Individual clubs in poor condition may be worth as little as $5 each with warped shafts and missing grips. Smooth face clubs are older and should be worth $60 or more per club, even substantially more! In general, less than 5% of all hickory wood shafted clubs have value beyond decorative or playable worth.
Full Answer
How much is a set of golf clubs worth?
An average club in average condition might be worth $30 + -, whereas a rare club set like the Spalding Bobby Jones Hickory-Shafted Golf Clubs, ca. 1933 have an appraised value of $5,000 - $7,000. Wood headed putters. Irons or putters with unusual shaped heads.
Are forged golf clubs any good?
In fact, golf club forging in the early days was even done by manufacturers who sidelined as specialty blacksmiths. Forged golf clubs are often preferred over cast clubs because they provide players a better “feel”— a quality caused by the higher carbon content forged iron or steel has.
How do you value wood shaft golf clubs?
If your looking for a value on your wood shaft golf clubs, the first thing you need to do is to make sure that the shaft is in fact made of real wood. Many club manufactures have produced clubs that have metal shafts with a wood grain finish.
Are golf clubs made by casting or forging?
About 90% of golf clubs sold in the market nowadays were made by casting. Although casting became the most commonly used method in making golf irons (a distinction which it holds to this day), forging continued to be used to some extent in manufacture to cater to the preferences of more discerning players.
How do I know if my golf clubs are worth money?
The major determining factor in the price of a wooden antique golf club is scarcity. Hickory shaft clubs are very rare, even though thousands of them were made at the time. The rarer the club, the more value it carries. The more the value, the higher the price.
Is there any value in old golf clubs?
According to GolfWeek, the most valuable antique golf clubs can sell for as much as $80,000 at auction. However, it's not at all common to see this type of value. Most individual clubs sell for between $15 and $100 at auction or in resale shops.
How much should I sell my old golf clubs for?
Resale and Trade-in Prices for 2014/2015 Golf Clubs (retrieved 05/24/2022)Golf ClubGolf Club Trade-In Stores (PGA Value Guide)Online Marketplaces (eBay, after fees)TaylorMade Tour Preferred MC Iron Set (3-PW)$96$254Titleist 915D3 Driver$67$129Titleist MB 714 Steel Iron Set (4-PW)$138$291Ping i25 Driver$49$13010 more rows
What are the most valuable vintage golf clubs?
The Most Expensive Golf Clubs Ever Sold at AuctionAndrew Dickson Putter -$181,000.Simon-Cossar Fruitwood Metal Headed Blade Putter -$165,000. ... Square Toe Lined Iron Golf Club – $151,000. ... Golden Putter First Lady Special Edition – $150,000. ... Long Nosed Scarped Golf Club – $91,000. ...
What kind of golf clubs are worth money?
Here's a look at 11 classic golf clubs or sets of clubs from the past and what they're worth today.Cleveland VAS 792 Irons.TaylorMade Burner Bubble driver. ... Titleist 975D driver. ... Callaway Steelhead fairway woods. ... Callaway Big Bertha War Bird driver. ... Ben Hogan Apex PC Forged Blade irons. ... Tommy Armour Silver Scot 845 irons. ... More items...•
How can you tell how old a golf club is?
The Wooden Shaft Test – Whether or not the shaft is made of wood is a primary indicator of age. The Markings or Stamps – If there is a marking or shop stamp, an Antique Golf Club Reference Guide could be used to date the club fairly precisely.
What percentage does eBay take for golf clubs?
For the most accurate estimate, there are eBay fee calculators online. In general, sellers can expect to pocket around 87 percent of the sale price minus shipping.
What should I do with old golf clubs?
What to do With Old Golf Clubs? (7+ Old Golf Club Ideas)Sell old golf clubs to a golf-specific retailer like Golf Galaxy or 2nd Swing Golf.Sell them to a sports-specific retailer like Play it Again Sports.Donate old golf clubs to organizations, golf courses, or instructional facilities.More items...•
Can you make money buying and selling golf clubs?
9:0514:30HOW MUCH HAVE I MADE BUYING AND SELLING GOLF CLUBS!?YouTubeStart of suggested clipEnd of suggested clipCareer slash obsession by buying and selling clubs and even making money doing it now it does takeMoreCareer slash obsession by buying and selling clubs and even making money doing it now it does take time like anything in life like if it was easy everyone would do it.
