The body of a golf cart is primarily made of sheet steel, fiberglass or sheet aluminum. The frame is generally made of steel while tires, foam seat cushions and steering mechanisms are made of rubber, vinyl and metal. Parts like suspensions, drive trains, motors and brakes use metal.
What is the best golf cart?
- Low maintenance golf cart
- Yamaha is a top brand for gas carts
- Easy to find replacement parts if necessary
- Works around town and on the course
- Very quiet gas golf cart
How to speed up a club car golf cart?
To test the MCOR in your 2008 Club Car Precedent golf cart, follow these steps:
- You will need a DVM.
- Set the units to Ohms.
- Remove the floor mat and unscrew the 4 screws you see holding the pedal assembly.
- Now, separate the harness having 3 wires.
- Connect the DVM leads to where the yellow and white wires were on the MCOR.
- Ask someone to help you to press the pedal slowly.
Should I insure my golf clubs and golf cart?
- Golf cart insurance is an insurance policy that covers damage to your golf cart and damage that your golf cart causes.
- Buying golf cart insurance depends on where you ride and how you use your golf cart.
- It covers bodily damage liability, property damage liability, collision and comprehensive damage to your cart.
Does a club car golf cart have an odometer?
The EXRAY speedometer and odometer for EZGO is extremely useful for drivers wanting to use their golf cart on the streets or may have already gotten a speeding ticket before. This should keep your speed in check. Club Car XRT EXRAY Speedometer Kit Key Features: Fits Club Car XRT gas models; Average speed/max speed; Amber warning light; Clock
Does Club Car golf cart have an aluminum frame?
Club Car is one of the strongest competitors to EZGO and often focuses on an aluminum frame, but elegant design. Club Car offers standard aluminum models for their carts. Though some steel options are available, they are very rare.
What is Club Car frame made from?
aluminum frameClub Car comes standard with a light weight aluminum frame that will not rust. They offer smooth suspension systems. Club Car golf carts, when well maintained, will last for over twenty years. Parts are readily available.
How do you restore plastic on a golf cart?
0:079:35HOW TO: PERMANENT renewal of Golf Cart, 2yr Dry-Seal & UV block ...YouTubeStart of suggested clipEnd of suggested clipFor the rubber we're going to use four new protect black to restore the level of carbon black.MoreFor the rubber we're going to use four new protect black to restore the level of carbon black.
How do you paint a golf cart body?
14:2216:05How To Paint A Club Car Precedent Golf Cart at HOME - YouTubeYouTubeStart of suggested clipEnd of suggested clipJob front to back everything clear coat primers base coat sandpaper. Everything about 115 bucks tiedMoreJob front to back everything clear coat primers base coat sandpaper. Everything about 115 bucks tied up into it and you know it may look like 115 paint job but i painted it.
Is a golf cart windshield frame metal or plastic?
The majority of golf cart windshields are made of polycarbonate, acrylic or PVB (plastic vinyl butyrate). The plastics listed above are generally very strong and can withstand many types of damage. Their strength is also why they tend to be more durable than other windshield materials.
How long does a Club Car golf cart last?
For example, some experts estimate that the average golf cart has a useful life range of about 5-7 years. That said, golf carts can still be used for 10 years or more depending on how well they are maintained and how much money a buyer wants to put into their vehicle.
Will wd40 restore black plastic?
0:123:19HOW TO - Restore black trim with WD 40 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd that should be this hope you can see the difference I mean it's already looking much betterMoreAnd that should be this hope you can see the difference I mean it's already looking much better excellent and it doesn't even feel sticky or anything feels like a normal door handle.
Can you paint a golf cart body?
If you want to spruce up your golf cart, you can give it a new paint job. You can even make your golf cart stand out by painting the body any color that you want. Painting a golf cart body is not too difficult and can be completed in an afternoon.
How do you paint a fiberglass golf cart body?
What kind paint and primer do I use on fiberglass golf cart? Fiberglass surfaces are nonporous, much like plastic, and react best to acrylic spray paint. Make sure you apply at least two coats of acrylic paint primer before painting.
How much does it cost to have a golf cart painted?
