what length golf club do i need

What is the standard length for a golf club?

Sep 29, 2020 · Standard length clubs are typical for golfers of an average height and wrist to floor measurement. As you can see in our golf club size chart above these would typically fit in the 34″ to 35.5″ range. Benefits Of The Correct Golf Club Sizes There are several benefits from choosing the correct golf club size for you.

How to size golf clubs for better performance?

If you are an average golfer, then the chances are you will get more distance with a shorter club because you will hit the ball better. The maximum shaft length allowed by the rules of golf is 48 inches. Not every top player plays with the longest shaft around. It all depends on their style. That’s a good lesson for us all.

How do you measure yourself for golf clubs?

11 rows · So What Is the Standard Golf Club Length? Based on the average wrist-to-floor measurement and ...

How long should my golf clubs be?

11 rows · For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25"). One might ...

How to choose how long a golf club should be?

But perhaps the most critical factor in choosing how long your club should be is your skill level. If you are an average golfer, then the chances are you will get more distance with a shorter club because you will hit the ball better.

What affects the length of a golf club?

The next thing which can affect the length of the golf clubs you need is your playing style. Some very experienced and outstanding golfers find that playing with a slightly longer or shorter club than the standard for their height suits and improves their game. Ask advice from your more experienced golf buddies.

What is the angle of a golf iron?

The lie angle is the angle between the shaft and the ground as measured when you are in a normal playing position with the sole of the club on the ground . These lie angles vary from club to club and from manufacturer to manufacturer, lie angles are about fifty-three to fifty-six degrees in drivers, about sixty-five degrees in the short irons and over seventy degrees in a putter; which is best for you will be partially dependent upon your height and the relative length of your arms. What you are looking for is a club which when you hold naturally has its sole flush to the ground. If you find you have to change your posture to make this happen, then adjusting the lie angle of your club may help.

What is the maximum shaft length?

The maximum shaft length allowed by the rules of golf is 48 inches. Not every top player plays with the longest shaft around. It all depends on their style. That’s a good lesson for us all. What is the best shaft length for you will be about your game. And remember that accuracy is what counts. An inch on the shaft length might add to the speed at which the ball moves, but that will not translate into the distance you want if you mis-hit the shot.

How long is a 3 iron?

There has been a significant change. In the late 1970s, the standard length for a man’s driver was 43 inches, and a 3 iron was thirty-eight and a half inches. The driver is now usually forty-five inches for a man, and even women’s drivers are far longer than men’s drivers were back in the 1970s. So why has this happened? It is mainly about distance. The longer a club is, the further you can hit a shot. This idea is the theory, at least. Of course, there is a price to pay for this distance, and that price is harder to hit the ball. And if you mis-hit the shot, it is not going anywhere you want.

What happens if you tailor your golf clubs?

If you tailor your clubs or if you order a set of clubs at a different length from those which you have been using, the clubs will be affected in other ways.

When to change golf clubs?

When you are still learning the game of golf or continuing to improve, then expect to change your clubs as your handicap drops. You may not be ready for a longer driver at the moment, but in a year, things may be very different.

How tall is the average golf club?

The average woman’s height in the U.S. is approximately 5’ 5” (165.1cm), with about 68% between 5' 2" and 5' 7". The average male is approximately 5' 10" (177.8cm) with nearly 68% between 5' 6" and 5' 11". The difference between the finished stock men’s and women’s clubs is usually 1" difference in the length.

How tall is a 5'10 golfer?

In the chart above, we can see that a 5' 10" male on average will have a WTF measurement just shy of 34 1/4", while the average female that stands 5' 4" would be just a hair over 31 ¼". The 6" difference in height equals approximately a 3" difference in the WTF measurement and to 1" length change. Well, at least in theory between men and women stock clubs. If you consider that a 48" junior golfer has a WTF measurement of nearly 12” less than the 70" golfer would suggest that the junior golfer get a 5-iron that is 4" shorter than a typical men’s club. However, the math does not add up as most junior charts will suggest a 48” junior to have a 5-iron in the neighborhood of 9" shorter.

