Golf-FAQ.com

what is wrong with trial and error golf club fitting if i get it right

by Wava Krajcik IV Published 2 years ago Updated 2 years ago

The reason is because a very high level of their inconsistency comes from their inability to control clubs that are too long, too low lofted, too heavy, or too light. Often times, their set makeup is also improper, which magnifies many of the swing mistakes they make. Don’t get me wrong – an accurate club fitting does not CURE swing mistakes.

Full Answer

Do club fittings affect where a ball strikes?

This is as basic as club fitting gets, and it is only one piece of the puzzle. The other thing that may impact where a ball strikes the face would be the predominant face-angle tendency at impact.

How do you address the handle error on a golf club?

We can address this handle error by adjusting the lie angle of the club. Shaft droop is the amount the tip section of the shaft bends down at impact in relation to the handle section of the shaft. The more a shaft droops, the more a player will dig the toe of the club.

What is golf club fitting?

In short, club fitting is the process of determining which golf club allows a player to: Consistently strike a ball closest to the center of the face, with Clubface that squares to the target line with the sole of the club flush to the ground, that Optimizes a player’s performance, feel and consistency, while

How does a golf club’s length affect your game?

A club’s length can have direct bearing over where a player tends to impact the face. A player that is striking shots low on the face and on the toe can usually benefit from a club that is slightly longer, while a player striking shots too high on the face and on the heel would typically benefit from a club that is shorter.

Does golf club fitting really make a difference?

Is it worth getting my golf clubs fitted? Yes, it is absolutely worth getting your golf clubs fitted. A professional fitter will assess your swing speed, launch angle and lie angle at impact and then give you clubs that will produce the optimal flight numbers for your customised swing characteristics.

What happens when your golf shaft is too flexible?

If the shaft is too flexible, you will have a 'whippy' feeling in your hands, and you won't be able to feel the clubhead on the downswing. When the golf ball is struck it will generally have too much spin if the shaft is too flexible, this will cause a 'ballooning' effect on the shot and it will tend to go quite high.

Will club fitting lower score?

Every player felt that fitted clubs would lead to lower scores. It could take up to a dozen rounds to see the full scoring benefits when playing with an all-new fitted set, say our experts. 7. HIGHER-HANDICAPPERS SAW BIG GAINS.

How much should I pay for a club fitting?

The average golf club fitting cost will run you between $100 and $200. That fee is just for the fitting professional to analyze your current setup and suggest the best path forward. An example of an affordable club fitting option is GolfTec who charges $125 on average for a fitting.

Do any pros use regular flex shafts?

None of the top 100 PGA Tour pros uses regular iron shafts. It is only among the wedge shafts selected by the pros that you finally see the majority of them using slightly 'softer' flex shafts but as we can see below a healthy number still continue to choose extra stiff shafts in their wedges.

How far should you hit a 7 iron?

Average 7 Iron Distances are following: Beginning golfers- 100 yards (men) or 60 yards (women) Intermediate golfers- 135 yards (men) and 75 yards (women) Advanced golfers- 165 yards (men) or 140 yards (women)

Should a high handicapper get fitted?

Whether you're a high handicapper looking to hit more consistent shots, or whether you're a tour player looking to refine and build confidence, fitting is measurably beneficial.

What percentage of golfers get fitted?

More astounding, 51% of you have been fitted this season alone. Just a bit more than 25% of you have been fitted just once. Roughly the same percentage has been fitted twice. 15% of respondents have been fitted six or more times.

How long after fitting are clubs?

Q: How long does it take for my clubs to come in after the fitting? A: Typical lead time is approximately two weeks, from the date of the fitting and purchase. Some companies run a little quicker due to their location, custom turnaround time, etc.

How much does a fitted set of golf clubs cost?

On average, the cost to get your golf clubs fitted is $100 for each type of club or $275 for your entire bag. This cost covers the basics such as club loft, lie, weight, and also finding the right shaft for your game. Certain shops offer free club fitting but that normally is much more basic.

How much is a decent set of golf clubs?

The Costs of Complete Sets of Golf Clubs Complete sets or packages of golf clubs aimed at the average golfer can range anywhere from around $100 to $1,200 (less than £100 to around the £1,000 mark).

