STANDARD GOLF CLUB LENGTH SPECIFICATIONS
| Irons | Men's Traditional (STEEL) | Men's Modern Standard (STEEL) | Women's Modern Standard (STEEL) | Golfsmith's Men’s Standard (STEEL) |
| 1 | 39" | 39.5" | 38.5" | 40" |
| 2 | 38.5" | 39" | 38" | 39.5" |
| 3 | 38" | 38.5" | 37.5" | 39" |
| 4 | 37.5" | 38" | 37" | 38.5" |
What is the standard length for a golf club?
What Is the Standard Length of a Golf Club?
- Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf, published by the United States Golf Association.
- Graphite Vs. Steel. ...
- Drivers. In a 2010 “Golf Digest” article, PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.
- Irons and Hybrids. ...
What is the length of a 5 iron golf club?
There are no specific industry standards for golf club length, but different manufacturers have differing lengths for clubs. A 5-iron from a particular brand is 37.75 inches, others 38 inches or even 38.5 inches long. We cannot stress enough, the importance of a golf club’s length and its effect on your performance.
What is the standard length of 7 iron?
What is the Standard Length of a 7 Iron? The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.
What is the standard length of irons?
The standard length of men’s golf irons is 37.5 and women’s golf iron is 35.5 inches. Length of Golf Wedge Wedges are the shortest clubs in your bag. You won’t see many variations in the length of wedges. For wedges, variety comes mostly in their loft and bounce. Ping has a length of 35 to 35.5 inches.
How long is a standard 1 iron?
Standard Length for Irons The same is true for graphite golf irons: the standard length for a 1 iron measures 40 inches, a 5 iron is 38 inches and a 9 iron is 36 inches. As is true for woods, the standard length measurement for women's irons is 1 inch less for both steel and graphite irons.
What is standard length for golf clubs?
All clubs, including putters, must at least 18 inches long. Putters with straight shafts are measured from the top of the grip to the sole, directly down the shaft.
How long should golf irons be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
What is a standard 7 iron length?
What is the Standard Length of a 7 Iron? The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.
What length irons do I need?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″6'4″ to 6'6″plus 1″7 more rows
How long should my iron shafts be?
If the crease where your wrist and hand meet to the floor is: 29-32 inches, your irons should be based on a 5-iron length of 37 inches. 33-34 inches, your irons should be based on a 5-iron length of 37 1/2 inches. 35-36 inches, your irons should be based on a 5-iron length of 38 inches.
What is the length of a standard 5 iron?
With steel shafts, the standard length of a 5 iron golf club is 37.5 inches. With a graphite shaft, the standard length for men is 38 inches and for women, it stands at 37.25 inches. A 5 iron golf club usually offers a 28-degree loft angle.
What height are standard golf clubs made for?
Today it is 45”, and some manufacturers have even gone to 45 1/2” as their norm. However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer's ability to hit the ball on the sweet spot of the club face.
How do I know if my irons are too short?
If the heel of the club is off the ground, chances are your clubs are too short. The ideal position is to have your club sitting flat on the ground. If your heel is sitting up a bit, you'll probably find yourself pushing a lot of shots (straight right for the right-handed golfer).
What is the standard length of Taylormade irons?
SHAFTSCLUB4PWLOFT19°43.5°LIE61.5°64.5°OFFSET5.8mm2.6mmLENGTH38.88"35.50"1 more row
Are golf irons different lengths?
A standard set of golf irons has clubs of all different lengths. The shorter irons are the wedges, nine iron, and 8 iron. Then you have mid-length irons and then finally long irons like the five, four, and three iron. As you move up in the set, the irons get quite a bit longer.
How long is a standard 9 iron?
The standard length of a steel 9 iron for male golfers is 35.5 inches. The standard length of a 9 Iron for female golfers is 34.5 inches.
How long should a golf iron be?
For most golfers, the length of a golf iron should be 38.75 inches. The height of the player is one of the primary factors that determine the length of the golf irons. There is no average length that can be considered to be suitable for a large number of players. A player who is 6 feet and 3 inches tall will often not be very comfortable using ...
