what length golf shaft do i need

How do I measure golf shaft length?

Sep 29, 2020 · Standard length clubs are typical for golfers of an average height and wrist to floor measurement. As you can see in our golf club size chart above these would typically fit in the 34″ to 35.5″ range. Benefits Of The Correct Golf Club Sizes. There are several benefits from choosing the correct golf club size for you.

How to measure a golf club shaft length?

Between 4feet 9 inches and 5feet – Subtract 2 inches from the standard length “Is that all I need to know?” you may be asking. Unfortunately, there is more to it. Wrist to floor measurement. Firstly, the length of your arms is very, very important, and these may not be in proportion to the rest of your body.

What is the standard golf shaft length?

Oct 15, 2019 · The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches

How do you shorten a golf club shaft?

In the past most driver shaft lengths were around 43 inches up until the 1990s, where they started to get longer. You could even find custom made drivers that had shafts as long as 48 inches (the legal limit at the time per USGA rules of golf). However, this length has been shortened to a maximum of 46 inches starting in 2022.

What length should my golf shaft be?

What length of shaft do I need?

What iron shaft length should I use?

What length golf clubs do I need?

How long should my 7-iron be?

How long should my driver be for my height?

What shaft weight should I use?

When should I switch from stiff to regular?

What shaft flex should I use for irons?

Does golf club length matter?

Why are golf irons different lengths?

How to determine the length of a golf club?

To determine the approximate length of clubs that are right for your height, you need to know how tall you are and how far your wrists hang from the floor. As Golf Components explains, you can obtain your wrist-to-floor measurement by standing on a hard, level surface in regular shoes or golf shoes. Relax your shoulders and let your arms hang down.

What happens if your golf clubs are too short?

In fact, if your clubs are too short or too long, expect to spend lots of time in the rough, bunkers and water hazards, if not out-of-bounds. As club equipment guru Tom Wishon explains, the length, loft, lie of your clubs are critical factors in determining how far and high your shots will fly.

How to measure wrist to floor?

As Golf Components explains, you can obtain your wrist-to-floor measurement by standing on a hard, level surface in regular shoes or golf shoes. Relax your shoulders and let your arms hang down. Measure the distance from the point your hand meets your wrist to the floor.

How long is a 5 iron?

Clubs other than drivers gradually get shorter -- if a 44-inch steel shaft driver is indicated by the chart, your 5-iron will measure 38 inches and sand wedge 35.5 inches. Graphite clubs are slightly longer, with a standard driver at 45 inches, 5-iron at 38.5 inches and a sand wedge 36 inches. Standard club lengths for women are one inch shorter ...

Who is Jim Thomas?

The Wall Street Journal: The Importance of Good Tailoring. Writer Bio. Jim Thomas has been a freelance writer since 1978. He wrote a book about professional golfers and has written magazine articles about sports, politics, legal issues, travel and business for national and Northwest publications.

How long is a golf club shaft?

The maximum shaft length allowed by the rules of golf is 48 inches. Not every top player plays with the longest shaft around. It all depends on their style.

How long is a standard length?

Between 5 feet 9 inches and 6 feet – You will be suited to a standard Length. Between 5 feet 6 inches and 5 feet 9 inches – Subtract half an inch from the standard length. Between 5 feet 3 inches and 5 feet 6inches – Subtract one inch from the standard length.

What happens if you tailor your golf clubs?

If you tailor your clubs or if you order a set of clubs at a different length from those which you have been using, the clubs will be affected in other ways.

What happens if your putter is too short?

If your putter is too short, you will get too close to the ball, and this can mean the heel of your putter lifts off the ground, and you will not hit the ball well. The shaft length on your putter should enable you to get your eyes directly over the ball just before you take your shot.

Why is the lie angle important?

The lie angle is vital in all clubs, but it is crucial in the irons in your golf set. This is because the club has a higher loft on the clubhead, so the effect is more significant if the lie is out. A good club fitter can usually adjust the lie angle by altering the hosel on the iron.

What are the different types of golf shafts?

There are two basic types of golf shafts: steel and graphite. Often, your club will have been originally assembled with either of these types of shafts, however if you decide that you would like to change your type of shaft, you should know the difference between each shaft type. There are some newer options that combine the two materials, ...

What is a golf shaft made of?

This type of shaft incorporates steel and graphite into one shaft to get the best of both worlds for each player, to suit all playing types. Generally, the shaft is made using a steel shaft that has a graphite tip. The steel shaft allows the player to control the ball flight more, whilst the graphite tip ensures the golf ball can go ...

How much does graphite shaft weigh?

Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft! These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing.

Is graphite shaft good for women?

These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing. As a result, graphite shafts are a good choice for all golfers. In particular, they are suited to women golfers and seniors, who may struggle to produce a fast-enough swing speed to use ...

What is a multi-material shaft?

A recent addition to the market are multi-material shafts which are used on both irons and drivers. This type of shaft incorporates steel and graphite into one shaft to get the best of both worlds for each player, to suit all playing types. Generally, the shaft is made using a steel shaft that has a graphite tip.

What is flex in golf clubs?

Put simply, the flex determines a golf club shaft’s ability to bend during a swing, affecting the distance and direction. Therefore, getting the right flex in your golf clubs is important.

What is a kick point in golf?

