what is spine alignment on a golf club

What is Spine Alignment? A spine can be visualized as a longitudinal line or plane on a golf shaft that is more resistant to bending than any other line or plane. By locating the spine it can be placed in a predetermined position.

Full Answer

Should I spine align my golf shafts?

When a golf club is swung it is forced to bend; this flexed shaft will then naturally want to straighten and return towards it’s spine and should the spine is misaligned to the club face it will leave the club face slightly open or closed on impact.

What is spine alignment?

You get a stiffer reading when the spine is oriented the direction the shaft is deflected.) The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o’clock or 9 o’clock position – also called the neutral position.)

What is Spining in golf?

Hireko Golf’s technical director Jeff Summitt will demonstrate how to find the spine of a golf shaft. A spine is an inconsistency created during the manufacturing process where the steel or graphite shaft may not be perfectly round, straight or where the wall thickness is not uniform around the circumference of the shaft. Once the spine is detected, there is a proper orientation …

What is the best orientation for the spine in golf?

Mar 05, 2011 · What is Spine Alignment? A spine can be visualized as a longitudinal line or plane on a golf shaft that is more resistant to bending than any other line or plane. By locating the spine it can be placed in a predetermined position. Every clubmaker has their own preferred positioning, we use 9 o'clock. The goal is to facilitate repeatability via a stable plane.

Is spine alignment necessary?

Having proper alignment goes beyond maintaining a good posture — it can also help prevent long-term pain. Misalignment may impair your range of motion, and severe issues can affect your quality of life. There may be signs that your spine is misaligned, along with pain around several joints in the body.14 Oct 2019

What does it mean to spine a golf club?

A golf shaft is said to have a 'spine' if it is inconsistent in its stiffness when bending in different directions. Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining. '6 Feb 2020

How do you spine a golf club?

1:503:31How to Find the Spine of a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen you want to mark at the top of the shaft for each time that. It. You feel it click into place.MoreThen you want to mark at the top of the shaft for each time that. It. You feel it click into place. And you'll see each time I do this. It's going to pop into the same.

How important is arrow spine alignment?

0:2511:17Spine Indexing: Is It Worth Your Time? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe spine of that that arrow. And make sure that all those arrows are flexing identically when they'MoreThe spine of that that arrow. And make sure that all those arrows are flexing identically when they're coming out of the bow. So it used to be that you had to kind of like.

Do driver shafts have a spine?

all shafts have a spine and when you custom fit a driver shaft you ensure spine alignement towards the face of the shaft. when you start to ajust the shaft position, then you move the spine position facing a different direction.30 May 2012

How do you Flo a golf shaft?

8:1315:58How to FLO a Golf Shaft (correct position of shaft alignment) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when I was referring to twing or ping or whatever you want to call it. That's how you do simplyMoreSo when I was referring to twing or ping or whatever you want to call it. That's how you do simply put a little pressure on the shaft.

How do you fix a bent golf shaft?

Take your golf towel and rub the shaft vigorously up and down. The friction will heat up the shaft to a point where you can straighten a slight bend. (Yes, it actually works.) Use nail polish for a custom, Tour-pro-grade paint job on your irons and wedges.

What is frequency matching in a golf shaft?

Frequency matching shafts only measures the butt flex of the shaft and allows the club maker to perfectly match a set of golf clubs. It is up to the club fitter to match a shaft to the golfers swing needs.4 May 2019

How do you check arrow spine alignment?

2:4813:20Build More Accurate Arrows using Arrow Spine Indexing - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe arrow certain a circumference around the arrow. And then marking the stiffest spot on the arrow.MoreThe arrow certain a circumference around the arrow. And then marking the stiffest spot on the arrow. That is called arrow spine indexing.

How do you align an arrow spine?

0:518:21Tech Tuesday | Spine Alignment | Victory Archery - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe the paradox of arrow is going to be vertical. So you want that spine alignment mark to be at theMoreThe the paradox of arrow is going to be vertical. So you want that spine alignment mark to be at the 12 o'clock. Or six o'clock. Position i prefer the 12 o'clock because the graphic sits up.

