How to install lights on a club car golf cart?
The Club Car golf carts have a removable bumper and a proper space for lights. Simply secure the light to the frame with screws and connect it to the switch. Make a secure connection with the battery and fuse panel, located under the driver’s seat. Reconnect the battery terminals and test your lights by using the switch.
Where is the fuse on a golf cart?
In a 1997 Club Car, the fuse is located in the electrical components black box that is present near the battery. On the other hand, in a 2005 Club Car Precedent, the fuse is connected to a blue wire under the golf cart seat. A golf cart fuse can blow for many reasons such as a faulty relay switch, loose connections or a naked wire.
What power do I need for my golf cart electrical accessories?
Most electrical accessories in the golf car industry are powered via a 12VDC source. There are some exceptions with headlights as we offer some 36VDC and 48VDC versions. Providing a suitable 12VDC source for your golf cart electrical accessories will depend on several things.
What size fuse do I need for a light switch?
If each light draws 0.05a, for a total of 0.2a, you can use a 1 amp fuse. If each light draws 0.5a, for a total of 2 amps, you can use a 3 to 5 amp fuse.
Is there a fuse for the lights on a golf cart?
Many of the electrical components in a golf cart use fuses, including lights, cigarette lighters, power outlets, fans, horns and turn signals. Keep in mind that fuses blow for a reason. If a fuse burns out for the same application more than once a year, there is something wrong with your cart's electronics.
Where are the fuses in a Club Car golf cart?
In a 1997 Club Car, the fuse is located in the electrical components black box that is present near the battery. On the other hand, in a 2005 Club Car Precedent, the fuse is connected to a blue wire under the golf cart seat.
Why are my lights not working on my golf cart?
A blown-out headlight fuse is the main reason that your EZGO RXV golf cart lights are not working. An incorrect circuit connection to the headlight fuse can also cause the lights to stop working. There are times when the circuit wires are torn or worn out.
Where are the fuses on an EZ Go golf cart?
You'll need to open up your cart's engine hood to find this fuse. By contrast, the fuse box in 1990 EZGO golf carts – and those before and after – may be located in the wheel of your golf cart. By this, we mean the steering wheel – you'll need to pry off a small cover to get easier access to them.
Where is the reset button on a Club Car golf cart?
Identify your main battery supply (usually the largest battery) on your motor. Check around this supply for a small red button that may or may not be labeled “Reset”. Press and hold this button for a few moments and then release it to reset the motor.
How do you tell if a fuse is blown?
Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.
What voltage are golf cart headlights?
12-voltsBrake lights, tail lights, turn signals, horns, headlights, radios, GPS and similar accessories on your golf cart use 12-volts.
What voltage are Club Car headlights?
around 8 voltsPower going to all lights is around 8 volts,bulbs are all good and corrosion free, club car is running great. Comments: If you have 12V bulbs in that unit, then 8V is too low. Need to chase the voltage back to see where it's dropping with a multimeter.
How do you wire golf cart headlights?
1:413:27Updates to a Club car Golf Cart wiring up some headlights and taillights ...YouTubeStart of suggested clipEnd of suggested clipBut there is a light switch. And over here we have a fusible link tied in and what I did was this toMoreBut there is a light switch. And over here we have a fusible link tied in and what I did was this to tie. In these two batteries in the front they're going to be different from 36 volt and 48 volt.
Is there a fuse in a golf cart charger?
If the Club Car's computer is working correctly, the relay should make a “click” sound when you plug in your charger. If it does not, then you could easily have a blown fuse. If you check the fuse and it is okay, then you could also have a damaged relay, although this is rare.
How do you troubleshoot an electric club car?
Test the wall socket where you charge your cart. Every golf cart has a built-in charger that connects to a wall socket. ... Expose your golf cart batteries. ... Test the batteries for voltage. ... Replace dead batteries. ... Expose the motor for inspection. ... Reset the motor. ... Test the cart.
Where is the solenoid located on a club car?
0:095:38Replace Solenoid in Golf Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipCart um your solenoid could be located in a bunch of different places but almost always underneathMoreCart um your solenoid could be located in a bunch of different places but almost always underneath the seat.
Where is the OBC located on a club car?
0:393:20How to Replace on Club Car Precedent Golf Cart | OBC - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight hand corner listen to the very center of the car is a five digit number that's the actualMoreRight hand corner listen to the very center of the car is a five digit number that's the actual number of this OBC. And what we would need if you call in being the ordering bumper.
