What does PTR mean on clubhouse?
What does PTR mean on Clubhouse? PTR is short for ‘Pull To Refresh’ and sometimes it might also be the term for ‘Pull To Reveal’. You will hear this term from the stage whenever the speaker or moderator wants you to literally pull your screen down to refresh it.
What does ‘PTR’ mean in a debate?
PTR is short for ‘Pull To Refresh’ and sometimes it might also be the term for ‘Pull To Reveal’. You will hear this term from the stage whenever the speaker or moderator wants you to literally pull your screen down to refresh it. It can be considered as both a gesture and a call to action at the same time.
Can a player replace a damaged Golf Club?
A player is not allowed to replace a damaged club, except when it is damaged during the round by an outside influence or natural forces, or by someone other than the player or his or her caddie. This Rule change greatly simplifies the complex Rules on damaged clubs.
Who can call for a PTR?
The speaker or moderator can call for a PTR for either purpose. You can also PTR without any prompt from anyone just to check your position. Knowing your position in the queue is helpful if you want to be called on stage to ask a question or give your input on the subject being discussed.
What is a good PTI score?
A player's PTI is a number generally ranging from 0 to 80. Similar to a golf handicap, better players have a lower PTI. An 80 represents a brand new player who likely has limited experience playing other racquet sports. A 0 represents a highly skilled player who can compete at the very top national level.
What is PTI in golf?
Another important piece of swing data is 'smash factor' or PTI (power transfer index), which is the ratio between ball speed and club head speed. With a driver, players are trying to reach a maximum smash factor of 1.5. This means that if a player's swing speed is 100 mph, ball speed will be 150 mph.
What is a good smash factor for a PW?
1.25Smash Factor is ball speed divided by club speed That means for a 100 mph club speed the ball speed would be 150 mph. The higher the loft of the club, the lower the smash factor is expected to be. A PW should have a smash factor near 1.25.
What is the best smash factor in golf?
1.5Generally, 1.5 is an ideal smash factor, but the average golfer's smash factor is only about 1.42, TrackMan says. If an average golfer could achieve a smash factor of 1.5 (by solid, center hits), that would increase ball speed by 8 miles per hour and reduce spin by about 30 percent.
What is a good smash factor for 7 iron?
Launch monitors give values that typically range from 1.3 to 1.4 with a 7-iron, and 1.44 to 1.52 for drivers, depending on the model, head weight and launch monitor in use.
Is 1.3 smash factor good?
A smash factor of 1.3 would be considered good for an amateur's 6-iron, but not so good with driver. According to TrackMan, the average golfer who plays off a 14.5 handicap achieves a smash factor of 1.44 with their driver, so anything less than this could be considered below average.
Can smash factor be too high?
It is quite possible to have a smash factor with irons that is too high. Golfers who play from a closed face position and who tend to flight the ball low will often have a higher smash factor than golfers who flight the ball appropriately.
What is considered a slow swing speed in golf?
Anything lower than 90 miles per hour is considered a slow swing speed. When you have a slow swing speed it basically means the ball will only travel a few yards. This of course makes it more difficult for you to move closer to the hole.
What is the average driver swing speed?
Research conduction by Trackman a few years ago showed that the average driver swing speed for average male golfers was 93.4 mph. Approximately 45 percent of golfers tested averaged between 91-100 mph swing speeds. If you fall within this category, it is safe to say you are around average.
What is a good smash factor for an 8 iron?
A good smash factor for an 8 iron would be anywhere between 1.35 to 1.5. It the method in which the power is transmitted to the ball during impact. It is not merely about the power and speed of the club. The smash factor is calculated as the ratio of clubhead speed to ball speed.
What is the average club head speed for a 7 iron?
According to TrackMan statistics, the average 7-iron clubhead speed on the PGA Tour is 90 mph. The average male recreational golfer, on the other hand, swings the same club at closer to 75 mph, which is why he hits his 7-iron about 140 yards, compared with 170 to 180 yards for the Tour guys.