The shaft kick-point – also known as flex-point – is the point where the shaft bends and affects the trajectory of the shot. Although the effect is only small, it is still measurable. For clarity, a shaft with a high kick-point will often give a low shot trajectory and create the feel of a “one-piece”.

What is the correct putter length?

When asking what length golf clubs to use, factoring in posture and wrist-to-floor measurements, most golfers usually end up with a putter between 32-35″. To have the best chance of establishing the correct putter length for your personal set-up, ...

What is a one length iron?

One-length irons allow you to stand to the ball in the same way regardless of the iron you’re using, in theory helping with consistency of strike and club speed. Essentially you can swing the same way regardless of what club you have in your hand.

What is a golf shaft?

Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job. So when choosing a shaft, it's important to know what specifications to look for. The golf club head and golf grip will each have their own specifications/measurements as well, and having all this information on hand can guide you to choose the right shaft, as well as ensure the club assembly process goes smoothly. Here are 5 golf shaft specifications you'll want to know:

What is the shaft of a golf club?

Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job.

What is shaft flex?

Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), ...

How tall is a 5'10 golfer?

In the chart above, we can see that a 5' 10" male on average will have a WTF measurement just shy of 34 1/4", while the average female that stands 5' 4" would be just a hair over 31 ¼". The 6" difference in height equals approximately a 3" difference in the WTF measurement and to 1" length change. Well, at least in theory between men and women stock clubs. If you consider that a 48" junior golfer has a WTF measurement of nearly 12” less than the 70" golfer would suggest that the junior golfer get a 5-iron that is 4" shorter than a typical men’s club. However, the math does not add up as most junior charts will suggest a 48” junior to have a 5-iron in the neighborhood of 9" shorter.

What is the average lie angle for a 5 iron?

A common lie angle for a 5-iron is 61° , therefore the length of the 5-iron may be 37.25" to achieve the B length. This combo may be very well for a lady golfer that is 5' 8" with a 33.25" WTF measurement. A C6.5 swingweight would be perfectly normal in what you would see in a standard length woman stock set. However, let’s say this was a man we were talking about that might have the same proportions of the lady golfer, or perhaps taller but with long arms. Instead of the shorter club with the lighter swingweight, the clubfitter or manufacturer may suggest a 38” 5-iron that had a 2° flatter lie angle. This would make the swingweight in the normal range you would see for a male golfer.

What is WTF in golf?

Wrist-to-floor measurement or WTF for short is a common method in which the golfer stands with their feet together in street / tennis shoes with their arms hanging straight down and relaxed. Then someone measures from the floor to the crease just above the wrist.

Can you buy jeans without trying them on?

If that person knows what their waist and inseam measurements are, they can purchase a pair of jeans that will most likely fit (but not always) without having to try them on. Then the jeans can be selected or paired down based upon the color/finish and leg cut, both of which are personal preferences.

How long should a golf driver shaft be?

Every golfer wants to hit the ball farther, and the quest for maximum length has led many 21st century golfers to opt for drivers with shafts that are 1 to 3 inches longer than the standard recommended length. However, the longer the shaft the harder it is to control the club and hit the ball squarely. You might hit the occasional drive farther ...

How long is a standard driver?

However, in the 21st century a standard driver is considered to be 45 inches.

How long is a driver?

However, in the 21st century a standard driver is considered to be 45 inches.

Who is Jim Thomas?

Jim Thomas has been a freelance writer since 1978. He wrote a book about professional golfers and has written magazine articles about sports, politics, legal issues, travel and business for national and Northwest publications.

What happens if your driver shaft is too stiff?

Generally speaking, a driver shaft that’s too stiff will cause shots to launch too low, with too little spin and low peak heights. A shaft that’s too weak, on the other hand, may cause shots to spin too much, fly too high, and widen dispersion patterns.

Does the length of a driver shaft affect the strike point?

Length. Of course, the length of your driver shaft will significantly change how the golf club feels, but length affects strike point, too. As Briand says, a longer shaft will cause a less consistent strike on the face, and the golfer will tend to hit the ball closer to the heel.

What does low torque mean on a shaft?

5. Torque. A low torque measurement means that a shaft has greater resistance to twisting, while a high torque measurement means it will twist more easily.

What is the difference between a high torque shaft and a low torque shaft?

A low torque measurement means that a shaft has greater resistance to twisting, while a high torque measurement means it will twist more easily. Briand says that torque “plays more into feel than anything else.” The lower torque shafts will have a “boardy” feel, while the higher torque shafts will have a “whippy” feel.

Does a golf ball fly higher or lower?

The weight of a shaft has a similar correlation to performance as flex. The heavier a shaft is, the more likely it is that your golf ball will fly low and with less spin. If it’s lighter, the ball will tend to fly higher and spin more.

Does a high bend point lower or raise the ball?

According to Briand, a high bend point will lower ball flight and a low bend point will raise ball flight. So, if you tend to have a ball flight that’s too high, look for shafts that have a high kick point, and vice versa. It’s important to note that variations in length and shaft tipping will impact the designed bend point of a shaft.

Charting The Right Height

The Tall and Short of It

• A standard golf industry chart, such as the one found at The Club Shack, applies your wrist-to-floor measurement to your height to generally determine the length of the clubs that fit you best. For example, if you are 6-feet tall and your wrist-to-floor measurement is 35 inches, a standard length driver -- 44 inches for a steel shaft driver and 45 ...

See more on sportsrec.com

Drivers and Other Clubs

Roughly The Right Height