So here’s the general iron shaft length chart:
| IRON | SHAFT LENGTH for Men (steel/graphite) | SHAFT LENGTH for Women (steel/graphite) |
| 2-iron | 39.5/40 inches | 38.5/39 inches |
| 3-iron | 39/39.5 inches | 38/38.5 inches |
| 4-iron | 38.5/39 inches | 37.5/38 inches |
| 5-iron | 38/38.5 inches | 37/37.5 inches |
Full Answer
What is the standard length of a golf shaft?
Hybrids – standard length for a 17-degree hybrid is 40 ¾ inches, 19-degree hybrid is 40 ½ inches, 22-degree hybrid 40 inches, 25-degree hybrid 39 ¼ inches, and 28-degree hybrid is 39 inches. Irons – Club length of irons varies and as the loft increases, the shaft length decreases. This is to increase accuracy and stability to the shorter irons.
What is the standard size of golf clubs?
Based on the average wrist-to-floor measurement and overall height, the standard length of golf clubs is anywhere between 34 and 35.5 inches. Properly Sized Golf Clubs – What Are the BENEFITS?
What is the difference between men’s and Ladies driver shaft length?
And now, it has been increased to 45 inches for men (although the range is between 45 and 45.75 inches). While the shaft length for ladies drivers is 44 inches. However, I would like to share my honest opinion here. The driver shaft length, even though important, is not the only determinant.
What are the best golf clubs for short golfers?
The Deep Red Tour Complete set is aimed at intermediate golfers. Since it is designated as a set for junior golfers, shorter golfers will benefit tremendously from the shorter clubs. If you measure between 5 feet 3 inches and 5 feet 8 inches, the length is perfect for you. It is available in a range of color combinations such as:
Do short men need shorter golf clubs?
A standard length golf club should fit a golfer that is about 5'6″ to 6'0″. The ideal height to be is 5'8″ if you want standard equipment. For shorter golfers, you need to prepare to take about a ½ inch to an inch off the club to make sure that they are a proper fit.
How long should my golf shaft be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
Is there a minimum length for golf clubs?
Length. The overall length of the club must be at least 18 inches (0.457m) and, except for putters, must not exceed 48 inches (1.219m). For woods and irons, the measurement of length is taken when the club is lying on a horizontal plane and the sole is set against a 60 degree plane as shown in Fig.
Do shorter players need shorter clubs?
Golfers who are shorter than 5'7” and tend to have a shorter wrist-to-floor length likely need to shorten their irons. The decision to shorten golf irons typically comes down to the height of the player.
What shaft length should I use?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
What club length is for me?
For example, for a golfer that stands 6'2” and has a wrist-to-floor of 39”, the recommendation for proper club length would be 1/2” longer than standard length.
Can you use shorter golf clubs?
Golf clubs are often sold in a “standard” length, which is relative to each club. However, golfers differ in height and arm length, so sometimes the length of a club must be adjusted. Not only can golf clubs be lengthened for people who need it, but they can also be shortened.
What is the standard shaft length for irons?
With steel shafts, the standard length of a 5 iron golf club is 37.5 inches. With a graphite shaft, the standard length for men is 38 inches and for women, it stands at 37.25 inches. A 5 iron golf club usually offers a 28-degree loft angle.
Are my clubs too short for me?
How Do You Know If Your Golf Clubs Are Too Short? The most common way to tell if your clubs are too short is that your back will be bent over too much, the heel of your club will be off the ground at address, and you'll often make contact towards the heel of the club.
What happens when you shorten a golf shaft?
The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club.
What height are junior golf clubs for?
The general rule is that until they are 60 inches tall, they'll be fine with a set of junior clubs from a good manufacturer. After they reach 5 feet, experienced junior players really benefit from having each club fit for their game. The weight of the golf club is also very important to junior golfers.
What does it mean to use the correct size golf club?
When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.
Why is it important to choose the right golf club size?
These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.
Why is it important to know the size of your golf clubs?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.
Why are golf clubs so complex?
The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.
Who invented single length irons?
Single-length irons were introduced by Bryson Dechambeau and that has changed the way that people think of golf club sizes. A recommendation made by Bryson is that your entire iron range should be the same length as your 7 iron.
How to make your golf swing more efficient?
To make your golf swing feel more efficient, you have to match your lie angle to your club length based on your position with regard to the club. This will help you to hit shots that feel more comfortable and it will help with more consistent swings.
