Full Answer
What is the best thickness of foam for a chair cushion?
However, 7” to 8” thickness is considered only firm for body weights over 200 pounds in seating applications. This foam can be used for regular or heavy use applications. Lux Foam - HQ is a high quality foam suggested for seats, chairs, cushions, benches, and mattresses. It is also suggested for dining room seats from 1” to 3” in thickness.
How much should you add to a seat cushion to replace foam?
When replacing seat cushion foam, generally, you will need to add 1” to the cushion width, and 1” to the cushion length. You may also want to add 1” to the depth of the cushion as well. This will ensure that your seat cushions have a domed appearance instead of looking too flat.
What size foam insert do I need for a sofa?
The dimensions of a foam insert will depend on the size of the cover it is being put into. It is important keep in mind that thickness is related to the firmness of a cushion. Typically, the thicker the cushion is, the firmer it will feel. What is the best foam density for a sofa?
What type of foam is used for cushions?
Poly Foam. A medium firmness foam suggested for occasional use. Poly foam can be used for cushion replacement and mattresses, as well as packaging and crafts. It has a typical life of 1 to 2 years.
What are the dimensions of a golf cart seat?
On average the front seat of a golf cart is 41 ½ inches while the back seat is approximately ¾ inch narrower. Most carts have seats that are approximately 20 ½ inches deep to allow most golfers to sit comfortably.
How thick should a foam cushion be?
Standard Size Upholstery Foam Sheets Thickness should be between 3/8" and 30" (1–76 cm).
What kind of material is used for golf cart seats?
vinyl seatsMany golf carts come standard with vinyl seats. Although they are available in a wide range of colors and styles, making them an attractive proposition, they can also be sticky to sit on in hot weather and cold to the touch on winter days.
How do you make golf cart seats?
1:0716:35How to rebuild a golf cart seat! Making the base, measuring, cutting and ...YouTubeStart of suggested clipEnd of suggested clipAnd then the board will fit between the two two rails and then also I have to figure out theMoreAnd then the board will fit between the two two rails and then also I have to figure out the dimensions from the side. And I've already measured it on the golf cart.
What density foam is best for seat cushions?
Summary: High Resilience foam at 2.8 – 3.0 lb. per cubic ft. is the best foam to use for cushions. It is highly responsive for a quick return action and will provide an extra bounce.
How thick should my cushion be?
0:131:57How to choose the proper thickness for indoor bench cushions - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut ideally I think a three-inch cushion. Looks best and is more comfortable for someone with aMoreBut ideally I think a three-inch cushion. Looks best and is more comfortable for someone with a height like I have this is a three-inch cushion on a 14-inch base.
How much does it cost to reupholster a golf cart seat?
That all depends on a handful of factors, but we anticipate you'll probably spend anywhere from $200 to $300 (or more) if you're buying everything new.
How many yards of fabric do I need for a golf cart seat?
If you decide to use only one color of fabric for your seat, 1 yard may possibly work, but we recommend purchasing 2 yards of fabric, or 1 yard of each color if you decide to recreate the style we've chosen in the video.
Are all golf cart seats the same size?
The dimensions of different types of carts will vary the most in length due to the number of seats a golf cart can have. More seats added to a cart will add to its length but usually minimal amounts to the width and height. The width and height of most golf carts do not change much as the number of seats is increased.
How do you recover golf cart seats?
3:055:25Recovering or Replacing Golf Cart Seats | ASK DAVE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter that staple down the straight lines and Corners. You may have to remove some Staples along theMoreAfter that staple down the straight lines and Corners. You may have to remove some Staples along the way to re-stretch folds or wrinkles out and try it again to get nice and smooth. Especially.
How do you replace golf cart seats?
0:005:52How to install Golf Cart Seat Covers - For All Carts! - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor stretching the vinyl around tight corners a heat gun is going to be super helpful. The easiestMoreFor stretching the vinyl around tight corners a heat gun is going to be super helpful. The easiest way to attach the vinyl to the seat. Back is going to be a pneumatic stapler.
How do you fix golf cart seats?
1:386:45Here's How to Restore and Repair Your Golf Cart Seat with ALL-IN ...YouTubeStart of suggested clipEnd of suggested clipNow pushed it into this hole fill it up do the same thing brother get in there and use that productMoreNow pushed it into this hole fill it up do the same thing brother get in there and use that product around now put that hardens.
Is 32 density foam good?
A 40 density would be high density in polyfoam (PU Foam), not so much in memory foam, and very low for others. For example, in the Indian demographic, people prefer the PU Foam to have a density value between 32 and 40. Similarly, memory foam should have a density value between 50-60 and between 55-65 for latex foam.
How thick should dining room chair foam be?
2″ thickThe foam that you select for your dining room chairs should be at least 2″ thick and a firmness of firm to prevent bottoming out. High Density Foam: For dining room chairs that only gets occasional use. Lux Foam: A step-up from High Density foam for extra comfort, support, and longevity.
How do you choose foam for seat cushions?