What is the standard length of a 9 iron golf club?
With graphite shaft, the standard length for men is 34.35 inches and for women, it is 33.75 inches. A 9 iron club is categorized as a short iron golf club. The 9 iron features a high-mass clubhead and a short shaft.
Why do golf clubs have long shafts?
Golfers often use long shafts in their golf clubs as they feel that the club with a longer shaft would help it to cover a large distance. This is not exactly true but lengthening golf irons does have a direct impact on your game and performance. There are different ways in which you can lengthen your golf iron.
Why use single length irons?
Here are a few reasons why some golfers may prefer using single length irons: 1 It’s easy to hit by having a shorter shaft on low-loft irons 2 You can have the same swing on all the shots 3 The player doesn’t have to reposition the ball or change anything between two shots
How long is a 5 iron golf club?
With steel shafts, the standard length of a 5 iron golf club is 37.5 inches. With a graphite shaft, the standard length for men is 38 inches and for women, it stands at 37.25 inches. A 5 iron golf club usually offers a 28-degree loft angle. The 5 Iron is a mid-range golf club featuring an iron clubhead.
Why shorten your iron?
Shortening the length of a golf iron helps to hit shots at the center of the clubhead consistently. A lot of players feel that their shots are more accurate once they shorten their irons.
What is a 5 iron?
The 5 Iron is a mid-range golf club featuring an iron clubhead. This is largely used from the rough and the fairway. It’s also appropriate to use the club in slightly higher surfaces or hilly areas. It helps the player in avoiding the possibility of hitting a low rise shot.
What type of shafts do golfers use?
For example, most golfers use graphite shafts in their woods these days; titanium or other alloys are common in metal "woods"; and most irons today are investment cast, rather than forged.
What is the men's modern standard?
Keep in mind the official "Men's Modern Standard" is for steel and these standards were established when steel shafts, persimmon woods, and forged irons dominated the golf equipment market. Though technology has significantly changed golf equipment.
How many degrees of loft does a golfer have?
The average male golfer still hits a club with 24 degrees of loft and an overall length of 38 inches, 170 yards. What has changed is that the number assigned to the club has changed from a ‘3’ to a ‘5’.
Can you use a 7 iron as a 6 iron?
When you take a 7 iron and substantially decrease the loft and extend the shaft by up to an inch you have effectively turned it into a 6 iron and yes , 6 irons will go further than 7 irons. Between 1970 and the present most if not all club manufactures have strengthen the lofts, and extended the shafts on off the counter iron sets, ...
How long is a golf iron?
The same is true for graphite golf irons: the standard length for a 1 iron measures 40 inches, a 5 iron is 38 inches and a 9 iron is 36 inches. As is true for woods, the standard length measurement for women's irons is 1 inch less for both steel and graphite irons. For instance, a 1 iron is 38.5 inches and a graphite 1 iron is 39 inches.
How long is a steel driver?
Standard Length for Woods. The standard length of a steel driver for a man is 44 inches; a graphite driver is 44.5 inches; steel 3s, 4s and 5 woods are 42.5, 42 and 41.5 inches, respectively; graphite 3s, 4s and 5 woods are 43, 42.5 and 42 inches, respectively; both the 7 and 9 woods are 41 inches for steel and 41.5 inches for graphite;
How long are graphite wedges?
The standard length for steel and graphite wedges for men is 35 and 35.5 inches, respectively; the standard length for steel and graphite wedges for women is 34 and 34.5 inches, respective ly.
How far apart should you measure for street shoes?
When measuring, stand "at attention" with your feet approximately 1 foot apart. To yield the best results, have a professional assist you with this process.
How do golf clubs affect your game?
Your golf clubs translate directly to your game. If the clubs aren't fitted to your height and swing, they'll affect your shot. According to GolfSpyder.com, clubs that are too long or too short impair your ability to transfer your weight during your swing. They can also cut your swing short, with the club hitting the ground too soon. Golf clubs should be sized according to the industry's specific length standards for both men and women.