Do golf cart chargers have fuses?
Golf Cart Issues If the Club Car's computer is working correctly, the relay should make a “click” sound when you plug in your charger. If it does not, then you could easily have a blown fuse. If you check the fuse and it is okay, then you could also have a damaged relay, although this is rare.
Where are the Fuses on a Golf Cart Located?
You can use your golf cart's service panel to help you find where the different fuses are located. The service panel is commonly located on the rear fender, although this will vary from model to model. Trace the malfunctioning issue to the appropriate fuse. For instance, if you're having issues with the cart's electric start, check the inside of the service panel for the location of the electrical start fuse.
How Do You Identify a Golf Cart Fuse?
The easiest way to identify a fuse is by sight. Keep in mind that your golf cart will probably contain several different types of fuses, including blade, cartridge, mega, midi and others. This fuse chart will help you determine what type of replacement fuse you need. You can also bring the fuse into your nearest Batteries Plus store and have one of our associates identify it for you.
What is wrong with my golf cart?
Keep in mind that fuses blow for a reason. If a fuse burns out for the same application more than once a year, there is something wrong with your cart’s electronics. There are many reasons for this.
Why do carts need fuses?
Fuses play an important role in protecting your cart’s electrical system from overloading. If the current in your cart exceeds the safety rating of the wires or components, the fuse will melt in order to stop the flow of electrical current.
Do golf carts have fuses?
Yes, golf carts contain fuses just like those found in a car or truck. Fortunately, a blown fuse is an easy fix. In this blog, we’ll take you through the process of finding, identifying and changing a golf cart fuse, so you can get on with your game.
Can you bring a fuse into Batteries Plus?
You can also bring the fuse into your nearest Batteries Plus store and have one of our associates identify it for you. One important thing to keep in mind, be sure that the replacement fuse you pick is the same fuse type as the old one and has the same amperage. For instance, if the fuse is a 5 amp blade fuse, you’ll need to replace it ...
Types of Golf Cart Electrical Accessories
Golf cart electrical accessories may include, but certainly are not limited to, gauges (gas, hour meters, speedometers, volt meters, and charge indicators), lights (head, tail, brake, strobe, spot, security, fog, decorative holiday, marker and turn signal lights), cigarette lighters, power outlets, fans, horns, various switches (light, horn, turn signal, and key), and voltage reducers..
Typical Installation of Golf Cart Electrical Accessories
Most electrical accessories in the golf car industry are powered via a 12VDC source. There are some exceptions with headlights as we offer some 36VDC and 48VDC versions. Providing a suitable 12VDC source for your golf cart electrical accessories will depend on several things.
Gas Golf Cart Electrical Accessories Installation
First, let’s address providing a suitable 12VDC source for golf cart electrical accessories in a gasoline powered golf cart. All gas golf cars draw power from a 12 volt battery for the ignition system to start the car. With this type of system, you wire directly to the battery for the 12VDC source.
36 Volt Golf Cart Electrical Accessories Installation
Installing electrical accessories into a 36 volt golf car provides a bit more of a challenge. Mostly, since the battery bank does not provide 12V already as in the gas installation above. Luckily, 36V systems generally use six 6 volt batteries and six is a divisor of twelve.
48 Volt Golf Cart Electrical Accessories Installation
Installation of 12 volt accessories into a 48 volt system presents its own unique problem. These 48 volt systems typically use six 8 volt deep cycle batteries in series to provide the 48 volts.
Where is the Fuse Box Located on a Golf Cart?
Where is the fuse box located on a golf cart? Most EZ-GO carts will the fuse located in the charging receptacle. The 2008 EZ-GO TXT gas golf carts have inline fuses that are connected to the key switch.
Where is the fuse panel on a 1990 golf cart?
In 1990 Marathon golf carts the fuse panel is situated behind rubber air intake bellows on the inner body on the passenger side where it’s fitted to the carburetor. In a 1997 Club Car, the fuse is located in the electrical components black box that is present near the battery.
Why push a golf cart fuse in straight?
It’s important to push the fuse in straight as far as it will go to avoid the possibility of a weak connection that results in the fuse blowing up again. If the fuse tends to blow repeatedly, the golf cart has a major problem with its electrical system. It’s recommended having a professional inspect your golf cart.