What Golf Club is a niblick?
Pitching Niblick – this is the old way to refer to a golf club which achieved the same function as the modern 8-iron, or short iron. 17. Niblick – the old name for a sort of golf club which corresponds to the 9-irons golfers around the world use nowadays.
When did they stop making wood golf clubs?
In the mid-20th century, both the USGA and the R&A ruled that golf clubs with steel shafts could be used in tournaments. While steel was used for club shafts, wooden heads were the norm for drivers and fairway woods until the 1970s.
What are old golf clubs called?
They were:Driving iron: 1 Iron.Mid-iron: 2 Iron.Mid-mashie: 3 Iron.Mashie iron: 4 Iron.Mashie: 5 Iron.Spade mashie: 6 Iron.Mashie-niblick: 7 Iron.Pitching niblick: 8 Iron.More items...
Factors affecting golf club worth
Some factors are depicted below to fix the real value of the golf club.
What are my golf clubs worth?
Generally, a set of golf clubs require a maximum of around $1200. Within this price range, you can get most of the varieties of golf clubs. Here is the straight elaboration of your question “what are my golf clubs worth?”.
What are my old golf clubs worth?
Old golf club’s pricing is dependent on the brand value and the availability of the unit. Normally, common vintage golf clubs are worth a maximum of $20. If you have older models of golf clubs, you’ll get more money.
Conclusion
The used golf clubs, the old golf clubs, or the recently purchased golf clubs- all have an impressive value. Different players go for different types of golf clubs depending on their playing style.
What is a wood putter?
Wood headed putters. Irons or putters with unusual shaped heads. Irons with no face markings, or unusual face markings. Woods that have a thick curved oval neck, covered with 4 or 5 inches of string whipping.
Where to look for shafts on golf clubs?
Shafts: Look at the top of the club hosels (the part where the club head and shaft come together). Check the "pin" that holds the shaft in place, doest it look rough like it was worked on, or is it not smoothly aligned with the hosel.
What to look for in the condition of hickory golf clubs?
What to look for in the condition of your hickory golf clubs for value and pricing purposes: Clubs that show lots of use, rust, pitting, have a warped or cracked shaft or hosel, bad or missing grips, are not of 'high quality" or that have been cleaned, restored or refinished are the "least desired" and bring lower prices.
What is the best look for top dollar?
For top dollar, collectors prefer the look of natural patina and original, or slightly used condition to pay in the higher price ranges. Original is best, original shaft, original grip, original condition...
What are the factors that indicate your clubs are common and at the low end of the value chart?
Factors that indicate your clubs are common and at the low end of the value chart include: Stainless steel, chromed, or chromium heads. Clubs with dots, hyphens, lines or other face markings. Metal caps at the end of the grip. Yardage ranges stamped on the back (70-100) (100-125) (140-150) yards.
Is a hickory shaft golf club rare?
Hickory shaft clubs are not really that rare. Millions of hickory shaft clubs were made so there are still oodles of hickory shaft clubs still around. The basic rule on antique wooden shaft golf club value is in general, the older the rarer, the rarer the more value... Now that being said, obviously there are some variables to that rule.
What were golf clubs made of before the turn of the 20th century?
Before that time, shafts were made of hickory, all iron heads were forged steel and woods were hand-carved from a single piece of persimmon. Clubs from before the turn of the 20th century can be worth quite a bit, presuming they were made by a prominent club maker and are in good condition.
How long has golf been around?
Some historians say the game of golf has been around for more than 500 years. Clubs and other equipment can be dated back to different eras throughout that time. To find clubs with significant value, you need to look back, definitely before World War II and probably before 1930, the year steel shafts and matched sets became common in golf club manufacturing. Before that time, shafts were made of hickory, all iron heads were forged steel and woods were hand-carved from a single piece of persimmon.
How much is a 1860s driver worth?
A driver from the 1860s hand-carved by Old Tom Morris or Laurie Auchterlonie in St. Andrews, for instance, could be worth a few hundred dollars or up to $20,000 depending on the model, condition and authenticity.
How much did a rake iron sell for in 1989?
One such iron, a rake iron designed to hit balls out of mud and water, was estimated to go for less than $300 at auction. It sold in 1989 for almost $80,000. Prices like these, while unusual, do happen now and again. Values in the vintage club market fluctuate wildly based on many factors.
