What is true spec Golf?
So first off, let’s back up, what exactly is True Spec? True Spec Golf is a brand agnostic, boutique club fitter. This means that it doesn’t matter to them what clubs you buy, they want to fit you for the very best clubs for you. They have literally tens of thousands of combinations of clubs and shafts available to you.
Is true spec the right fit for You?
If cost is an overwhelming factor for you, then this won’t be the right option for you either. True Spec isn’t cheap. Just the fitting itself goes for around $350. But when you factor in retail prices for clubs, after market shafts, the Pure process – it gets expensive quickly.
Is truespec a good place to get your clubs fitted?
I did a fitting at a local TrueSpec here in Boston. The fitter was knowledgeable, and very comfortable to work with. The only knock was that the cost for clubs directly from them was certainly steep. Though they do not force you to buy clubs from them, the fitting fee was it's own price.
Why choose true spec fittings?
If you do this same fitting at True Spec, you’ll have more options. Not only will you make sure you’re getting the correct length, the right shaft for you, and the correct shaft alignment through the Pure process – but you’ve got an insurance policy. You might spend $500-1,000 more on the whole process than you would buying them off the rack.
What does irons 6 SW mean?
Sand WedgeMid-irons are numbers 5, 6 and 7 and short irons are numbers 8, 9 and wedges such as a Pitching Wedge (PW), Gap or Attack wedge (GW or AW) and a Sand Wedge (SW)
What does S and P mean on golf clubs?
Drivers are available in a variety of lofts. Wedges typically don't have numbers. Instead that have letters such as P or PW for pitching wedge and S for sand wedge. The sand wedge, gap wedge and lob wedge might also be identified by the degrees of loft.
What do the letters mean on golf clubs?
Again, breaking it down to its simplest form, the numbers on your golf clubs relate to how far they hit the ball - the lower the number, the further the ball should travel. A club with a #4 on it will hit the ball further than one with a #9 on it.
What are the yardages for irons?
IRONS2-iron = 105 to 210 yards.3-iron = 100 to 205 yards.4-iron = 90 to 190 yards.5-iron = 80 to 175 yards.6-iron = 70 to 165 yards.7-iron = 65 to 155 yards.8-iron = 60 to 145 yards.9-iron = 55 to 135 yards.
What does H mean on a golf club?
Hybrid golf clubs help fill in the gap between your harder-to-hit irons and fairway woods. They are designed for distance, trajectory, control and playability, combining features from irons and fairway woods. They could even replace a fairway wood or iron in your bag.
Can you use a 60 degree wedge as a sand wedge?
Can you use a 60-degree wedge as a sand wedge? A 60-degree wedge can work well out of the sand but it's important to have at least 10 degrees of loft. A wedge with more loft can help you get the ball out of deep bunkers or fly a shorter distance.
What does W mean on a golf club?
The term "pitching wedge" is now used by virtually all manufacturers and players to describe this club; Karsten Manufacturing (maker of the PING brand) simply labels their pitching wedges "W" for "wedge".
What is flex S on a golf shaft?
"R" denotes "regular flex" "S" denotes "stiff flex" (might also be designated "Firm") "X" denotes "extra stiff flex" (might also be designated "Tour")
What is R3 flex shaft?
The name R3 takes out the sex of the individual in the fitting equation and instead relates it the player's swing speed much the same way that ladies grips are now referred to as undersized. The R3 flex is the gender neutral term for those with the lowest swing speeds.
What should my stock yardages be?
Using the yardage chart examples below, you will be able to understand more about your swing and the distances you hit your clubs....Distance Chart for Female Golfers.ClubWomen's Average DistanceLPGA Tour Average3-wood180 yards228 yards5-wood170 yards216 yardsHybrid170 yards211 yards2-iron165 yards206 yards12 more rows
How far should a 65 year old man hit a golf ball?
As you get older, your swing speed normally decreases. That being said, there are still older golfers who have incredibly high swing speeds. If you're able to drive the ball somewhere close to 220 yards, you're pretty much average. I'd say anything lower than 210 yards and you're less than average.
How far should a senior hit 7 iron?
The average distance golfers hit each club varies widely. A PGA Tour player hits a 7-iron between 172-215 yards.