Can golf clubs be cut short?
They can also cut your swing short, with the club hitting the ground too soon. Golf clubs should be sized according to the industry's specific length standards for both men and women.
How long can a golf club be?
Section 1c states that golf clubs other than putters may not exceed 48 inches long.
Why are graphite shafts longer?
Graphite shafts are longer, Kramer notes, to help golfers build greater clubhead speed, thereby gaining more distance on their shots. Shorter golfers or those who are uncomfortable with longer shafts can order their graphite shafts shorter to match the length of a comparable steel-shafted club.
Can you set standard lengths for golf clubs?
A club length that suits one player won’t necessarily suit another, which is why there are professional club fitters. With respect to off-the-shelf clubs, there is no organization authorized to set standard lengths for golf clubs.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Does golf club length matter?
Golf club length matters a ton. If you’re holding proper form, where your back and arms are straight and your core is engaged when you swing, then you’re doing all that you can on that front. When you swing the club, it’s supposed to effortlessly collide with the ball and send it flying.
Is a wood longer than an iron?
All of your woods are likely longer than all of your irons. While the iron is meant for distance, the wood is meant for height. When you’re standing in position and the ball is directly in front of you, the angle of the wood sends the ball through the air better than any other club type.
Is a putter shorter than a driver?
Putter. Your putter isn’t much shorter than your average driver. It actually mimics a similar feeling to it if during your swing, but the head is noticeable lighter. The length is to compensate for the lighter head. You can’t lightly tap the ball in if the head is heavy and the shaft is short.
How long is a 0.370" iron shaft?
decreasing in length from #3-PW). 0.370" parallel iron shafts arrive in uncut lengths, usually 41" or 42" for irons or 46" or more for woods.
What is the shaft of a golf club?
Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job.
What is shaft flex?
Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), ...
choeppner
Need a quick question answered. I am getting ready to trim my new Aerotech Shafts to go into my irons. I need to know what the Standard length is for a 5 iron, shaft only. I am looking online, and some sites show it is 38 inches, and some sites show 37.5 inches. Which one is correct?
choeppner
They aren't all the same length. They are already stepped at 1/2" Increments.
jowwy
well without having any prior knowledge of these shafts - i would say that they are taper tipped shafts and they would not need any tip trim at all and just butt trim to length
choeppner
They are .355 Taper Tips. The measurement I am looking for is the RAW 5 iron length, not installed in a head. I need to prep the shafts for some heads that are arriving today.
jowwy
According to the data spec sheet on the i110w's the 3 iron shaft is 40" and the wedge shaft 36.5 if they decrease in half inch increments that would make the raw length of the five iron shaft 39" uncut.......
choeppner
How much would I need to Butt Trim these to get them to play standard length in a set?
Types
Standard Length For Woods
- The standard length of a steel driver for a man is 44 inches; a graphite driver is 44.5 inches; steel 3s, 4s and 5 woods are 42.5, 42 and 41.5 inches, respectively; graphite 3s, 4s and 5 woods are 43, 42.5 and 42 inches, respectively; both the 7 and 9 woods are 41 inches for steel and 41.5 inches for graphite; steel 11s and 13 woods are 40.5 and 40 inches, respectively; graphite 11s and 13 w…
Standard Length For Irons
- The standard length for a steel 1 iron for a man is 39.5 inches. This standard measurement increases 1/2 inch for each consecutive number iron. For example, standard length for a steel 2 iron is 39 inches; a 3 iron is 38.5 inches; a 4 iron is 38 inches and so on to the steel 9 iron with the standard length of 35.5 inches. The same is true for graph...
Custom-Length Clubs
- According to LearnAboutGolf.com, standard-length woods and drivers should suit most average-size golfers. Sticking to these lengths allows for optimal speed and accuracy on the course. However, this may not be true if you are shorter or taller than average. Consider custom-length clubs if you find that you have trouble with standard golf clubs. The length of custom clubs, as s…