Is collecting golf clubs a hobby?
Collecting antique clubs can be a fun and educational hobby. Having a collection of classic or antique golf clubs is not an unusual hobby. Developing a valuable collection, on the other hand, is a very different commitment. Like wine or antiques, classic and vintage golf clubs can appreciate in value over time.
Is it a hobby to collect golf clubs?
Having a collection of classic or antique golf clubs is not an unusual hobby. Developing a valuable collection, on the other hand, is a very different commitment. Like wine or antiques, classic and vintage golf clubs can appreciate in value over time. Not every club appreciates or appreciates in the same way, however.
2nd Swing Value Guide
2nd Swing Value Guide is the industry's newest & easiest way to find golf club values online, providing golfers with the unique ability to trade in their old clubs and receive credit on 2ndSwing.com or to sell them outright. Follow the simple steps below to see what your clubs are worth & choose which payment option best suits your needs.
Highest pricing when you trade or sell. Guaranteed
We are currently making changes to our website to improve the customer experience. As part of these changes, we will temporarily be requiring a call to our Service team in order to use 2ndSwing.com Credit. This is only temporarily and we will soon be issuing e-Gift cards as a trade payment option again.
How to Redeem Your 2ndSwing.com Credit
Complete trade-in process and select 2ndSwing.com Credit as your preferred payment method.
WHY TRADE WITH 2ND SWING?
Highest Values • More Makes & Models Qualify • No Limit on Trade-ins • Fast Payment
FREQUENTLY ASKED QUESTIONS
It’s simple, follow the trade-in steps and once your clubs arrive you can expect payment within 7-10 business days. When completing the trade-in process you have an option to receive your funds via check, PayPal or receive a 2ndSwing.com Credit. Simply chose the payment option that works best for you.
How is a forged golf club made?
Simply put, the process of making a forged golf club basically involves the molding and beating of a soft piece of steel into place by heat exposure. The high temperature to which the metal is exposed makes the metal easier to handle and a lot more malleable.
How hot is a forged iron club?
To produce the forged club’s head, the cylinder is first heated to a temperature of about 1200°C (about 1575.15°F). This process preserves the iron’s chemical integrity or its resistance to releasing toxins.
What are the advantages of forged irons?
Forged irons have always been regarded as more advanced clubs due to their less forgiving nature; these clubs have a smaller sweet spot that ultimately requires better aim and a steadier swing.
What is the most commonly used method for making golf irons?
Although casting became the most commonly used method in making golf irons (a distinction which it holds to this day), forging continued to be used to some extent in manufacture to cater to the preferences of more discerning players. However, the earlier part of this century saw a noticeable resurgence in the production of forged iron clubs, ...
What is the process of making iron golf clubs?
In earlier years, the main method that was used in making iron golf clubs was the forging of metals. However, later technologies, particularly those that were introduced in the 1960s, resulted in the adoption of casting—a process which involves pouring molten metal into a mold to produce a golf club head—as a manufacturing method.
What does it mean to feel a golf club?
Players often refer to the “feel” as the ability to tell when they strike a ball off-center. Forged golf clubs usually prove appealing to professionals and capable amateurs who value their superior feel and ability to shape shots.
What does lack of voids mean in golf?
However, the lack of voids means players will get consistently solid shots. The same cannot be said for a cast club as even tiny voids in the metal can adversely affect the club’s feel in the player’s hand.
What is the reward of a putter fitting?
The reward of a putter fitting is more of a slow burn, and the result will incrementally save you fractions of a shot several times per round until your scores subtly creep lower while your confidence on the green mounts.
What is a putter fit?
What Exactly is a Putter Fitting? When you get fit for a putter from a professional fitter, you can expect to identify the optimal length, loft, offset, weight, shape, balance, alignment aid, and even face material for your specific putting stroke.
What does a fitter do?
From there, the fitter can begin to diagnose faults and identify elements in a putter that can address those faults. For example, if a right-handed golfer tends to miss putts to the left, a fitter and their technology may identify a slightly open face through impact.
Is it a no-brainer to get a free putter fitting?
Taking advantage of a free putter fitting while making your next putter purchase is a no-brainer if you want to get your money’s worth from your purchase and find the optimal putter for your game.
