what is spine alignment in a golf shaft

by Miss Edwina Roberts MD Published 3 years ago Updated 2 years ago

What is Spine Alignment? A spine can be visualized as a longitudinal line or plane on a golf shaft that is more resistant to bending than any other line or plane. By locating the spine it can be placed in a predetermined position.

A golf shaft is said to have a 'spine' if it is inconsistent in its stiffness when bending in different directions. Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining.Feb 6, 2020

Full Answer

Is Spining still important in the golf industry?

Golf Shaft Spine Orientation. There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation. The swing plane means that the spine is perpendicular to the clubface and the droop plane is parallel with …

Should I spine align my golf shafts?

A Spine should be visualized as a backbone or ridge in the golf shaft, running down its length, more resistant to bending than any other part of the shaft. When a golf club is swung it is forced to bend; this flexed shaft will then naturally want to straighten and return towards it’s spine and should the spine is misaligned to the club face it will leave the club face slightly open or closed …

Do shafts need to be tested for spine location?

Hireko Golf’s technical director Jeff Summitt will demonstrate how to find the spine of a golf shaft. A spine is an inconsistency created during the manufacturing process where the steel or graphite shaft may not be perfectly round, straight or where the wall thickness is not uniform around the circumference of the shaft. Once the spine is detected, there is a proper orientation …

What is the best orientation for the spine in golf?

A golf shaft is said to have a 'spine' if it is inconsistent in its stiffness when bending in different directions. Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining.'

Is spine alignment necessary?

Having proper alignment goes beyond maintaining a good posture — it can also help prevent long-term pain. Misalignment may impair your range of motion, and severe issues can affect your quality of life. There may be signs that your spine is misaligned, along with pain around several joints in the body.Oct 14, 2019

Does golf shaft spine alignment work?

The shaft oscillates and if it doesn't do this consistently it can lead to misses. It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion. This process can also help improve the feel of your clubs during the swing.

What does spinning a golf shaft mean?

Shaft spinning is the process of locating the optimal and most consistent bending position of the shaft.

Do driver shafts have a spine?

all shafts have a spine and when you custom fit a driver shaft you ensure spine alignement towards the face of the shaft. when you start to ajust the shaft position, then you move the spine position facing a different direction.May 30, 2012

How important is arrow spine alignment?

Having the shafts spine aligned isn't really more critical from one venue to another if you're looking for as much accuracy as you can squeeze out of your equipment. For a hunting arrow it helps a lot because fixed blade broadheads will typically perform better when the arrows are as consistent as possible.May 9, 2017

What do you do if your spine is out of alignment?

The most effective treatment typically is a spinal adjustment from a trusted chiropractor who will use their hands to readjust the bones in your spine and neck, helping to put misaligned vertebrae back into alignment.Apr 21, 2020

Do you need to spine a golf shaft?

The answer to this question is easy: No. The spining of golf shafts is not something that any recreational golfer needs to be concerned about, nor is it a service on which any recreational golfer needs to spend money today.Feb 6, 2020

How do you install spine alignment in golf shafts?

Part of a video titled How to Find the Spine of a Golf Shaft - YouTube

1:41

3:31

Then you want to mark at the top of the shaft for each time that. It. You feel it click into place.MoreThen you want to mark at the top of the shaft for each time that. It. You feel it click into place. And you'll see each time I do this. It's going to pop into the same. Place.

Will a stiffer shaft reduce spin?

So the stiffer the shaft and/or more tip stiff the shaft in relation to your clubhead speed and point of release, the less the shaft bends forward at impact and the more that shaft becomes a lower launch and lower spin shaft.Jan 11, 2013

How do you fix a bent golf shaft?

Take your golf towel and rub the shaft vigorously up and down. The friction will heat up the shaft to a point where you can straighten a slight bend. (Yes, it actually works.)

What is frequency matching in a golf shaft?

Frequency matching shafts only measures the butt flex of the shaft and allows the club maker to perfectly match a set of golf clubs. It is up to the club fitter to match a shaft to the golfers swing needs.May 4, 2019

How do you straighten a hickory golf shaft?

Part of a video titled How to Straighten the Shaft of a Hickory Golf Club - YouTube

1:13

4:31

And clamp it down then we can we're going to heat it with a heat gun up to 250 degrees.MoreAnd clamp it down then we can we're going to heat it with a heat gun up to 250 degrees.

What Is Spining?

We turned to golf equipment guru and custom clubmaker Tom Wishon, founder of Tom Wishon Golf Technology, for a more in-depth explanation of spining.

The Importance of Spining in Today's Golf Shafts

Spining was once a pretty important service provided by custom club fitters to highly skilled golfers and to other golfers who love diving deep into the technical side of golf equipment. But with the improved golf shaft manufacturing standards of today, is spining still important?

Do Recreational Golfers Need to Think About Spining?

The answer to this question is easy: No. The spining of golf shafts is not something that any recreational golfer needs to be concerned about, nor is it a service on which any recreational golfer needs to spend money today.

What is Spine Aligning?

First, every golf shaft has a “spine”, and that spine is stiffer than the rest of the circumference of the shaft. (Nobody should argue that the spine is not the stiffest part of the shaft, but proof can be seen when rotating a shaft on a frequency machine. You get a stiffer reading when the spine is oriented the direction the shaft is deflected.)

Are there any negatives to Spine Aligning?

1. It is a fairly time consuming process, so it costs some money. (It’s not very expensive if you’re starting with a new set of custom clubs, But if you want to spine align an existing set of clubs, it can get quite costly.)

marrigo

If you use the search function at the top of the page you'll find enough material to keep you busy and utterly confused for several days. If you'd rather not go that route then here's a summary of what you'd find: essentially spine aligning, floing, puring are different ways of orienting the shaft to so the it bends along a neutral plane.

RogerinNewZealand

I have all my irons/wedges spine aligned, have checked the spine on my R9 Driver,#N#and just assembled an Adams A3 25 degree hybrid with a steel 5 iron shaft.#N#If i miss a shot, i know it is MY fault, not the Equipment.#N#Hows that for a simple reason to spine align.#N#I don't argue any more on the subject, but Thanks GOLF WRX for Teaching Me.

shotmaker72

LOBUB, what's so bad about being a 2-capper and not knowing what spine aligning is? I find clubs I like and that work....then I stick with them!! I learned to play golf in the good ol' USMC and with our beloved country being at war for 10 plus years, it doesn't give me much time to catch up on golf equipment talk and tech.

3step

Here's some credible evidence for you.#N#1) If Tom Wishon says that he was in on the testing of shafts and the result of that testing showed both asymmetry and benefits from re-orientation, I have to believe that his statment of improved performance and flight is credible.#N#2) There are many tour professionals, including Padraig Harrington, Colin Montgomerie, Tommy Armour III, Gary Nicklaus, and several dozen more, who have gone on record that they see the benefit of the SST Company.

TomWishon

I don't doubt a word of what you wrote, tempered by the fact that "feel" is non-quantifiable and what a PGA Touring professional can perceive, is probably far in excess of what the average golfer can appreciate.

joey3108

Anything that doesn't make it worst id always a good thing to try or add IMO.

shaolingolfer

When I purchased my new set of iron last year, I spent couple days researched this subject on internet and I decided that there's enough evidence out there to invest in shaft puring on my new set of iron. Love my new iron and no regret.

Golf-FAQ.com