What does 5 PW irons mean?
pitching wedgeWhen shopping GlobalGolf.com, we refer to the different club makeups with abbreviations such as 3-PW (which would contain every iron from the 3-iron through the 9-iron as well as a pitching wedge) or 5-PW, AW, SW (which would contain every iron from the 5-iron through the 9-iron as well as a pitching wedge, approach ...
Whats the difference between a sand wedge and a pitching wedge?
The most significant difference you'll find between a pitching wedge and a sand wedge is the lie angle. As previously noted, pitching wedges usually lie between 45 and 50 degrees. A sand wedge will have a loft of 54 to 58 degrees, with the majority falling around 56 degrees.
What are the letters for wedges?
All Those Wedges Wedges and their names and purposes by Mark Blakemore, PGA ProfessionalNameAbbreviationCommon loft and/or descriptionLob WedgeL, LW59-60, some as high as 65M WedgeM50-60, stands for "muscle" as in muscle-backM/B wedgeM/B56, stands for mid-bouncePitching WedgeP, PW, W47-507 more rows
What is the difference between 1 wood and driver?
Yes, a driver and a 1-wood are the same golf club. Today, it is uncommon for golfers to refer to their driver as their 1-wood; go back far enough in golf history, however, and it was a much more common thing. As an example of that fact, consider Craig Wood.
What is the difference between a True Spec fitting and a conventional fitting?
With a True Spec fitting, only original shafts are used, which are independent of the club series. The selection is also much larger. We have around 240 different iron shafts and all the current heads from the major manufacturers such as Callaway, Cobra, Taylormade, Srixon, Cleveland, Titleist and many more.
Are there any costs for a fitting?
Yes, due to the large selection (50,000€ value of test clubs and shafts) there is a standard fitting fee. Prices on request.
How many studios does True Spec have?
True Spec has over 20 studios worldwide. To see a complete list, head to our Locations page.
Can poor fit clubs be harmful?
Absolutely not! Poorly fit clubs can undermine the most effective teachers and lesson curriculum which can lead to false feedback about performance. It can also cause teachers and students to make decisions which need not be made.
Do you have to purchase anything after fitting?
Nope. Customers are never obligated to purchase anything as a result of their fitting. We provide the recommended specifications to every customer once their fitting is complete and it is up to the customer to decide whether or not they wish to make any purchases.
What was most impressive to you about Club Champion and their setup?
Deegan: I was just impressed with the overall approach from start to finish. I was sent an email questionnaire before my fitting, so Westover could learn what my goals and expectations were. It was essentially an icebreaker, since he says most golfers show up nervous. This way, he's ready for a conversation about your game before you start swinging.
What was your biggest technical takeaway from your driver fitting?
Deegan: Two things: First, I'm amazed at how much a single change in shaft could affect the ball's performance so dramatically. My fitter and master builder, store manager Derek Westover, would know within two to three swings if the shaft wasn't right for me, and quickly yank it out of the rotation.
What is Club Conex?
A big part of their “secret sauce,” not just for southpaws like myself but for all golfers who come their way, is Club Conex, a technology they own that enables them to swap out shafts and heads in all clubs instantaneously.
Where did Jason and Tim go to golf?
Jason visited a Club Champion location in San Francisco, while Tim went to True Spec Golf’s flagship Miami location. Afterwards, the two compared their experiences. Senior Writer Tim Gavrich: Jason, I’d venture to say it’s been a pretty good last couple weeks for us in the golf equipment geek-out department.
What is true spec golf?
True Spec Golf is a growing company that specializes in custom club fitting in 15 locations across the US, Europe, and Asia. Committed in providing their clients 100 percent satisfaction with their fitting experience, True Spec Golf has been earning a ton of positive buzz in recent months. I paid a visit to their new Chicago area studio to get a first-hand look at their services. I left my visit with a new understanding of my game and a new favorite golf service.
Why is True Spec Golf important?
Why is this important? Simple: True Spec Golf wants to make sure you totally understand your game from start to finish. Having them explain exactly what they wanted to adjust and why they were focusing on one variable to the next was exceptionally impressive.
What shaft is Callaway Epic?