Can you fit clubs after you buy them?

And the answer is absolutely yes, it's worth getting fit for clubs you already have. Especially if you're 5-foot-5, since a stock set of clubs isn't likely to have the proper lie angle for you. Luckily, if that's the case, it's not a difficult fix.

What is wrong with flex in golf clubs?

The most common place golfers go wrong is in the amount of flex the they have in their golf club’s shaft. Many factors go in to how much flex your club should have, such as your swing speed, angle of release, and focus on achieving distance.

What happens if you use a golf club shaft that is too flexible?

A golfer using a shaft that is too flexible may experience a ball flight that is too high, a ball that spins too much, or a shot pattern that has inconsistent dispersion.

What is custom fitting in golf?

Custom fitting through True Spec Golf takes the guesswork out of finding the shaft and club that’s right for you, improving both your distance and accuracy without compromising feel. By using the latest technology and tools to measure and account for a player’s swing and power, custom club fitting solves the question of whether or not you’re using the right golf club shafts to help you play your best game.

Why is it important to use the correct shaft in golf?

That’s why it’s crucial that golfers use shafts that enhance their performance and work with their swing tendencies, offering the right flex, length, weight, and bend profile needed to maximize performance.

Why do golfers use shafts?

That’s why it’s crucial that golfers use shafts that enhance their performance and work with their swing tendencies, offering the right flex, length, weight, and bend profile needed to maximize performance. There are many reasons a shaft might not match up with a player’s specific needs, especially if the club was bought “off the shelf”.

Why is it important to consider weight and length when fitting a golf club?

It is crucial to consider weight and length during the fitting process to ensure proper trajectory, spin, accuracy, and clean contact.

How does a golf shaft work?

When it comes to other important specs of a golf shaft, flexibility and weight work together to contribute to the end result; a shot that flies long and straight, landing on target. Some shafts can be lighter in weight, which once again biases a higher ball flight and produces more spin. Shafts that are heavier tend to do the opposite, lowering ball flight and spin rates. When considering the length of the club, improper length can, many times, lead to shots that are not struck in the center of the clubface. It is crucial to consider weight and length during the fitting process to ensure proper trajectory, spin, accuracy, and clean contact.

What is the purpose of a quality fitting analysis?

The goal of a quality fitting analysis is to fully analyze golfers, their swing characteristics and game improvement goals to determine each of the 12 Key Fitting Specifications for every golf club that will allow golfers to play to the very best of their given ability and to be able to benefit the most from lessons they may take from a competent teaching professional.

How many feet do pro golfers make?

Pros make 95 percent from three feet and that drops off sharply to 50 percent at around eight feet. So, it’s important to miss in smart spots to be able to hit shots around the greens close to save pars.

What are the factors that determine the shafting of a golf club?

The two largest factors that contribute to the selection of the right golf shafting are your swing speed and swing tempo.

What happens if the shaft is too soft?

If the shaft is too soft, it will typically flex more through impact and cause the clubhead to close and start the ball to the left with added spin. If the shaft is too stiff, it will typically cause the clubhead to come through impact a little more open and cause the shot to come off weak and low right. Let’s break down some different flex options based on driver swing speed.

What is a stiff flex shaft?

Stiff Flex or S-Flex 97-104 mph – This flex is for recreational golfers that swing fast. Very common shaft for high-level amateur players.

How to determine flex shaft?

Your starting point should be your swing speed. Measure your swing speed to make sure you are selecting the correct flex. If your swing speed is somewhere in the middle, let’s say you swing right at 97 mph, consider what your current shot shape is. If you typically hit a big slice, that can be compounded by having a shaft that is too stiff, which means a Regular flex shaft is ideal.

Where is the kick point on a golf club?

But this isn’t true. The kick point is actually a small 6” section in the middle of the shaft.

Is it down to preference and trial and error?

In the end, it really comes down to preference and trial and error. Using the factors above will still only get you in the ballpark of the correct shaft. You will ultimately want to play around with a few options and find what works best for you.

Do shafts use trajectory descriptors?

