Golf-FAQ.com

what is the biomechanical term that explains a slice in golf?

by Mr. Erling Lubowitz V Published 2 years ago Updated 2 years ago

What is a slice in golf?

A "slice" is a type of golf shot in which the golf ball curves dramatically in flight from left to right (for a right-handed golfer). The slice can be played intentionally, but is usually the result of a mishit. Slices are the most common problem for recreational and high-handicap golfers.

What is the biomechanics of the golf swing?

The Biomechanics of the Golf Swing. The arms stay in front of the chest as the shoulders turn. The left deltoid, left latissumis dorsi, right rhomboideus major and left teres major are extended at the top of the swing. The hips create tension in the back by restricting rotational movement. ...

What causes a sliced shot on the golf course?

At its root, a sliced shot is caused by the clubface arriving at impact with the golf ball in an open position. This may be due to setup or swing issues that cause the face to open, or to an outside-to-inside swing path that effectively opens the face by "wiping" or "swiping" across the golf ball,...

What are the different terms used in golf?

The list, although not exhaustive, is designed to be a complete A to Z of all Golf Terms/Lingo used in golf. Ace – Otherwise known as a hole in one an ace is when the ball finds the hole from the tee in a single stoke. It is the dream of many golfers. Address – The way you stand and position your club before a shot is known as address.

What is a slice in golf?

What causes a slice in golf?

How to fix a slice in golf?

Why is a slice shorter than a properly hit shot?

What are the different types of slice?

When to slice a golf ball?

Where does a push slice start?

See more

About this website

What is a slice called in golf?

A slang term for a slice is "banana ball." The slice is the opposite of a hook shot. A sliced shot may start left of the target line and then bend dramatically back to the right of the target. Or the ball can begin on the correct target line before swerving right.

What biomechanics are used in golf?

The common golf biomechanics principles necessary to understand golf technique are stability, Newton's laws of motion (inertia, acceleration, action reaction), lever arms, conservation of angular momentum, projectiles, the kinetic link principle and the stretch-shorten cycle.

Why is it called a slice golf?

The word slice was thought of to describe a golf shot at a similar time to the word 'cut', which is used to describe a slight fade of the ball.

What causes a slice or hook in golf?

While a hook is the result of a closed club face, a slice is caused by an open club face. Now, my fellow golf instructors may want to interject and remind me that you can also slice the golf ball with a closed club face. For the sake of simplicity, we're just working with this far more common hook vs.

What are the biomechanical principles?

The biomechanical principle of motion relates to linear motion, velocity, speed, acceleration, and momentum. Motion is a movement that results from a force. In any physical activity, there are multiple forces and motions occurring.

What are the phases of a golf swing?

Based on the movement characteristics, golf swing can be decomposed into five phases: take-away, backswing, downswing, acceleration, and follow-through.

What is the most common cause of a slice in golf?

The most common cause of a slice is an open club face. This open club face will give you contact that isn't square and often feels like a “side swipe.” The most common cause of an open club face is an incorrect grip as your hand position will directly reflect in the face.

What does splicing mean in golf?

As a verb "to splice" means to join the shaft to the clubhead. But its use is specific to scared joints. As a noun "the splice" was the point where shaft actually mated with the clubhead.

What is a slice and draw in golf?

A hook or a draw is a golf shot that goes from right to left, whereas a fade or slice is a shot that goes from left to right. This applies to right-handed golfers, if you're a left-handed golfer please reverse all techniques within this article.

What is the difference between a shank and a slice?

Now, as I mentioned above, a shank occurs when you hit the ball off the hosel of your golf club. In a slice, you hit the ball fairly close to the center of the club face. This means that while a shank feels bad from the very beginning, a slice initially feels like a clean, solid shot.

What is the difference between a slice and a push?

A block is another word for a push — a ball that flies right of the target without any curve. A slice is a shot that curves to the right (for a right-handed golfer).

What's the difference between a fade and a slice?

A fade shot will start to the left, curve to the right and finish on the target, while a slice shot will start to the left before curving more through the air to finish quite a long way to the right of the target.

How are slice and shank golf shots similar?

Both shots move in a similar direction away from the golfer and are results of an outside-in swing with an open clubface. However, the primary difference is where the golf club makes contact with the golf ball. For a slice, the golf ball makes contact somewhere on the clubface, providing a much cleaner feeling and normal-sounding shot at impact.

What is a slice and hook?

A slice and a hook are both mishit golf shots resulting from a combination of swing flaws but that is where the similarities end. A slice is as previously discussed, a sharply curving golf shot that moves left to right for right-handed golfers and right to left for left-handed golfers.

How are slice and fade similar?

A slice and a fade are both similar in that the spin exerted on the ball moves it to the right for right-handed golfers and left for left-handed golfers. The spin on a golf ball from a fade allows it to land softer and typically does not roll out very far. However, there are a couple of distinct differences between the two.

What is a draw in golf?

A draw is a type of shot that is the exact opposite of a fade and nothing like a slice. It is a controlled shot and the result of an inside-out swing with a clubface square to the target. For a right-handed golfer, the ball starts right of the target line and gently falls left back towards the intended target. The spin placed on a golf ball from a draw promotes topspin and usually rolls more once it lands.

What is a slice in golf?

By John Wagner. A slice is a golf shot that curves off to the right (for right-handed golfers). It is one of the most common mis-hits for amateurs. Many golfers struggle with a slice because they don't understand the cause. The physics that cause a slice revolve around two things: the club face and the swing path.

