- Obtain the proper measuring tool. You will need at least a 48-inch ruler/measuring stick/tape measure in order to measure the length of your golf clubs.
- Position the golf club. The face of the golf club should be laying flat on a flat surface so that the face is parallel to the ground.
- Place the measuring stick directly behind the golf club. ...
- Sorry, the video player failed to load.
What is the standard length for a golf club?
What Is the Standard Length of a Golf Club?
- Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf, published by the United States Golf Association.
- Graphite Vs. Steel. ...
- Drivers. In a 2010 “Golf Digest” article, PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.
- Irons and Hybrids. ...
What is the average size of a golf club?
The standard length of a driver for men used to be 43.5 inches with a steel shaft and 44 inches for a graphite shaft. However, in the 21st century a standard driver is considered to be 45 inches. Most male golfers are wielding drivers that measure 45 to 48 inches, the maximum allowed under the United States Golf Association's Rules of Golf.
What length golf clubs do you need?
- 3-wood
- 4- and 5-hybrids
- 6- to 9-irons
- Pitching wedge
- Sand wedge
- Driver
- Putter
How to size golf clubs for better performance?
- Swing the clubs Swinging a standard-length club is an essential step in fitting golf clubs. ...
- Apply tape to the bottom of your clubs This step determines where your club will make contact with the ground. ...
- Identify your handicap Finally, identifying your handicap will allow you to match with the right club type. ...
How long should my golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
Does golf club length include the head?
Measuring different types of golf clubs requires an understanding of what we are actually measuring. In today's terminology, the “length” of a golf club is not the length of the shaft, but the length of the shaft and the club-head combined.
How do I measure my golf clubs with a tape measure?
Use a 48 in (120 cm) measuring stick since a standard yardstick isn't long enough. Position the end of the measuring stick or tape measure at the end of the grip at the top of the club. Check the measurement at the heel, which is where the sole of the club and shaft form a corner on the club face.
How do you know if your golf clubs are too short?
6 Signs Your Golf Clubs are Too ShortYou need to bend too much at the waist before swinging.You also have to bend your knees pre-swing.You keep hitting the ball with the golf club's heel.The swing path is in to out.The tempo is too quick.The ball tends to veer off to the right.
What length of golf clubs do I need?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″minus 1/4″5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″7 more rows
How do you measure golf clubs for yourself?
3:0615:40ARE MY CLUBS THE RIGHT LENGTH? FIND THE CORRECT GOLF ...YouTubeStart of suggested clipEnd of suggested clipStand in normal standing upright posture with your arms at your sides. And you're just going to takeMoreStand in normal standing upright posture with your arms at your sides. And you're just going to take a ruler just a standard yardstick. And you're going to measure.
What is the standard length for a 7 iron?
The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.
How long should my driver shaft be for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
How is driver length measured?
Simply hold your golf club at 45 degrees to the ground or as in your playing position. At this point take a golf club ruler or take measure and place under the sole of the club. Measure to butt of grip. This will give you you an accurate and USGA standard for measuring your golf driver.
How big is a golf club head?
Head Size. The largest driver head approved by the USGA weighs in at 460cc (club heads are measured by volume) and the smaller ones are 440cc or 420cc. The 460cc club heads have larger faces, and the weight is designed to fall into the lower back portion of the club head.
What is the legal length of a golf putter?
A putter (like all golf clubs) must be at least 18 inches in length. Drivers, woods, hybrids, and irons must remain less than 48 inches to be considered legal. Putters are not subject to this rule. There is no limit to the length of a putter.
How long can golf club shafts be?
Technically, Tuesday's announcement that the USGA and the R&A will reduce the maximum shaft length from 48 inches to 46 inches counts as a suggestion.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How long are putters?
The United States Golf Agency (USGA) limits the maximum length of golf clubs. The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
How to measure the length of a golf club?
Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface. This is the length of your golf club!
How to measure club length?
Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.
How to rock a golf club back and forth?
Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.
How to tell if a golf club is a standard length?
