The spine is the part of the shaft that is more resistant to bending than any other part. A spine exists in all shafts; regardless of the material they are made from (steel, titanium, graphite, etc.) and regardless of the manufacturing process.
What is a spine in golf shafts?
A Spine should be visualized as a backbone or ridge in the golf shaft, running down its length, more resistant to bending than any other part of the shaft.
Do steel shafts have spines?
Just like graphite shafts, steel shafts also have spines. Being heavier, it is sometimes trickier to find the spine of a steel shaft but they are there and you can use the same method as described above to find it. This is an interesting one, especially with the modern adjustable drivers we now see everyone use.
Can I get my shafts spine-aligned/balanced in my set?
Can I get my shafts spine-aligned/balanced in my set that I already play with?: YES! I can take your clubs apart, clean them and prep them for re-assembly.
Why do you need to find a shaft's spine?
Golf shafts have the same characteristics and will want to flex naturally on their spines! (or really at their point of inconsistencies in wall thickness, straightness, roundness and material). So ultimately we want to find a shaft's spine so that we know exactly where the shaft is going to flex naturally!
What is the spine of a golf shaft?
A golf shaft is said to have a 'spine' if it is inconsistent in its stiffness when bending in different directions. Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining.
How do you find the spine on a steel shaft?
1:413:31How to Find the Spine of a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen you want to mark at the top of the shaft for each time that. It. You feel it click into place.MoreThen you want to mark at the top of the shaft for each time that. It. You feel it click into place. And you'll see each time I do this. It's going to pop into the same. Place.
Do steel shafts have a spine?
Just like graphite shafts, steel shafts also have spines.
Where should the spine be on a golf shaft?
The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o'clock or 9 o'clock position – also called the neutral position.)
What is spine alignment?
When your spine is in alignment, it means that the vertebrae are stacked vertically, This keeps the body, from the head to the feet, in a reasonably straight position. An aligned spine not only gives you good posture, but also helps prevent pain, stiffness, and related issues.
What is shaft spine alignment?
The simple and easy way to explain Spine Aligning is finding the natural bending position of the golf shaft, which is the least point of resistance. By Spine Aligning your shaft the clubface will open and close when you want it to, not when the shaft wants it to.
Is spine alignment necessary?
Having proper alignment goes beyond maintaining a good posture — it can also help prevent long-term pain. Misalignment may impair your range of motion, and severe issues can affect your quality of life. There may be signs that your spine is misaligned, along with pain around several joints in the body.
How do you pure a golf shaft at home?
How to Pure a Golf ShaftClamp the grip end of the club in a vise. ... Test the alignment of the spine. ... Tape a strip of masking tape around the shaft just above the club head. ... Remove the club head and grip from the shaft.Find the dominant spine of the shaft with a spine finder. ... Fit the club head and grip to the shaft.More items...
How do you align the spine of an arrow?
0:518:21Tech Tuesday | Spine Alignment | Victory Archery - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe the paradox of arrow is going to be vertical. So you want that spine alignment mark to be at theMoreThe the paradox of arrow is going to be vertical. So you want that spine alignment mark to be at the 12 o'clock. Or six o'clock. Position i prefer the 12 o'clock because the graphic sits up.
How do you make a spine Finder?
0:002:28How to Make a Shaft Spine Finder - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm just some technical director for a really good ball today I'm going to show you how to make aMoreI'm just some technical director for a really good ball today I'm going to show you how to make a homemade spine finding. Device. First thing we want to do is start out with some PVC tubing.
How do you pure iron shafts?
0:284:52Golf Shaft PUREing - Does It Actually Help? PURE vs Non PUREYouTubeStart of suggested clipEnd of suggested clipIt. Like they don't do any special procedure to the shaft they just spin the shaft.MoreIt. Like they don't do any special procedure to the shaft they just spin the shaft.
What is shaft Pureing?
You may have heard golfers say something like, “my shafts are pured.” To have a shaft that's “pured” is just another way of saying that the shaft has gone through an SST Pure analysis to ensure it's in the most beneficial orientation for consistent performance when attached to a club head.
What is the spine orientation in golf?
Golf Shaft Spine Orientation. There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation. The swing plane means that the spine is perpendicular to ...