I learned that my current driver -- the Callaway Epic with a 50g Diamana shaft -- had a swing weight just under D1 while my irons came in at D4. That's a substantial jump in swing weight from one club type to the next and was likely contributing to my biggest swing flaw: a deadly snap hook.
What is club fitting?
Club fitting should be a collaboration between the client and the fitter. It should also be an educational opportunity for the client to take knowledge with him or her outside the studio. True Spec Golf clearly understands this dynamic and sets an example competitors would be wise to emulate.
How many different clubheads did Scott and Michael hit?
After spending over an hour with Scott and Michael, and hitting nearly 20 different clubhead and shaft combinations, we finally found a winner.
Who took baseline measurements of swing weights, lengths, lie angles and shaft frequencies of my irons and driver?
While Scott showed me around the studio, Michael took baseline measurements of the swing weights, lengths, lie angles and shaft frequencies of my irons and driver. This was a good starting point to let him know what I'm accustomed to and gave him an idea of what to adjust as I started hitting shots.
Does True Spec Golf have biomechanics?
That's right: in addition to their custom fitting service, True Spec Golf also offers full biomechanic analysis capabilities to educate you on why your golf shots behave the way they do.
Kball10
Is the fitting worth it? No. Is it worth the money? No. However, you may find value in the fitting process and club build. These types of companies have lots of combinatio
Feelingofgreatness
You would get way better value with a TLT fit. The key, in my opinion, is getting your lengths and lies correctly done first, before exploring clubs.
third-times-a-charm
Fittings are good to get approximate numbers on your current swing and ability, but that's it.
noodle3872
I got fit at Modern Golf. The outcome was bang on what I had in the bag for iron shaft but with the newest model of iron head. Lie angle recommendation was 62.5° for 7i and D2 swingweight. I took the sheet and called Ben at The Tour Van to make the purchase. Ben’s work is impeccable.
Hougz79
I had my P770s reshafted at CC. I generally know my swing and I had a specific goal, to lower ball flight as much as possible (I am a high ball hitter). I noticed my stock 770s seemed “inconsistent”. When they spec’d them they were C9/D0, far lighter than I play. That was a valuable insight. I know any fitter could do that. Overall I am satisfied.
Kball10
You would get way better value with a TLT fit. The key, in my opinion, is getting your lengths and lies correctly done first, before exploring clubs.
Wardonation
I got fit at Modern Golf. The outcome was bang on what I had in the bag for iron shaft but with the newest model of iron head. Lie angle recommendation was 62.5° for 7i and D2 swingweight. I took the sheet and called Ben at The Tour Van to make the purchase. Ben’s work is impeccable.
How much does Club Champion charge for driver fitting?
Posted December 8, 2020 (edited) Club Champion does a thorough fitting and their customer service is excellent. It comes at a steep price of 150 for driver fitting. They also charge full retail for their fitted clubs.
Is Club Champion a thorough product?
I wouldn't call Club Champion thorough. Perhaps it's location specific. The best thing that Club Champion has going for it is the selection. But if you want to go in depth about swing weight and shaft profiles, etc., then I'd go somewhere else. If you already know what you like and are looking to try certain products that fit that mold, then Club Champion would be just fine.
Is Club Champion fitting good?
I did a fitting at Club Champion. I think it really depends on the specific fitter. One I had was ok, one was really good. The selection is definitely very good. It might be worthwhile to get the specs then order else where. For example, the last fitting I did was at Dallas Golf and the clubs were at least 15% less costly than what CC would have been.
Does Club Champion give fittings?
Club Champion will likely give you a pretty good fitting - although I'm sure you know, it'll be costly.
Is Golftec a franchise?
Club Champion will likely give you a pretty good fitting - although I'm sure you know, it'll be costly. Golftec locations are franchises. And their primary business is lesson packages. T
Where is Matt from Plugged In Golf?
He's worked in nearly every job in the golf industry from club fitting to instruction to writing and speaking. Matt lives in the northwest suburbs of Chicago with his wife and two daughters.
How many shafts does Chicago have?
To highlight another important difference, True Spec Golf, Chicago has access to over 60 driver shafts where most OEM fittings are limited to three or four for a driver. It’s also noteworthy that True Spec Golf, Chicago was able to let me test drivers with my preferred grip size.