What is arrow indexing?

0:264:25Two Minute Tip: Spine Indexing Your Arrows - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut it's something that you just don't really think about that. Much spine indexing arrows what thatMoreBut it's something that you just don't really think about that. Much spine indexing arrows what that refers to is. I'm going to take an arrow.

What is Spine Aligning?

First, every golf shaft has a “spine”, and that spine is stiffer than the rest of the circumference of the shaft. (Nobody should argue that the spine is not the stiffest part of the shaft, but proof can be seen when rotating a shaft on a frequency machine. You get a stiffer reading when the spine is oriented the direction the shaft is deflected.)

Are there any negatives to Spine Aligning?

1. It is a fairly time consuming process, so it costs some money. (It’s not very expensive if you’re starting with a new set of custom clubs, But if you want to spine align an existing set of clubs, it can get quite costly.)

Sunday, April 25, 2010

Ahhh, here we come to one of the more mysterious aspects of clubmaking...spine alignment. A quick definition is in order to make sure that we are all on the same page as we delve into one of the most mis-understood tools in the clubmaker's chest as it relates to the pursuit and art of creating the most consistent set of clubs possible.

Spine Alignment in Golf Shafts...VooDoo or Valid?

Ahhh, here we come to one of the more mysterious aspects of clubmaking...spine alignment. A quick definition is in order to make sure that we are all on the same page as we delve into one of the most mis-understood tools in the clubmaker's chest as it relates to the pursuit and art of creating the most consistent set of clubs possible.

What Is Spining?

We turned to golf equipment guru and custom clubmaker Tom Wishon, founder of Tom Wishon Golf Technology, for a more in-depth explanation of spining.

The Importance of Spining in Today's Golf Shafts

Spining was once a pretty important service provided by custom club fitters to highly skilled golfers and to other golfers who love diving deep into the technical side of golf equipment. But with the improved golf shaft manufacturing standards of today, is spining still important?

Do Recreational Golfers Need to Think About Spining?

The answer to this question is easy: No. The spining of golf shafts is not something that any recreational golfer needs to be concerned about, nor is it a service on which any recreational golfer needs to spend money today.

glock35ipsc

I had the AXE Tour SL shaft in my Maltby KE4 head that was PUREd, but can't give an honest answer about whether or not it made a difference. The shaft in my current driver (not PUREd) was installed with the logo down for a cleaner look, and I can honestly say I have about the same dispersion with it as with the PURE shafted driver.

bradsul

I had the AXE Tour SL shaft in my Maltby KE4 head that was PUREd, but can't give an honest answer about whether or not it made a difference. The shaft in my current driver (not PUREd) was installed with the logo down for a cleaner look, and I can honestly say I have about the same dispersion with it as with the PURE shafted driver.

WUTiger

General theme I hear from teaching pros and clubsmiths: Recent increases in qualilty control for name-brand shafts has made spining and puring unnecessary. ( Caution: on occasion the component makers will produce a bad batch of shafts - spining and puring can't cure this - you just need to replace the shafts.)

inthecup

General theme I hear from teaching pros and clubsmiths: Recent increases in qualilty control for name-brand shafts has made spining and puring unnecessary. ( Caution: on occasion the component makers will produce a bad batch of shafts - spining and puring can't cure this - you just need to replace the shafts.)

dbwood

I've used bearing based spine finders and they will find the residual bend or warp of the shaft, or sometimes an oval in the shaft butt, but they won't tell you the whole story.

David Lake

All of our shafts go through flex plane orientation (spine aligning) as part of our proprietary Shaft Optimization Process . If a golf club is shafted without regard to its inherent flex plane the shaft will try and rotate around its axis to a position of stability during the swing which creates an oscillation of the shaft and club-head.

JML22

but something MASS MASS produced like the burner, it's likely to be any which way. When i put the prolaunch red into my burner i got it spined and i'm not sure if it's the spining or the higher torque that straightened out my drives