Golf-FAQ.com

what is the diameter of a golf club shaft

by Prof. Rowland Bradtke I Published 2 years ago Updated 2 years ago

So here’s the general iron shaft length chart:

IRON SHAFT LENGTH for Men (steel/graphite) SHAFT LENGTH for Women (steel/graphite)
2-iron 39.5/40 inches 38.5/39 inches
3-iron 39/39.5 inches 38/38.5 inches
4-iron 38.5/39 inches 37.5/38 inches
5-iron 38/38.5 inches 37/37.5 inches
May 4 2022

Design. The shaft is roughly . 58 inch/14.7 millimeters in diameter near the grip and between 35-48 inches/89–115 cm in length. Shafts weigh between 45 and 150 grams depending on the material and length.

Full Answer

How to measure Golf Club shaft length?

How to measure the length of your driver shaft:

  • Keep the golf club in the playing position such that the center of the sole is in contact with the ground.
  • Position a 48” golf club ruler behind the golf club making sure the ruler tip touches the ground by the heel of the club. ...
  • Measure the distance from the edge of the grip cap to the heel.

How do you calculate shaft diameter?

Torque on shaft Solution

  1. Convert Input (s) to Base Unit
  2. Evaluate Formula
  3. Convert Result to Output's Unit

What is the size of a golf shaft?

What Is Standard Golf Shaft Length? The Rules of Golf for competition allow clubs to have shaft lengths up to 48 inches, but Golf Monthly notes that the average driver length on the tour is 44 inches. The average length of a driver in a golf shop is 45 inches, while the average length of a driver in a golf shop is 5 inches. 5 inches.

How to pick the right golf shaft?

Info - Choosing the Best Shaft for Your Game

  • Choosing the Best Shaft for Your Game. ...
  • Shaft Selection Primer 1.0: Single most important determining factor in shaft flex (indicator of overall strength of the player).
  • Swing Tempo - Pace of the Swing. ...
  • Release. ...
  • Trajectory - Height of Ball Flight. ...
  • Flight Direction Tendency. ...
  • Distance Control. ...
  • Price. ...

What is the diameter of a standard golf shaft?

around 0.600"The butt diameter is measured about 2" down from the top of the shaft. For standard size shafts for adult players, this will usually be around 0.600", (or larger if it's a bubble shaft).

How is golf shaft diameter measured?

To identify the shaft tip diameter of a wood, hybrid, iron or putter, insert the tip into the ta- pered slot and slide the shaft to- wards the small end until it stops and read the size. ... Once the correct tip size is identified you can use the slot to identify if the shaft is taper tip or parallel tip.More items...

What is the average shaft size?

45.5 to 46.75 inchesMost driver shafts were around 43 inches until the early 1990s. The stock standard now is anywhere from 45.5 to 46.75 inches. There are two reasons for that growth. First, driver head size has increased significantly.

What is the diameter of a golf club?

The shaft is a tapered tube made of metal (usually steel) or carbon fiber composite (referred to as graphite). The shaft is roughly 0.5 inches (13 mm) in diameter near the grip and from 34 to 48 inches (86 to 122 cm) in length. Shafts weigh from 45 to 150 grams (1.6 to 5.3 oz), depending on the material and length.

Are golf club shafts universal?

Golf shafts are generally accepted as universal, they work well with most golf club types and brands. Golf shafts have different classifications such as regular, stiff, and extra stiff.

Are all golf shafts the same?

They all have different profiles. If you are working with an experienced club fitter, it is something they should understand, as well as how each shaft's characteristics relate to your swing.

What is standard shaft length for irons?

The Complete Golf Club Length ChartGOLF CLUBLENGTH FOR MEN (steel/graphite shaft)LENGTH FOR WOMEN (steel/graphite shaft)5-iron38/38.5 inches37/37.5 inches6-iron37.5/38 inches36.5/37 inches7-iron37/37.5 inches36/36.5 inches8-iron36.5/37 inches35.5/36 inches23 more rows

How long should my golf clubs be for my height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

What height are standard golf clubs made for?

Today it is 45”, and some manufacturers have even gone to 45 1/2” as their norm. However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer's ability to hit the ball on the sweet spot of the club face.

What is the diameter of a putter shaft?

As the name implies, the shaft flares out (think of bell-bottomed pants). The inside diameter nearest the tip measures 0.382” whereas the outside diameter is in the range of 0.422”.

What is a golf shaft adapter?