It can cost anywhere from $400–$700 to get a golf cart painted. The variation in cost is going to be dependent on where you live and what type of cart you have. If you have a larger cart, you may end up spending a bit more. You may also spend more if you are going to have some custom paintwork done on your cart.
What paint is best for plastic?
Use paints that are specifically formulated to adhere to plastics. There are several available on the market such as Krylon Fusion for Plastic® , Valspar® Plastic Spray Paint , and Rust-Oleum Specialty Paint For Plastic Spray . If using regular spray paint then your item will need to be primed.
What is the difference between a Club Car DS and a Club Car Precedent?
The Club Car DS body panels on the rear and front are made of fiberglass and plastic respectively that makes them quite sturdy. On the other hand, the frame of the Club Car Precedent is made of flexible and bendable material with a 360° wraparound bumper.
What are golf cart frames made of?
Raw Materials. The frames of golf carts are usually made out of steel plates, rods, and tubing. The bodies may be made of sheet aluminum, fiber glass, or sheet steel. Other components, usually plastic or metal, are generally purchased from outside suppliers and assembled to the vehicle.
What is a golf cart?
Background. A golf cart is an electric or gas-powered vehicle used to transport golfers and their equipment around the course during play. Designed to meet golfers' needs, the carts offer a number of specialized safety and comfort features. For example, the fact that they are built low to the ground gives them a low center of gravity, ...
How do golf carts get delivered?
After being driven onto the truck, the golf carts have their fuel drained, their batteries disconnected, and their wheels blocked in place. Overseas shipments require that the golf cart be placed on a skid—a heavy wood or steel rack—to discourage shifting in transit.
How many volts does a cart have?
If the cart is to be electric-powered, a 36-volt direct current electric motor is bolted to the transaxle. If the cart is to be gasoline-powered, an eight-horsepower gasoline engine is bolted to the chassis. The continuously variable (CV) transmission is also bolted to the chassis.
What are the waste products of golf carts?
The manufacture of golf carts creates four major types of waste products: metal chips and contaminated coolant from the machining operations, cardboard shipping materials, and paint overspray. Although difficult to collect and sort, metal chips can often be sold to recyclers. Contaminated coolant is just the opposite. It is easy to gather and difficult to dispose of. As the coolant is used it is contaminated with tramp oil, lubricant that leaks out of machines. The coolant also supports bacterial growth. Some companies use holding ponds to break down this bacteria in sunlight; they then recycle the coolant once the tramp oil has been filtered out. Most companies, however, just pay to have the oil hauled away by a waste disposal company.
What are the components of a car?
These include components such as tires, which are made out of rubber; seat cushions, which typically consist of foam cushion covered by vinyl; steering mechanisms, made of metal; and motors, brakes, batteries, transaxles, suspensions, drive trains, and electrical cables.
What can be built into a golf dashboard?
AM/FM radios and cassette players can be built into the dashboard, as can ashtrays and cigarette lighters. A number of country clubs began to develop private courses during the closing decades of the nineteenth century, and the United States Golf Association (USGA) was founded in 1894.
What is a golf cart made of?
The body of a golf cart is primarily made of sheet steel, fiberglass or sheet aluminum. The frame is generally made of steel while tires, foam seat cushions and steering mechanisms are made of rubber, vinyl and metal. Parts like suspensions, drive trains, motors and brakes use metal. The 1993 model Club Car used an indestructible thermoplastic ...
How to repair a crack in a golf cart?
You can try the following options to repair cracks on a plastic golf cart body. Drill through the crack in a V shape and put a plastic weld on the rear. Fix some plastic tape on the front side so that the weld doesn’t push through. Drill the crack at the end so that it doesn’t become bigger.
How to restore a golf cart?
Steps. Apply some dish soap all over the golf cart and wash it using a hose fitted with a fine spray nozzle. Use a microfiber cloth to spread the dish-wash soap uniformly, both inside and outside the cart. Take some water in a bottle with a spraying mechanism and spray on the surface that has to be restored.
How to clean a golf cart with soap?
Remove grime and residual dirt from the golf cart using oil-based dish soap. Wash the soap off using cold water from a hose. Wipe the cart using a towel and let it dry completely.
How to paint a dark cart?