How to control swingweight?

It is easier to control the swingweight by manipulating the lie than by adding (or removing) weight from the head from a production standpoint. Most clubhead are made to narrow weight ranges from one manufacturer to another and there is a limit on how much weight can be added to a club. So you may see tall golfers get a combination of extra length and a more upright lie as not to make the clubs feel too heavy or shorter golfer a shorter length / flatter lie combination so that it does not become too light.

What is the average lie angle for a 5 iron?

A common lie angle for a 5-iron is 61° , therefore the length of the 5-iron may be 37.25" to achieve the B length. This combo may be very well for a lady golfer that is 5' 8" with a 33.25" WTF measurement. A C6.5 swingweight would be perfectly normal in what you would see in a standard length woman stock set. However, let’s say this was a man we were talking about that might have the same proportions of the lady golfer, or perhaps taller but with long arms. Instead of the shorter club with the lighter swingweight, the clubfitter or manufacturer may suggest a 38” 5-iron that had a 2° flatter lie angle. This would make the swingweight in the normal range you would see for a male golfer.

Does a 1" increase in length make a golf club longer?

For taller individuals, it is logical to assume longer clubs are recommended. But it should be noted that a 1" increase in club length does not necessarily make the club 1" longer from the floor to the ground. It is the sin of the lie angle that is the length component in the vertical direction.

How does a lengthened golf club work?

A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.

What is distance in golf?

Distance: Quite simply, the maximum distance that you can drive the ball. Since clubs are designed within half an inch of each other, the adjustments are small, but the overall force changes dramatically. This is relevant to your arm length and size when swinging. A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club. This increases the ball’s velocity upon impact, and you can hit it farther.

What does weight on a golf club mean?

Swing Weight: The club is actually having more weight added to it. If you’re increasing the shaft by 1.25”, that’s more grams of weight (which many golf clubs are measured by), and it adds up. This makes the club a little bit harder to swing, unless you’ve been working with clubs that were too small this whole time and your radius has increased. The swing weight will determine your swing speed, if that’s something you keep track of, and be directly related to your distance.

Why use irons on flat ground?

Irons are used on flat ground and are supposed to give you a way to get the ball closer. If the club shaft was longer, you’d hit the bottom hemisphere of the ball on your downward swing and send it flying through the air. That’s not what we want.

Why do you need to lengthen a golf ball?

The length is to compensate for the lighter head. You can’t lightly tap the ball in if the head is heavy and the shaft is short.

Why do you have to swoop on your golf club?

Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.

What happens if your woods aren't longer?

If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.

How to determine the length of a golf club?

The first step in figuring out your proper club length is to start with your overall height measurement. This is the most basic method of identifying the proper club length you’d need, but by itself, does not offer enough information for an accurate determination. In the normal club fitting procedure, a player’s overall height is used, but only as part of the complete process of fitting a golfer for club length.

What is the standard club length for a driver?

Many years ago, the standard club length for drivers was 43”. Today it is 45”, and some manufacturers have even gone to 45 1/2” as their norm.

Why are static measurements considered a club fitting?

The two prior measurements discussed are considered “static” methods of club fitting because the measurements are performed while the player is standing still. Professional club fitters will often supplement these static measurements by incorporating an additional element into their club fitting sessions, a process that is considered “dynamic.” In a dynamic club fitting, a player will be evaluated during the course of their actual swing motion, with measurements taken at impact and by observing ball flight.

What does a professional club fitter do?

Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:

How important is shaft length in golf clubs?

The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.

Why is playing with clubs too short bad?

Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.

What happens if a golfer has a short club?

If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.

How to determine the correct size golf club for beginners?

The correct golf club size starts with the golfer’s height and wrist-to-floor measurement.

How tall is a golf club?

Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.

What factors affect the size of a golf club?

Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.

What is custom fitting golf?

Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that you can get the clubface to match up to the ball each and every time you swing. The more accurate your club sizes are, the better the chance you have of scoring and performing. Even though custom golf fittings can be expensive, most golfers find them to be very well worth the pricing.

How to adjust golf clubs?

If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them . If you don’t have the tools to do this yourself, there are typically local golf club repair shops that offer these services.

Why do manufacturers make golf tables?

Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.

What is the difference between men's and women's golf clubs?

The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.

What is the correct putter length?

When asking what length golf clubs to use, factoring in posture and wrist-to-floor measurements, most golfers usually end up with a putter between 32-35″. To have the best chance of establishing the correct putter length for your personal set-up, ...

Why use one length irons?

All that being said there is an added element of using one-length irons too which have become increasingly popular because of Bryson DeChambeau. One-length irons allow you to stand to the ball in the same way regardless of the iron you’re using, in theory helping with consistency of strike and club speed.

What happens if you putt too long?

A putter that is too long will cause you to subconsciously stand further from the ball, moving your eyes inside, instead of over, the ball. From here your arc is flatter and the toe of your putter could be off the ground, pushing your aim left of target.

Does shaft length increase clubhead speed?

As shaft length increases so clubhead speed also increases. However, as shaft length increases it is common for players to struggle to deliver the club as consistently, making it more difficult to make solid contact.

Can you take shaft length off a golf driver?

Some brands now offer different length shaft options, so you can try before you buy, while any good fitter can take length off your driver if you need to add control to your game.

Does length affect weight?

As shaft length increases, so does the weight. Increasing the length also alters the shaft's flex; adding length makes the flex softer, while a shortened shaft will play stiffer, so you'll need to bear this in mind.

Does a putter have to be upright?

Consequently, your putter path and shaft will be more upright. The heel of your putter could also lift off the ground causing it to aim right. As you can see, there is plenty to think about when considering what length golf clubs to use. Don’t forget to follow Golf Monthly on Facebook, Twitter and Instagram.

How to find the right golf club size?

Another way to find out the right golf club size for you is through a dynamic fitting. This is a more precise way of fitting and involves the use of a launch monitor to help determine the correct shaft and head to best suit the golfer.

What is a golf club fitting?

The first type of golf club fitting is a static fit , and as the name suggests, this is a static measurement taken from your finger tip or wrist to floor, trying different lie angle heads and then taking a glove measurement to determine the size of grip required by the golfer. Static fittings are more for golfers with little or no experience and, although not overly reliable, a fitting for length and grip size are better than no fitting at all.

How long is a driver shaft?

In theory, the longer the driver shaft length, the greater the shot distance. Therefore, the longer the driver the better, right? Well, the reality is actually quite different. Even though the Rules of Golf for competition allow the club shaft length of up to 48 inches, Golf Monthly notes that the average driver length used on the tour is ‘only’ 44.5 inches, while the average driver length in golf shops is about 45.5 inches.

What are the factors that are taken into account during a golf fitting?

During the fitting, factors such as ball speed, spin rate, dispersion and launch angle are taken in to account and will help to make sure that the golfer purchases the correct equipment to best suit their game.

What is the importance of accuracy when buying a putter?

When it comes to purchasing a putter, control and accuracy are imperative if you want to get the ball into the hole with the first – or at least with the lowest number of strokes possible.

Is golf expensive?

Golf can be an expensive game to get stated and cheaper options do exist in the form of golf essentials like package sets and second hand golf clubs. However, buying the wrong club can make it even more expensive. So make sure that whatever you buy it’s the correct option for your game.

Does size matter in golf?

When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect. But what is correct club size for you? Well, it depends on several factors including the different types of golf club, your swing style, posture and skill level. But above all, it depends on your height. To make the selection easier, Golfsupport therefore prepared a quick golf club size guide for beginners.

What golf clubs do you need if you are shorter than the beginning height?

If you are shorter than the beginning height on the club measurement guide, then you will need to purchase "Ladies Junior" or "Petite" golf clubs.

What is the average size of a golf club for women?

As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.

How to measure wrist for golf club?

Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).