Shafts will typically use trajectory descriptors rather than note what kick point they may have. A good rule of thumb here is;

What are some of the words that clubfitters use to describe club fitting?

Confusing, black magic, techno-babble, alchemy, voodoo… these are all some of the words any clubfitter has heard used to describe club fitting. If a player spends time with 3 clubfitters, each fitter may reach 3 different conclusions, depending on their level of expertise, brand preferences and the tools/options available. This only adds to the confusion.

Why do golf clubs bend forward?

Because of momentum, gravity, and the general physics of the golf swing, shafts bend forward before the clubface makes contact with the ball. The magnitude of this forward bending is what must be considered when fitting a golf club.

What are the characteristics of a golf club?

Considering all design characteristics of a club (length, lie, loft, weight , swing weight, shaft material, shaft flex, CG, and more)

Why is golf equipment so expensive?

As manufacturers have integrated space-age materials and technologies into their designs and spent vast amounts of capital during the research and development process for each product , the price points of golf equipment have soared.

Can a lie angle error cause a ball to be struck off center?

It is worth mentioning that a lie angle error could also cause the ball to be struck off-center vertically. If the toe is digging, any shot struck towards the toe would also strike high on the face, and any shot struck towards the heel would be struck low on the face.

Is stiffness a factor in swing?

There is a general consensus that the stiffness of the shaft a player should play correlates directly to the speed at which they swing. The faster the swing, the stiffer the shaft should be. Though this is not categorically wrong, there are other factors to consider.

Which type of impact tends to shift the strike pattern more towards the heel?

Closed-faced impacts tend to shift the strike pattern more towards the toe. Alternatively, open-faced impacts tend to shift the strike pattern towards the heel.

What is loft in putter fitting?

Loft is an aspect of putter fitting that depends on the golf courses you typically play. The golf ball when it rests on the grass, settles down into the grass ever so slightly. This means that we need to launch the golf ball into the air slightly so the ball can get on the grass and start rolling as fast as possible. This has a huge influence on speed and distance control in putts.

How does the length of a putter affect stroke?

The putter is meant to swing on the inclined plane that the shaft is on. If the length of the putter is longer, the putter will need to arc more around your body , while a shorter putter can travel a little bit more straight back straight through . A putter that is not the right length, will affect the path of your stroke which can have an influence on making consistent contact and controlling the rotation of the putter face.

How does a putter grip work?

The grip on a putter works just like a golf club. If you’re a putter that does not allow the putter to rotate square to the path of the club , then adjusting the grip can help this problem along with putter head design. If you are a player with too little face rotation, then a smaller grip size can help to release the putter head, while a larger putter grip can help calm down too much face rotation or even help take the hands out from the yips.

What happens if you put the right weight on your golf clubs?

If your golf clubs are the correct weight for you your swing will feel good and let you hit good shots when you get things right . Also if your golf clubs are the right weight you will not even be thinking about how heavy or light they are! Final Thought.

What does it mean when a golf club feels too light?

If it ‘feels too light’ you might think that you have no control of the club head at all. And of course ‘feel’ is different for everyone. While some golfers are quite indifferent when it comes to swinging different weights of golf club others can feel the difference of even a couple of grams.

How much does a golf driver weigh?

With the average driver head weighing about 200 grams, a regular flex shaft typically 60 grams and a standard grip about 50 grams, the total weight of the average male golfer’s driver is approximately 310 grams. Ladies clubs by comparison are usually lighter because they have lighter shafts and on occasion lighter heads.

Why are ladies clubs lighter?

Ladies clubs are typically lighter because they have lighter shafts and often lighter heads. As with everything in golf there are some common generalisations which apply and in respect of golf club weight you will often hear the following: Golfers with slower swings and smooth tempos should play lighter clubs.

How to change weight of golf clubs?

The main ways to change the weight of your clubs is to change the shaft and / or the grip.

How many golfers swing with the lightest club?

It is estimated for example that only 12% of golfers swing of golfers get their best club head speed with the lightest club.

What is the dominant factor in golf clubs?

However, when it comes to golf clubs, weight is the dominant factor when we’re talking about performance and a subject where it’s as important to trust your feelings as it is the data.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9