Determine if the club conforms to length standards. If the scale reads 0.0 or less, the length is less than 48.0 inches (122 cm) and conforms to the club length standard. If the scale reads greater than 0.0, the length is greater than 48.0 inches (122 cm) and it does not conform to the club length standard. Such a club could not be used in a professional golf game.
How long should a golf club be?
If you plan to play in a professional golf game, you’ll need to ensure your clubs conform to the club length standard of 48.0 inches (122 cm) or less. Measuring golf clubs might seem like a complicated task, but it’s actually pretty simple. You can measure the clubs yourself with a tape measure, or use a golf club measurement apparatus to determine if the clubs conform to length standards.
Where is the sole on a golf club?
The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.
Which plane should golf clubs be measured on?
Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...
How to measure a golf club?
For putters, you want to measure from the sole of the putter to the end of the grip. So, to do this, you need to follow the steps we outlie below. 1 Lay your putter flat on the ground 2 Begin with a tape measure at the top of the grip 3 Measure straight along the shaft, continuing through any offset or hosel change 4 Once you reach the bottom of the club, still going along the direction of the shaft, that is the length of your putter
How to measure golf club heel angle?
1. Lay the club flat so that the toe of the club faces directly up . 2. Make sure that the ground and middle of the club are at a 60-degree angle (club will sit this way if toe is directly up. 3. Measure from top of grip to spot where heel of club would intersect with the ground (60-degree angle coming in) Measuring these clubs has a bit more ...
How to shorten a golf club?
When you need to shorten a golf club, you can keep the same shaft by physically cutting it. This is not a complicated process, but one that requires precision. First off, the club needs the grip removed. You’ll need a new one regardless so don’t bother trying to preserve it. After that the shaft is cut and regripped.
How to know what length putter to use?
Finding the best putter length is as simple as finding what’s comfortable to you. Some people like to be straight up while putting, others prefer a bit hunched over. As long as your eyes are over the ball and the putter sits flat on the ground without the toe up in the air as you make your stroke, any length is fine.
How to measure a putter shaft?
So, to do this, you need to follow the steps we outlie below. Lay your putter flat on the ground. Begin with a tape measure at the top of the grip. Measure straight along the s haft, continuing through any offset or hosel change.
How long do golf clubs have to be?
According to the USGA, golf clubs need to be within a certain length. All clubs (minus putters) must be at least 18 inches long, and no more than 48 inches. You should not have trouble meeting the minimum length or the longest length.
What is the length of a putter?
Once you reach the bottom of the club, still going along the direction of the shaft, that is the length of your putter
How to determine the length of a golf club?
The first step in figuring out your proper club length is to start with your overall height measurement. This is the most basic method of identifying the proper club length you’d need, but by itself, does not offer enough information for an accurate determination. In the normal club fitting procedure, a player’s overall height is used, but only as part of the complete process of fitting a golfer for club length.
When is the length of the club correct?
Only when the length of the club is correct, calibrated to the golfer's height, will players be able to assume a proper stance that will allow them to make the right swing action , which will give them the best chance to have consistency in their ball striking.
Why is Fitting for Length Important?
It can lead to subconscious swing compensations that can result in inconsistent ball striking.
Why are static measurements considered a club fitting?
The two prior measurements discussed are considered “static” methods of club fitting because the measurements are performed while the player is standing still. Professional club fitters will often supplement these static measurements by incorporating an additional element into their club fitting sessions, a process that is considered “dynamic.” In a dynamic club fitting, a player will be evaluated during the course of their actual swing motion, with measurements taken at impact and by observing ball flight.
Why take length off of a shaft?
The effect of taking length off of a shaft will be to effectively increase the stiffness of its flex. How much it increases stiffness will depend on from which end of the shaft the trimming is done.
Why is wrist to floor measurement important?
The reason it is so pervasive in club fitting is because it adds an additional layer to the measurement, which improves its accuracy.
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
How to determine the correct length of golf club?
You can deduce the appropriate length for the golf club using overall height and the wrist-to-toe measurement from the table. For instance, for a golfer with a height of 6’3″ and a wrist to toe measurement of 39″, the proper club length adjustment would be ½”.
How long should a golf club be?
