one club or category of clubs (e.g. driver, fairway woods, wedges) will typically take between 45 minutes to 1 hour while a full bag fitting can take up to 2 1/2 hours so there can be a lot to take in. All that data can be overwhelming to try and make sense of there and then in the session.
Can you get a refund for custom fitting golf clubs?
The good news however is that a lot of golf club fitters will either offer custom fitting for free or offer a refund of any custom fitting fee against any purchase of new equipment. There can often be conditions attached to these refund so it’s important to check up front.
Is it important to get custom fitted golf clubs?
Some argue in fact that it is more important for less-skilled golfers who have less of an ability to make the necessary compensations for poorly fitted clubs . So it is arguable that is more important for the average golfer to get custom fitted clubs.
Can you double the cost of irons?
And you can easily double the cost of your irons if you go for specialist shafts. So if you find yourself starting to go through the options of shafts, club heads, grips etc during your custom fitting just bear in mind that these can potentially add significant costs to the final price of whatever you are buying.
Do custom clubs make sense?
The additional cost for custom clubs does not make sense for everyone so it is worth considering how important improving your game is to you and how much you will use your clubs. Clearly the more you play the more value you will get from them.
Is custom fitting golf clubs important?
So it is arguable that is more important for the average golfer to get custom fitted clubs. One key thing to remember though is custom fitting is definitely not a cure to all your games problems. There is a place for it but the gains some golfers make from it can be far bigger than others.