Shaft adapters make it possible to get the best fit between club and shaft and also enable very slight adjustments to the performance of the assembly that can improve your performance - and they can also make it possible to switch heads.

What is the tip of golf shaft?

The Basics: What Is Shaft Tipping? Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer.

How big is a golf shaft?

Most current shafts are approx,58 inches/14,7 mm in diameter near the grip, and taper down to 0,355 or 0,370 in diameter at the tip.

What weight shafts are available for clubfitters?

Clubfitters now have the option to fit these shafts with weights from 95 to 110gm. This is a reduction from the 115 to 125gm range previously on offer. Steel generally has less flex, more stability, low torque, and provides more accuracy. Standard steel shafts are shorter.

Why is shaft length important in golf?

An increased shaft length creates a greater swing-arc, which relates to more distance. Shorter stature golfers often increase the length of the shafts and stand further away from the ball. The longer the shaft the less control and this is where fitment assists.

How many layers of fiber are in a graphite shaft?

Modern composite graphite shafts have 3 layers of fiber winding, adding substantial rigidity and performance.

What is flex in golf?

Flex. Put very simply, flex is the amount of bend in the shaft. It affects launch angle, spin, ball flight, control, carries, and distance. Shafts are qualified in different ways but reference to flex is the most important. Powerful swings require stiffer shafts which put less load on the shaft.

What is the holy grail of shaft selection?

Most golf retail outlets and driving ranges have the latest technology to measure this, and is the holy grail of shaft selection.

When did steel shafts become legal?

Finally in 1924 steel shafts were legalized and Billy Burke was the 1st to win the US Open with steel. From 1960 to 1970 the aluminum shaft was introduced but besides expensive, it broke very easily. Then followed graphite shafts, displayed at the 1970 PGA merchandise show for the first time.

What determines the correct shaft length for a golf club?

But what determines the correct golf club shaft length? Well, it depends on many factors, including your swing style, skill level, different types of golf clubs, height, and posture. To make things easier, I’ve prepared a quick club shaft length guide so you can choose the right one.

How long is a golf driver shaft?

The standard length for the drivers is 44.5 inches.

How does shaft length affect golf swing?

The golf club shaft length plays a significant role in the players’ ability to control drives and hit long. Longer shafts can generate more clubhead speed, but it does not provide you with good control. You can achieve a better swing speed and control by adjusting the shaft length suitable to your ground measurements.

What is shaft length?

Shaft length is the shaft’s raw length, which is connected between the clubhead and the grip. It acts like a lever and allows a player to hit the golf ball over a great distance by using the body’s rotation.

How to determine shaft length for irons?

The optimal shaft length in Irons can be determined by a set of measurements like arm length, player’s height, and swing posture. A tall player would not benefit by using a golf club designed for a short golfer.

What is the relation between the overall length of the club and the golf club's shaft?

The relation of the overall length of the club with the golf club’s shaft defines the length of the driver shaft. Usually, the longer the driver shaft is, the more difficult it will become for you to control the golf club and hit a golf ball squarely.

How to put a golf club on a flat surface?

Place the golf club on a flat surface with its toe pointed up.

What shafts do we use for golf clubs?

We use FM Precision, True Temper and Apollo for our steel shafts. The reasons are simple. They all make superior shafts, are long recognized as industry leaders, have very compatible steel shafts with each other and are extremely reliable. These shafts manufacturers are used by virtually every golf club manufacturer in the world today.

What are the most important parts of a golf club?

Grips are the least expensive yet one of the most important parts of a golf club. Our most important advice is — change your golf grips often. Grips tend to oxidize, harden, get slick, and lose their grip over time. It is a two edged sword — the grips with the best grip are usually the grips that lose their grip the fastest.

What is the difference between graphite shafts and steel shafts?

So, what is the logic of our advice? Well, graphite shafts reduce the weight of your club (it is actually quite remarkable to feel the weight difference in an entire set of clubs made with steel versus graphite shafts) — this is good for all players, but especially women and seniors. Graphite shafts weigh from 50 grams to 85 grams, while steel shafts generally start at 120 grams. Graphite shafts reduce the shock at impact — this is good for women, seniors, aging baby boomers and those of us with joint problems. Graphite shafts allow for longer clubs — this is good for distance (but maybe not quite so good for control). Graphite shafts have greater construction alternatives so that they can be designed to affect the flight of the ball to a greater degree than steel shafts.

What is the best material for golf club heads?

