The frame is generally made of steel while tires, foam seat cushions and steering mechanisms are made of rubber, vinyl and metal. Parts like suspensions, drive trains, motors and brakes use metal. The 1993 model Club Car used an indestructible thermoplastic resin known as ArmorFlex for its body material.
Full Answer
What kind of plastic is a golf cart body made of?
The 1993 model Club Car used an indestructible thermoplastic resin known as ArmorFlex for its body material. You can opt for a three-stage process of either classic painting style or custom paint to make the golf cart body look unique.
How to paint a golf cart body?
Scrub the parts of the golf cart body that you plan to paint with fine-grit sandpaper using firm pressure and a circular motion. Remove the sandpaper dust by washing it down with water from a hose. Allow the cart to air dry or dry in the sun completely. This may take some time and you’ve to be prepared for the wait.
How do you seal a fiberglass golf cart body?
Spray the acrylic base coat on the fiberglass body. Apply three to four coats taking care to allow each coat to dry for about 20 minutes. Apply a couple of coats of a sealant or clear topcoat sealer with half an hour drying time between each coat. Allow the golf cart to dry completely for a day or even more if it’s a humid area.
How do you fix a crack on a golf cart body?
1 Clean the crack on the golf cart body with mineral spirits 2 Dry, prime and lightly sand the surface 3 Glaze the surface using a product such as Bondo 4 Alternatively, if the crack is not on the gel coat but the cart body, you will have to paint it with a resin/hardener mix.
What material is a golf cart made of?
Raw Materials The frames of golf carts are usually made out of steel plates, rods, and tubing. The bodies may be made of sheet aluminum, fiber glass, or sheet steel. Other components, usually plastic or metal, are generally purchased from outside suppliers and assembled to the vehicle.
Are Club Car golf carts plastic or fiberglass?
The Club Car DS front and rear body panels were constructed of plastic and fiberglass. In 1993, Club Car redesigned the golf cart bodies and made both the front and back panels out of a material called ArmorFlex.
What is a Club Car body made of?
The Club Car DS front and rear body panels were constructed of plastic and fiberglass, respectively. In 1993, Club Car redesigned the bodies and began constructing both the front and rear panels out of a material called ArmorFlex. ArmorFlex is thicker and stiffer than the materials used by other manufacturers.
What kind of plastic are golf cart bodies made of?
What is a Golf Cart Body made of? The body of a golf cart is primarily made of sheet steel, fiberglass or sheet aluminum. The frame is generally made of steel while tires, foam seat cushions and steering mechanisms are made of rubber, vinyl and metal.
About Us
GOLFCARTSTUFF.COM™ is located in Elkhart, Indiana. Elkhart County is the largest producer of boats and RVs in the country. Our area is known for innovation and manufacturing and as a result we are able to develop and import our own products to sell directly to the public.
Customer Service
We strive for 100% Customer Satisfaction! If you have any issues with your order or are in need of technical help just contact us!