Why do you need to spine align your shafts?
It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion. This process can also help improve the feel of your clubs during the swing. These all seem like outcomes most golfers would want to have in their bag.
What is swing plane?
The swing plane means that the spine is perpendicular to the clubface and the droop plane is parallel with the clubface. This is a piece of advanced club builder knowledge that can make a difference to the feel and performance of your clubs.
What is pure shaft positioning?
PUREing is probably the most famous method of optimising shaft positioning and it was invented by a company called SST (Strategic Shaft Technologies). PURE stands for P lane of U niform RE peatability. This is a proprietary process that they claim is accurate to one degree.
What is a vice in golf?
A vice holds the grip-end of the club so that you can test the club. Although it important to point out here that this should be done without a grip on the club. From there you need to find the balance point that gives the club perfect oscillation, then you need to mark the shaft.
Do graphite shafts have spines?
Yes, they do. Graphite shafts have come a very long way in a short period of time thanks to new manufacturing methods and materials. Graphite shafts actually have two spines, creative called “S1 and S2” by the industry. These are the two stiffest oscillation points.
Is golf a hard sport?
Golf is a hard sport to play and many things are uncontrollable during a round. A gust of wind, a bad bounce or other bad breaks are out-with your control.
What is a spine?
The spine is the part of the shaft that is more resistant to bending than any other part.
What can be done?
I start by finding the shafts spine, once found, I align and install the shaft into the club head so the spine works with your swing and not against it.
An added benefit
On a graphite shaft the normal position for the shafts spine is face up, this gives the shaft optimum resistance to shaft drop. (For info on shaft droop read up on the effect of shaft flex and club length on lie angles on the loft and lie page)
Some history
In February 1999 the golf’s governing bodies modified the rule on golf shafts that required all shafts to “bend symmetrically in all directions”, they decided it was no longer against the rules to orientate the shaft in the club head, as long as the shaft imitated the effect of bending symmetrically (you are not allowed to orientate the shaft to make a club that produces a draw or fade)..
Shaft orientation also know as spining, puring, or optimizing USGA Ruling
Because of a change in the interpretation of a USGA rule. Rule 4-1b states: b. SHAFT The shaft shall be generally straight, with the same bending and twisting properties in any direction Appendix II 4-1b states, BENDING AND TWISTING PROPERTIES.
Some science
An independent study on spine alignment was undertaken by Golf Science Consultants Inc, performed by J.
What Others Say
Tom Stine, PGA Tour Partners Magazine. September/October 2002: “The bottom line is that if the spines are not set in the club heads at the proper angle in relation to the clubface, we are not getting the most out of our golf clubs and we will continue to have golf clubs that will perform differently than others.
Stuy Pegleg
My first foray into getting my shaft's spine aligned. So if at address, the 12 o'clock position is away from the body and the 9 o'clock position is down range, in the direction the struck ball travels, which one is best?
prestiege
technically the spine should go at 12, the reason you get better osilation that way is because the NBP is what should go to 9, i confused the 2 at first and im sure many do before they read into everything, normally the spine is roughly 90 degrees from the NBP which the NBP is what is found in a ball bearing based spine finder, they should change the name to NBP finder and it would address a lot of the confusion. that stated, flat line osilation would technically be best posistion to set the shaft too..
Stuy Pegleg
Ok, that is making some more sense. I've been reading this and that on the internet and got confused with my haphazard reading.
stage1350
Spine is the beginning. I actually locate the NBP in line with the face (9 o'clock for righties) as it seems to provide maximum stability. Then I tweak it a few degrees either way to achieve a FLO.
puttng4birdy
My first foray into getting my shaft's spine aligned. So if at address, the 12 o'clock position is away from the body and the 9 o'clock position is down range, in the direction the struck ball travels, which one is best?
marrigo
Related question. How precise does the of the alignment of the spine or flow point need to be to wherever you choose to install it. For example if you are installing it at 12 o'clock how many degrees off can you be before you defeat the purpose of spine aligning? 1 degree, 5?, 10?
Libertygoat
My first foray into getting my shaft's spine aligned. So if at address, the 12 o'clock position is away from the body and the 9 o'clock position is down range, in the direction the struck ball travels, which one is best?