Choosing the right foam for your seating projectComfort: The softer the foam, the more comfortable it will be. ... Overall, open-cell foam is recommended for cushioning, padding and backing for furniture when you are looking for a balance of comfort and support.More items...•
What type of foam is used for couch cushions?
Polyurethane foamPolyurethane foam is the most common type of foam fill for sofas, and is also often used as “toppers” for mattresses. It is usually yellow in color and high-resiliency (meaning it bounces back quickly).
Which is the best foam for sofas?
The best foam for sofas is polyurethane foam, which offers different degrees of support and cushioning depending on its firmness and density. Choos...
What is the best foam for upholstering dining room chairs?
When upholstering dining room chairs, a higher density, firmer foam is recommended. Typically, dining room chairs range from 2-3" thick, but with s...
What is a high-density foam?
When a foam is high-density, it is considered to be a longer lasting, higher quality solution. When it comes to cushions, the higher the density, t...
What is firm foam?
When discussing firmness, it is important to know that choosing the right foam comes down to personal taste. In foam, firmness is measured using IL...
What happens if you put too much foam on a cushion?
If the new foam fillings are too big you may strain the seams and zip on your cushion cover and your new cushion will not look right
What is outdoor foam?
Why use outdoor foam? 1 The foam has an open cell structure that is perfect for areas where your cushions get wet 2 Outdoor foam dries almost immediately after exposure to: rain, salt spray, melting snow, morning dew, washing, or other types of moisture and humidity 3 Recommended for outdoor seating applications such as outdoor furniture, patio cushions, golf carts, boats, or wherever cushions are exposed to the elements
What is foam used for?
Recommended for outdoor seating applications such as outdoor furniture, patio cushions, golf carts, boats , ...
Can you replace patio cushions with outdoor foam?
Replace your flat patio furniture cushions with new outdoor foam. eFoamstore uses outdoor foam to make new cushions to your size specifications and we'll help you measure them as well. The open cell structure of outdoor foam allows water to pass through easily. This drainable property is perfect for areas in which cushions may get wet.
What is the best fabric for outdoor cushions?
You don't need to go as thick for the backrest cushions, but that is your choice. Sunbrella upholstery fabric is an excellent choice for outdoor cushions.
What is dry fast foam?
Open cell foams make a comfortable and cool seating cushion or mattress. Dry Fast is a high-quality open cell foam. Dry Fast Foam is formulated with an antimicrobial agent to prevent mold and mildew.
How long does polyurethane foam last?
High Density Polyurethane Foam is available in medium, firm and extra-firm firmness levels and typically lasts up to 12 years. Some high density foams are antimicrobial as well.
Do you put batting on foam?
The most important rule when layering different types of foam is that you always put the firmest foam on the bottom, whether that's high density polyurethane or a thin layer of closed cell foam.
Can you use silk film to shrink foam?
If you choose Dry Fast, yes you can use the silk film to shrink the foam and insert it into the cushion, but then you'd want to remove the silk film so it doesn't interfere with Dry Fast's water drainage properties. Yes, you should account for the batting in the total thickness of the foam.
Can you wrap batting around foam?
However, wrapping batting all the way around your current foam will mean your cushion covers probably won' t fit anymore. So, you'd have to remake the covers to the new thickness. If you only glue batting to the top of the foam ( not sides and bottom) you can probably get away with using your existing covers.
Do you need to glue vinyl to seat foam?
They said you don't need to glue the vinyl to the sew foam after the sew foam has been glued to your seat foam. So, here are the steps: 1. With Foam Lock Spray Adhesive, glue the back side of the sew foam to your upholstery/seat foam. Wait for this to completely dry. 2.
How many layers of foam do you need for a restaurant bench seat?
This restaurant bench seat required two custom cut layers of High Density foam to give it the right shape
Can you use fiberfill in cushions?
You can use fiberfill in cushions, though it does tend to break down and flatten out more quickly than foam, and does not stay in place very well, so tends to get lumpy. That said, fiberfill can be fluffed up to a certain extent when it does get flat, so you might get away with it for a while.
Can you replace a sofa cushion with foam?
If you’re doing your own project with ANY kind of foam – replacing a sofa cushion, re-covering (with new foam) your dining chairs, or building a new window seat cushion – you’re going to need to know that there are different foams for different purposes.
Does glue help cushion firmness?
The glue will add firmness to the cushion, which might be a good thing if the foam is lower quality. Carla
Is back foam soft?
Your back foam should be softer than your seat foam, since there’s a lot less pressure from leaning back and you want a bit of give there. I’m not sure how things work in the UK, but I would suggest visiting your local upholstery shop to see what they have. Here in the States, I think most upholsterers are willing to sell custom cut pieces of foam to customers who just want to replace the foam in their cushions. They will also know their own product, and should have some samples that you can feel and test first hand. There’s a wide range of qualities and types of foam out there and an infinite range of personal preference so unfortunately there’s no single answer to your question. One thing to remember is that density is not the same as firmness. Check out the link to the eFoam Store above for a good explanation of the difference. In general, the higher the density rating, the better quality the foam is.