What causes a slice in golf?

A standard slice is caused by an open club face and an outside-to-in swing path. These combine to create the sidespin that causes the ball to go right. The more open the club face is at impact, the more sidespin the ball will have. The swing path determines the starting point of the slice.

How to fix a slice in golf?

To fix a slice, the golfer has to square the clubface and swing on the correct path. Closing your clubface more during your swing is one way to correct that element. The golfer must also fix a downswing that comes over the top, causing the club to swing across the ball from an outside-to-in path. Try closing your stance and swinging along ...

Why is a slice shorter than a properly hit shot?

Having more backspin causes a slice to be much shorter than a properly hit shot. The sidespin causes the ball to curve to the right in the air and then bounce and roll even further right when it hits the ground.

What are the different types of slice?

There are three different types of slices: a pull slice, push slice and standard slice. The pull slice starts left of the target and slices back to the right. A pull slice will end up the straightest of the three because it starts left.

When to slice a golf ball?

When to Slice. There are some instances where slicing can be beneficial. One would be when playing a hole that has a severe dogleg to the right. A controlled slice allows the ball to follow the design of the hole. You might also want to hit a slice when your ball is in the woods and you have to curve the ball around a tree.

Where does a push slice start?

A push slice starts right of the target and slices even further--it is the most detrimental. A standard slice starts down the target line and then goes right.

Why do we look at biomechanics?

It’s not to a word or study to make things endlessly complicated for no real reason. In fact I think the best coaches are the ones that have such a good understanding of this that they are able to make things VERY simple for students.

Kinematics

Kinematics is the description of the actual motion without regard to the forces producing it.

What should I not do if I have a slice?

One thing you should NOT do, if you are experiencing a slice, is to try to start swinging your club more to the left to make sure it doesn’t go right. It’s a natural solution for most golfers; likely you will start monkeying around with your setup and alignment in this self-discovered solution.

How can I improve my golf game?

If you can do that, your coach will be able to help you play better golf quicker. One way golfers can often get confused is understanding the difference between a block and a slice. Not every shot that goes to the right is a slice.

What is a block shot?

A block is generally the miss of lower handicaps and professionals. People typically block a shot when they are concerned about the ball going left. Because they don’t want their clubface to close, they will ‘hold onto a square clubface’ through impact.

What is a fat shot in golf?

The specifics and colors can vary from course to course. Fat – A fat shot is when the club strikes the ground before the ball.

What is an ace in golf?

Ace – Otherwise known as a hole in one an ace is when the ball finds the hole from the tee in a single stoke. It is the dream of many golfers.

What is a baseball grip?

Baseball Grip – A type of grip that resembles a baseball bat grip. Others might call it a 10-finger grip. Below the Hole – A term that refers to a putt where the hole is at a higher elevation than the ball. Big Dog – A Driver. Bite – A term used by golfers for a golf ball to stop rolling.

Why is backspin important in golf?

It is important for distance and accuracy. Backspin – Spin is very important in most aspects golf and you will often come across the term when comparing clubs or in golfing instructions. Simply put, more backspin will give you a high ball with a fair amount of control.

What is a local rule in golf?

Local Rule – Specific rule or rules that are not mainstream and only for that particular golf course. Long – A term for a golfer who hits the ball far (Dustin Johnson). Long Game – Refers to hitting long irons, woods, hybrids, and driver. Lob Wedge – A type of wedge that is usually in the 60 to 64-degree range.

What is the back nine of a golf course?

Back Nine – This refers to the last 9 holes of a typical 18 hole course, also known as heading in. Backswing – As the term suggests, this is simply the action taking when swinging back before striking the golf ball. It is important for distance and accuracy.

What is green in regulation?

Green in Regulation – Occurs when the golf ball is on the green and the player is putting for a birdie or better. Green Fee – The cost of playing a round of golf at a certain golf course. Grip – There are a number of different grips golfers use to hold the club.

What is a slice in golf?

By John Wagner. A slice is a golf shot that curves off to the right (for right-handed golfers). It is one of the most common mis-hits for amateurs. Many golfers struggle with a slice because they don't understand the cause. The physics that cause a slice revolve around two things: the club face and the swing path.

What causes a slice in golf?

A standard slice is caused by an open club face and an outside-to-in swing path. These combine to create the sidespin that causes the ball to go right. The more open the club face is at impact, the more sidespin the ball will have. The swing path determines the starting point of the slice.

How to fix a slice in golf?

To fix a slice, the golfer has to square the clubface and swing on the correct path. Closing your clubface more during your swing is one way to correct that element. The golfer must also fix a downswing that comes over the top, causing the club to swing across the ball from an outside-to-in path. Try closing your stance and swinging along ...

Why is a slice shorter than a properly hit shot?

Having more backspin causes a slice to be much shorter than a properly hit shot. The sidespin causes the ball to curve to the right in the air and then bounce and roll even further right when it hits the ground.

What are the different types of slice?

There are three different types of slices: a pull slice, push slice and standard slice. The pull slice starts left of the target and slices back to the right. A pull slice will end up the straightest of the three because it starts left.

When to slice a golf ball?

When to Slice. There are some instances where slicing can be beneficial. One would be when playing a hole that has a severe dogleg to the right. A controlled slice allows the ball to follow the design of the hole. You might also want to hit a slice when your ball is in the woods and you have to curve the ball around a tree.

Where does a push slice start?

A push slice starts right of the target and slices even further--it is the most detrimental. A standard slice starts down the target line and then goes right.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9