Golf club heads can be made from many materials. Zinc and Aluminum alloys are primarily used in beginners sets and putters. HST Aluminum is a much harder aluminum and is popular in very large drivers. 431 and 17-4ph stainless steel is commonly used in professional quality iron heads. You will also find 17-4 stainless steel in some wood heads.

How much does graphite weigh?

Graphite shafts weigh from 50 grams to 85 grams, while steel shafts generally start at 120 grams. Graphite shafts reduce the shock at impact — this is good for women, seniors, aging baby boomers and those of us with joint problems.

What does it mean when a golf club is made of the same material?

Generally, if a club is made from the same materials, using the same shapes, with the same weight distributions and overall weight, it should perform the same as another club similarly constructed. This is a key concept to understanding why golf club clones perform as well as the name brands — it is just molten metal shaped into a form. If the metal is the same and the shape similar, the result should compare very well.

Is graphite shaft better than steel shaft?

Graphite shafts allow for longer clubs — this is good for distance (but maybe not quite so good for control). Graphite shafts have greater construction alternatives so that they can be designed to affect the flight of the ball to a greater degree than steel shafts.

How tall is a golf club?

Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.

How to determine the correct size golf club for beginners?

The correct golf club size starts with the golfer’s height and wrist-to-floor measurement.

What factors affect the size of a golf club?

Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.

What is custom fitting golf?

Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that you can get the clubface to match up to the ball each and every time you swing. The more accurate your club sizes are, the better the chance you have of scoring and performing. Even though custom golf fittings can be expensive, most golfers find them to be very well worth the pricing.

How to adjust golf clubs?

If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them . If you don’t have the tools to do this yourself, there are typically local golf club repair shops that offer these services.

Why do manufacturers make golf tables?

Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.

What is the difference between men's and women's golf clubs?

The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.

How to determine what length golf clubs to buy?

Using your height and then your wrist to floor measurements is a great way to get an idea of what the right length of clubs will be.

What does it mean to use the correct size golf club?

When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.

Why is it important to know the size of your golf clubs?

This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.

Why is it important to choose the right golf club size?

These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.

How does the handicap index work?

The golf handicap index works by calculating your score s from previous rounds. Therefore with better shots you are more likely to achieve better scores on the golf course.

Why are golf clubs so complex?

The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.

How to make your golf swing more efficient?

To make your golf swing feel more efficient, you have to match your lie angle to your club length based on your position with regard to the club. This will help you to hit shots that feel more comfortable and it will help with more consistent swings.

What diameter is a golf club shaft?

Golf club shafts currently come in two diameters: 0.355 and 0.370. Why? There is no longer any logical reason for this and it simply makes life unnecessarily more complicated for the golf industry and consumers. Please golf industry, pick one diameter and internationally standardize on it. This is ridiculous.

What is single shaft design?

1) single length design - one single shaft is made that can be used for all irons - by varying the different tip trim amounts. 2) discrete length designs - an actual separate design for each iron. The first is cheep and inexpensive to design and produce so certainly has it's place in the industry on that basis alone.

Why do OEMs use parallel shafts?

The main reasons that some of the OEMs chose to break ranks from the 0.335 wood shafts to go with a little larger parallel tip shaft was to save money in the cost of the branded stock shafts they would buy for their clubs and to further their brand image marketing.

Why are taper shafts used?

The reason was because all the way up through the 1960s the adhesives used to secure shafts in clubheads were pretty poor in terms of shear strength. A tapered construction allowed the shaft to be "swaged" into the hosel to create a bit of a mechanical lock to help secure the shaft in the head. Once a wide range of commercial epoxies came into being in the mid 60s you could technically say there was no longer a need for the tapered shaft.

Why do clubheads have tapered shafts?

The reason was because all the way up through the 1960s the adhesives used to secure shafts in clubheads were pretty poor in terms of shear strength . A tapered construction allowed the shaft to be "swaged" into the hosel to create a bit of a mechanical lock to help secure the shaft in the head .

When were TTemper shafts invented?

As such the 0.335 wood and 0.370 parallel tip UNITIZED shafts were invented by TTemper in the early 70s to reduce the inventory SKU problems that they were subjecting their customers to. Unitized is a term that means one shaft can be trimmed to create two different flexes.

What size tip for a TM bubble shaft?

The TM bubble shafts had some abnormal tip sizes as well - .395" and .405" - but those types of outliers aren't really relevant any more. Just a trivial historic side note at best.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9