Golf Club Size guidelines
To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor.Measure from the floor to the end of the Grip.
Golf Club Size by Length Based Chart
However, the following height chart measurement may help you get an idea about measuring the length of your wrist to the floor (WTF). It will help you determine your club length.
Signs Your Clubs are Too Long
Below you’ll find common signs that indicate the clubs you’re using are too long:
Signs Your Clubs are Too Short
Below you’ll find common issues that can occur if you’re golfing with clubs that are too short:
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
Why is my driver heavier than my wedge?
That’s because the head is a little heavier to account for the extra force it takes to send your ball as far as it goes. During your driver shot, you should send the ball farther than any other point in your round of golf.
Does golf club length matter?
Golf club length matters a ton. If you’re holding proper form, where your back and arms are straight and your core is engaged when you swing, then you’re doing all that you can on that front. When you swing the club, it’s supposed to effortlessly collide with the ball and send it flying.
What is the shaft of a golf club?
Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job.
How long is a 0.370" iron shaft?
decreasing in length from #3-PW). 0.370" parallel iron shafts arrive in uncut lengths, usually 41" or 42" for irons or 46" or more for woods.
What is shaft flex?
Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), ...
What's the Standard Driver Length
The standard driver length for men's clubs is 45.5" to 45.75" inches long. Because women tend to be shorter than men, the standard women's driver length is usually closer to 44".
What Length Driver Do the Best Club Fitters Recommend for Most Golfers?
In our experience getting fitted and what we've gathered talking to and researching what club fitters have to say about driver length, most of the best club fitters recommend drivers very close to the standard length for most golfers.
How Long Are PGA Tour Professionals' Drivers?
PGA Tour Professionals tend to play drivers between 44-46" in length. The vast majority of pros are in the 44.5" to 45.75" range from what we've been able to gather.
How Long Should Your Driver Be?
As we mentioned at the start of this article, the best driver for you has the optimal balance of distance and accuracy.
Don't Cut Down a Driver Without Making Weight Adjustments
Many golfers wanting to try a shorter driver think they can simply have their shaft cut down, but this is not the case if you want it to feel anything like a normal driver.
Making a Case for a Driver and "2-Wood" In Your Bag
It's starting to become popular having both a Driver and a "2-wood" in the bag.
Final Thoughts
We've covered a lot in this guide, but ultimately it's on you to test out different clubs and find out what's right for you.
Why is my golf club not the right length?
Clubs that are not the right length will cause too much of the heel or the toe touching the turf at impact. The lie of the club on the turf is impacted by the height of your hands. A longer club will push your hands further upright and thus change the lie. Lie variations from the standard for standard length shafts:
How to measure golf clubs?
To measure the length of your clubs, you need a flat surface to place the clubhead on, and a 48-inch straight edge aluminum ruler. The 48-inch ruler is in line with the maximum length specified by PGA and R&A rules. It is not advisable to use a flimsy and flexible measuring device.
How long is a 9 iron?
The general length of a 9-iron is 36 inches. Wedges – Pitching wedges and gap wedges are typically 35 ¾ inches while a sand wedge and lob wedge generally measure 35 ¼ inches. Putter – the standard length for putters is 34 inches. In this video, TruGolf Academy goes into some detail on the subject of shaft lengths.
Why are taller golfers better than short golfers?
Taller and stronger golfers have an advantage over short golfers as they can create a wider arc thus resulting in more swing and ball speed that equates to more distance. By no way does that mean that short golfers cannot hit the ball a long distance with a good swing and the right equipment. In this article, we will look at ...
How long should a golf club be for a woman?
However, most standard clubs will fit men around 5 feet 9 inches and women around 5 feet 7 inches. The market for average golfers consists of approximately 80% of the total golf market.
How long is a graphite shaft?
The standard length of a graphite shaft is typically ½ inch longer than a steel shaft. Women’s clubs are typically one-inch shorter than men’s clubs and therefore could quite easily be used by shorter men. Drivers – the standard length found on drivers is around 45 inches but can be a maximum length of 48 inches.
Is golf challenging for short golfers?
Golf is challenging enough without having to compete with taller golfers that have a distinct advantage in the distance department. Fortunately, there are golf equipment manufacturers that have come to the rescue for short golfers offering well-balanced sets to enable you to get maximum enjoyment out of the game.