How can I get my 120 mph swing speed?
0:031:52Clubhead Speed Training 120 mph | Greg's TrackMan ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition really feel this usually after the first isometric session if you haven't done one in aMorePosition really feel this usually after the first isometric session if you haven't done one in a while you really feel tight on your muscles.
How do you determine your honors in golf?
The honor on the first tee is determined by the tournament's draw, pursuant to Rule 10-1a for match play, or 10-2a for stroke play. If there is no draw, the honor is determined by lot. If there are two players, for example, they may flip a coin to decide who tees off first.
Who hits first after tee off?
Rule 10-1b states that once everyone has teed off, the golfer farther from the hole plays first, regardless of position. There is no penalty in match play for playing out of turn, but your opponent can make you cancel and replay your shot.
Who hits first on tee box?
10-1. In match play, golfers play in this order: On the tee – On the first hole, the player listed first on the scorecard (as determined by the committee) tees off first; otherwise, the order is decided by lot or other fair means (e.g., a coin flip).
How do you decide who to tee off first?
Traditionally, the golfer with the lowest handicap is chosen to tee off first. But for most games, golfers tee off randomly, requiring some sort of draw. An easy way to achieve such a draw is to throw a tee. All players stand in a circle and one tosses a tee into the center.
Feedback
In a fitting (6 iron) a couple of years ago in addition to all the usual measurements, launch angle, spin rate, club speed, ball speed, carry distance, total distance, etc there was a category called PTR. I have forgotten exactly what this measures and what should be good numbers. Can someone refresh my memory? Thanks.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Sony Open Pics from January 11, 2022 Part 1
I was able to get out to the Sony Open today to take a few pics. I guess due to Covid precautions they kept the spectators pretty far from the players. Also due to camera...
Titleist Vokey SM9 Link on Wedge Works Coming Soon- UPDATED Pics Added Pg 4
Looks like there is a link on Titleist Wedge Works for the new Vokey SM9, but doesn't show any photos yet.
Cobra 2022 Plans
Anyone have info on Cobra's plans for the upcoming release season? I know the blades are new and assume the King Tours are sticking around for another year (or...
What does PTR mean in a video?
PTR is short for ‘Pull To Refresh’ and sometimes it might also be the term for ‘Pull To Reveal’. You will hear this term from the stage whenever the speaker or moderator wants you to literally pull your screen down to refresh it. It can be considered as both a gesture and a call to action at the same time.
Can a speaker call for a PTR?
The speaker or moderator can call for a PTR for either purpose. You can also PT R without any prompt from anyone just to check your position. Knowing your position in the queue is helpful if you want to be called on stage to ask a question or give your input on the subject being discussed. 79 views.
What does PTR mean on Clubhouse?
PTR is short for ‘Pull To Refresh’ and sometimes it might also be the term for ‘Pull To Reveal’. You will hear this term from the stage whenever the speaker or moderator wants you to literally pull your screen down to refresh it. It can be considered as both a gesture and a call to action at the same time.
Can a speaker call for a PTR?
The speaker or moderator can call for a PTR for either purpose. You can also PTR without any prompt from anyone just to check your position. Knowing your position in the queue is helpful if you want to be called on stage to ask a question or give your input on the subject being discussed.
What are the components of a golf club?
Club performance involves three distinct components of modern day golf clubs; grip, shaft and club head. These components individually and collectively contribute to the overall performance of shot making resulting in ideal ball flight.
What is the law of golf?
Law refers to the physical forces, which are absolutes in influencing the flight of the ball. There are no absolutes in the golf swing, only Principles. Absolutes are reserved for ball flight, that’s why they are called Laws.
What are the 10 static club numbers?
First, sets of clubs need to be consistent in progression of their performance numbers, e.g., lie angles. Second, the performance numbers must fit the golfer to achieve maximum game improvement, e.g., grip size, club length and swing weight.