There is no standard measure for how long your golf clubs should be. It would be best to consider several factors such as your overall height, swing style and the distance between your wrist and toe. The above chart illustrates how you can determine the length of your golf club using the three dynamics.
What is custom measurement golf?
Custom measurement is designed to equip you with golf clubs that suit your needs and your game type. These measurements are necessary for providing the appropriate golf clubs. The steps below outline steps for you to measure and acquire custom golf clubs from a golf store.
What happens if you play a golf club too long?
Your posture will be affected. If the club is too long, you will tend to be more upright. When the club is too short, you will tend to bend forward more than you should . You should therefore pick a club that is custom made for your type of play.
Why do you need to fit a golf club?
A custom-fit golf club will improve your game and performance on the scoreboard. Therefore you should fit your golf club appropriately per your type of play. As a golfer, you should make sure that your golf clubs are fitted to the appropriate lengths.
How tall is a man?
The average height for a human being varies from man to woman. A man’s average height stands at approximately 5’10” while that of their female counterparts stands at 5’5″. With these figures in mind, manufacturers design clubs with a 1″ difference in length between men and women.
Can you measure golf club length with height?
For the measurements to be more accurate and diverse, combine the height measurement with the wrist-to-toe measurements.
Different Method to Measure the Length of Golf Club
Selecting the correct length of golf club will improve your golf game. It will help those people who are struggling to correct their swing.
Final Thought
In order to measure the golf club length is all depends on your preferences. As the standard golf club length also does not affect your physical health and improves your golf game practice with the passage of time.
How to measure length of golf club?
To find this distance, hold your club out in front of you and measure from where your fingers touch at a right angle to where the club head meets the shaft.
Why is it bad to choose a golf club with incorrect length?
Choosing a club with incorrect length or height could lead to complications on your next shot because you may have placed too much pressure on your wrists, or have hit the ball with too much force.
How long should you keep your golf clubs?
This will depend on your height. If you are under 5’4″ you should have a club length of 38 inches or shorter. For someone at least 5’4″, those with a low handicap, more than average height and strength, the club length should be 40-42 inches. A higher handicapper is likely to need as much as 44-46 inches.
Why do golfers use high loft clubs?
It is understandable why many golfers choose high lofts since they are usually more skilled and can hit down into the ball with ease, thus increasing their distance by adding extra loft onto their club. However, new or beginner players should choose clubs with lower lofts so they can get used to playing without having to think about which side of the club head’s face should face them at impact.
Why does a ball's loft lower?
As the ball travels through the air, it lowers in height because of gravity. A higher loft means a ball that will travel further before reaching its lowest point, while a low loft means less distance on the shot.
How does length help in golf?
Getting the right length can prolong your golfing career and help you hit the ball longer by improving your ball striking. Better ball striking also means more consistent carry distances.
What is the sloping scale for golf?
Most charts have a sloping scale for the height and wrist-to-floor, with player’s height on X and wrist-to-floor height on Y. These two measurements combined give the club length and a lie angle for irons to test.
What happens if the club is too long?
If the club is too long, the face tape may show heel dominant striking. If the club is too short, the face tape may show toe dominant striking. If dominant striking is found, the demo length should be changed accordingly. This is to see whether the impact location changes with the length.
What are the problems with driving a golf club?
Direction problems: When looking at the driver length, too long can lead to inconsistent ball striking or strikes towards the heel. Heel strikes encourage left-to-right curvature i.e. Fade, cut, slice or push slice. Strike problems: Ball striking can be more difficult if your club is too long.
What is the average driver length for Rickie Fowler?
Rickie Fowler is known to have used a 43.5” driver length and the Tour average build is 44.5”. Tour players main priority is hitting fairways for days, weeks and months. Shorter driver lengths make it easier to hit with the centre of the face more frequently.
What happens if you have too short of a club?
Direction problems: Too short club length can lead to strikes towards the toe or low on the face. Toe strikes encourage right-to-left curvature i.e. Draw, hook or pull hook. Strike problems: With too short club length, the most common problem is ‘Thin’ shots (hitting higher on the ball).
What can you use to wipe off golf ball?
You could use something that will wipe off like water or marker pens on the golf ball to give yourself some easy feedback on the clubface.