Apply a thin coat of plastic primer spray paint on the surface to be painted. You might need an extra coat if you’re planning to give your dark colored cart a light color. In this case, give a drying time of about half an hour before you apply the second coat. Paint the cart using acrylic or plastic-fusion paint.
Club Car Precedent OEM Front Cowls
Front Cowls. Manufactured by Club Car® Will fit Club Car® Precedent® Golf Carts. OEM Precedent® front cowls made by Club Car® from flexible molded plastic. The color is molded into the bodywork so the color [...]
Club Car Precedent OEM Rear Bodies
Rear Bodies. Manufactured by Club Car® Will fit Club Car® Precedent® Golf Carts. OEM Precedent® rear bodies made by Club Car® from flexible molded plastic. The color is molded into the bodywork so the color [...]
Club Car Precedent OEM Rear Underbody
Rear underbody full bumper trim piece, OEM. Manufactured by Club Car® Will fit Club Car® Precedent® Golf carts. Item #: 11-006 Club Car Precedent OEM Rear Underbody $379.50
Club Car Precedent OEM Front Fascia
Front fascia bumper trim, OEM. Manufactured by Club Car® Will fit Club Car® Precedent® Golf carts. Item #: 11-003 Club Car Precedent OEM Front Fascia $45.50
What was the first golf cart named?
The first cart was named “Caroche,” which was supposed to provide it with a sense of elegance. But that intention backfired, as golfers didn’t know how to pronounce the French word for carriage and many ended up saying something like “car roach,” which soon morphed into “cockroach.” As such, that name was quickly abandoned.
What engine did Club Car use in the 1990s?
Club Car makes some changes. The next radical change in the 1990s was under the hood. In 1992, the company switched to a 9 horse power 286cc Kawasaki engine, dropping the older 341 cc side valve engine. And in 1995 it came out with its first 48-volt electric engine option, an upgrade from the previous 36-volt option.
When was the DS cart made?
This investment group brought in a new designer named Dom Saporito, who helped develop a more stylish DS cart, that was launched in 1982 and utilized the designer’s initials for its name. This model featured the company’s first 48-volt electric motor, adding about 30 percent more power to the previous drive-train.
How many bats do you need for golf?
You need one bat in baseball and one racquet for tennis and you don’t have to travel that far to use them. But golf relies on a battery of woods and irons, plus tees, balls, towels, brushes, scorecards, pencils and a few miniature entrenching tools packed all into a heavy bag and hauled around a 6,000 yard course.
Background
Design
- There is no standard design for a golf cart. Many choices must be made before the designer draws the first line. Should the body be made from steel, aluminum, fiber glass, or wood? Should it seat two, four, or six passengers? Is it to have an electric or a gasoline engine? Must the cart have a powerful engine and strong brakes to navigate hills, or a small engine to insure efficient operat…
The Manufacturing Process
- Fabrication of floor and body panels
1. 1 The floor and body panels are made of sheet steel, aluminum, or fiber glass. If sheet metal is used the metal is cut to size in a sheet metal shear, a machine that cuts it with giant scissors. It is then fed into a roll forming machine, which shapes the metal by passing it over contoured formi… - Chassis construction and painting
1. 2 Tubular steel, which resembles square bicycle handlebars, is cut to size and the edges beveled (cut at an angle of less than 90 degrees) to prepare them for welding. The cut, beveled pieces are then placed in a welding fixture, and the chassis, or frame, is arc-welded. In this proce…
Quality Control
- Quality control starts at the design development stage. Structural and fatigue tests are applied to the major components to assure that they will not break or wear out during normal usage. Once a prototype golf cart has been built, it is run on a mechanized track where it is subjected to shocks and severe vibration. Next, it is driven on a test track for hundreds of miles to test its endurance…
Waste Disposal
- The manufacture of golf carts creates four major types of waste products: metal chips and contaminated coolant from the machining operations, cardboard shipping materials, and paint overspray. Although difficult to collect and sort, metal chips can often be sold to recyclers. Contaminated coolant is just the opposite. It is easy to gather and difficult to dispose of. As the …
The Future
- One technical innovation that may become available within the next ten years is a battery that charges in minutes and works for many hours. Manufacturers may also begin producing carts with video games built into their dashboards, to help players pass time while waiting at the tee. Similarly, video screens featuring a computer-generated layout of each hole with the location of …