What was the PGA of America?
The PGA Of America - In the forming years of The PGA of America, golf professionals were divided into two groups, playing & working professionals. The club professionals that did not spend the winter months playing the tour took exception to paying dues so others could “play” all the time. At the 1930 annual PGAmeeting, it was suggested by George Sargent to change the PGA name to ‘Golf Instructors and Players’ Association of America’. Sargent went on to state, ”There are two distinct kinds of men in our organization: the instructor class who develop the players who make the game and business and which is the major class of our membership: then there is the group of high-class players who are the advertising fellows. They get the most publicity. The instructors should have more recognition”. This cemented the cornerstone that the primary role of the golf professional was as an instructor.
Does golf club performance affect ball flight?
Today’s technology of club fitting and launch monitor data clearly suggests that golf club performance contributes to ball flight. Technology has proven that swing mechanics are only half of the equation to consistent ball flight.
Is golf a learned skill?
There have been many theories on how to swing a golf club through out the history of the game. These theories have been supported by countless instructional books, magazine articles, videos and many instructor s have their own idea of the in famous Hogan Secret . But through it all everyone recognizes that golf is a learned skill. As long as the game of golf prevails there will be a need for instruction.
How to finish ferrules?
Ferrules can also be finished using narrow strips of 180 grit cloth back sandpaper, followed by wipe finishing the ferrule with a paper towel wetted with acetone. Wishon describes this simple process:
What is the best tool to rough up shaft tips?
For prepping the tips of shafts, Wishon recommended a small belt sander, which he said is best for roughing up all shaft tips.
How to rough up graphite shafts?
But he said that beginning club builders should rough up the tips of graphite shafts by hand using strips of 100 grit cloth back sand paper. This is better for beginning club makers to do until he or she learns the “touch” required to abrade a graphite shaft tip using the belt sander. To prevent sanding too much off a graphite shaft tip with a belt sander, the use of a TRizac belt is often better better. However, with practice the club maker can use the 100 grit sanding belt to rough up the tip of graphite shafts.
What is the shear strength of overnight cure?
OVERNIGHT CURE Two-part shafting epoxy with a lap shear strength of at least 3,000 psi.
Can you rough up a steel shaft?
Not roughing up the tip of STEEL shafts enough , and then having the head come off the shaft in play. “Steel shafts are tough as nails. The chrome plating on them is very tough and wants to resist sanding. So you can be rough with your tip sanding on steel shafts and never worry about damaging the shafts.”
Can you make final adjustments before it sets too firmly?
If you’re quick enough, you’ll still be able to make final adjustments at this stage before it sets too firmly.
Can you be aggressive with steel shafts?
With steel shafts you can be relatively ‘aggressive’ with the knife, always making sure to work the blade away from you not towards you. (You may find it easiest to do this with the club secured in the vice.)
Is regrip golf club valuable?
As a golfer, learning how to regrip golf clubs is really valuable. While you might not think it, something worn out or on its last legs can cost you precious shots, especially in damp and wet conditions.
Is it easier to change your grip on a golf ball?
But changing a golf grip is easier than many golfers imagine.
Can you use double sided tape on reels?
You can also get double-sided tape in sheet form rather than on a reel. Leave a little extra at the top and don’t unpeel the other side of the double-sided tape until you are ready to fit the new grip. Wrap the extra bit around the top so it is covered with tape as this will make it easer to slip the new grip on.
What is a major change in golf?
Major Change: Use of Clubs Damaged During Round Golf's New Rules. Major Change: Use of Clubs Damaged During Round. A player is allowed to keep using and/or to repair any club damaged during the round, no matter what the damage and even if the player damaged it in anger.
Can you keep a golf club in the round?
A player is allowed to keep using and/or to repair any club damaged during the round, no matter what the damage and even if the player damaged it in anger.
