Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
How do you tip a golf shaft?
Sep 04, 2019 · While practically every golf club fitting guru and gearhead knows what it means to “tip” a clubshaft, most golfers don’t know what it is or what kind of effect it can have on how a club performs....
What are the best golf shafts?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as …
How to fit a golf shaft?
Jun 29, 2020 · What Is Tipping A Golf Shaft? Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer . If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
How to pull a golf shaft?
In this golf shaft design you can see the shaft stiffness turn upward from 11″ toward the tip. The tipped shaft cuts away this stiffness and results in a softer tip than the original design. One golf instructor looked at this illustration and commented that on this shaft tipping would move the soft section closer to the tip creating higher launch and spin.
Does tipping a shaft reduce spin?
What is tip stiffness in a golf shaft?
What is a soft tip shaft?
What happens if my shaft is too stiff?
What is shaft tipping?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft’s resistance to twisting. On the other end of the shaft is the handle, ...
Why is tipping so complicated?
The reason tipping is so complicated is first and foremost the way most golf shafts are made. As we describe in this article, nearly all golf shafts on the market are made by hand with a decades-old process known as the Roll-Wrapping Method. Because these shafts are made by hand, it’s impossible for even two shafts that are supposed ...
How are golf shafts made?
As we describe in this article, nearly all golf shafts on the market are made by hand with a decades-old process known as the Roll-Wrapping Method. Because these shafts are made by hand, it’s impossible for even two shafts that are supposed to be identical to feel or perform the same. Some tour players are known to test multiple versions ...
Where does Matt live?
He's worked in nearly every job in the golf industry from club fitting to instruction to writing and speaking. Matt lives in the northwest suburbs of Chicago with his wife and two daughters.
Who is Matt Saternus?
Matt Saternus. Matt is the Founder and Editor in Chief of Plugged In Golf. He's worked in nearly every job in the golf industry from club fitting to instruction to writing and speaking. Matt lives in the northwest suburbs of Chicago with his wife and two daughters.
What are the advantages and disadvantages of tipping?
Benefits And Disadvantages Of Tipping 1 Allows for more control with the club. 2 Minimizes the twisting of the club. 3 Helps alter ball launch and flight.
Who is Lawrence Smelser?
Lawrence Smelser is part of the Golfible editorial staff and is a freelance golf writer. Smelser has covered the PGA Tour and most recently the 2019 Masters. He holds a journalism Bachelor's degree from Texas A&M and a Master’s journalism degree from the University of North Texas
What does it mean to tip a shaft?
“Tipping” a shaft refers to cutting it from the tip end (where the club head goes) prior to installing the head. It’s done with the intention of making the shaft feel and perform as if it were stiffer.
Where is Matt from Golf?
Matt is a golf instructor, club fitter, and writer living in the northwest suburbs of Chicago. Matt's work has been published in Mulligan Magazine, Chicagoland Golf, South Florida Golf, and other golf media outlets. He's also been a featured speaker in the Online Golf Summit and is a member of Ultimate Golf Advantage's Faculty of Experts.
What is a golf shaft?
Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job. So when choosing a shaft, it's important to know what specifications to look for. The golf club head and golf grip will each have their own specifications/measurements as well, and having all this information on hand can guide you to choose the right shaft, as well as ensure the club assembly process goes smoothly. Here are 5 golf shaft specifications you'll want to know:
What is the shaft of a golf club?
Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job.
What is shaft flex?
Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), ...
What Is Tipping and Why Would You Do It?
The Myths
- Myth #1 – Tipping a shaft changes the feel Myth #2 – Tipping a shaft will reduce spin Myth #3 – Tipping a shaft will reduce launch angle Myth #4 – Tipping a shaft will improve accuracy
How We Tested
- For this test, we brought together five golfers with handicaps ranging from 10 to +3. Each player hit five drives with each of three shafts. One shaft was untipped, one was tipped 1/2″, and one was tipped 1″. The shaft used was the Nippon Regio Formula B. Each shaft was built to the same finished length and swing weight. All testing was done at and with the help of Club Champion
The Results
- Tipping a shaft unequivocally changes the feel. All five of our testers noticed a difference, though some were more sensitive to it than others. Despite not knowing which shaft they were testing, each one identified the feel as you would expect: the untipped version felt the softest, the 1″ tipping felt the stiffest. If you like the shaft you’re playing but want a stiffer feeling, tipping it sho…
Conclusion
- If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.