What happens when you change the starter on a golf cart?
When the starter is changed, the fuse of the golf cart will stop blowing up. Alternatively, the starter generator wire tends to vibrate and eventually blow out the fuse after grounding. The solenoid tends to click on and off at a very fast rate repeatedly when the pedal is deactivated.
What is the fuse on a 2008 EZ Go TXT?
The 2008 EZ-GO TXT golf cart uses an inline fuse with a small wire going to the key switch. This wire is present at the point where the big wire of the positive battery terminal is connected to the solenoid.
What is the fuse on an Alltrax golf cart?
Golf carts with an Alltrax controller usually feature a 400-amp fuse fitted on the controller. This fuse must be connected to the positive terminal of the main battery pack.
Why does my golf cart fuse blow?
A golf cart fuse can blow for many reasons such as a faulty relay switch, loose connections or a naked wire.
How many volts does a golf cart take?
Even the most basic voltage reducer will do the job, taking 16,18, 36 or 48 volts down to 12. Check out Golf Cart Voltage Reducers for more information.
When installing electrical accessories, should a golf cart be in the TOW position?
Your golf cart should always be in the TOW position when installing electrical accessories such as lights.
What to do before taking a golf cart out on the street?
The cardinal rule before taking your golf cart out on the street, EVEN WITH the proper lighting/indicators is: CHECK YOUR LOCAL LAWS. Laws and rules are constantly changing, so before taking your golf cart out on the roads, ALWAYS check with your local municipality.
Do you have to engage the parking brake on a gas golf cart?
Yes. If you have a gas golf cart, you will need to engage the parking brake prior to installation. This ensures that your golf cart stays put while you’re working on it. I’ve hooked up the light kit and voltage reducer, but some of the lights are not coming on or came on for a minute and went off.
Is it legal to drive a golf cart on the street?
In short, the laws on this topic vary not only from state to state, but also by municipality/city. The cardinal rule before taking your golf cart out on the street, EVEN WITH the proper lighting/indicators is: CHECK YOUR LOCAL LAWS. Laws and rules are constantly changing, so before taking your golf cart out on the roads, ALWAYS check with your local municipality.
Can you replace factory lights with a light kit?
Our light kits are made to replace any previously installed factory light kit that you would have on your cart. With that said, because they are made to replace the factory lights, they should slide into the existing cut-outs that you have, with no additional cutting. If you’re unsure and would like to double check, we are always happy to send the cut-out templates so you can match up the dimensions prior to ordering. Many of these are included on the specific product pages.
Is it normal to have brake lights on when the brakes are locked?
Yes. This is completely normal. The brake pad/switch has a timer relay built in. When the brake pedal is locked and the brake switch is activated, it keeps the lights on for about 60 seconds before shutting them off.
What is the correct fuse size?
One common misconception about choosing the correct fuse size is that it’s dependent on the load of the circuit. Actually, the load of the circuit should have nothing to do with choosing a fuse size. The fuse size should be based on the SMALLEST wire (largest gage number) in the circuit.
How much should a fuse be rated?
For your fuse to do its job correctly and protect your wires, it should be rated about 1.1 to 1.5 times the rated current value. It’s also a great idea to get an ATC fuse holder to protect and mount your fuse. One common misconception about choosing the correct fuse size is that it’s dependent on the load of the circuit.
Why do you need a fuse?
The main function of a fuse is to protect your wiring, but in order to do so, you’ll have to get the right fuse wire size from the start, too low and it’ll blow, too high and you’ll end up doing damage to the whole circuit!
What is fuse rating?
You’ll usually find the fuse rating on the side of your fuse, which will be given in amps. Fuse rating is the amount of current needed for the fuse to blow or break. When this happens, it stops the electrical power from flowing through the electrical circuit.
How to determine fuse rating?
How to calculate fuse rating 1 Determine the wire gage you already have by locating it on the package or simply by measuring it. 2 Use the following table to determine the maximum current for whatever wire gage is being used.
How to find the minimum wire size needed?
Find the items that you’re installing and their current requirements. Add the values and divide by 1000 to get your total current in Amps. You can use this value in the fuse size chart above to determine the minimum wire size required.
Why is fuse rating important?
The fuse rating is a valuable piece of information because it helps you to protect your electrical circuit and therefore should never be neglected. Every electrical circuit will need a different amount of electrical current, what is just right for one electrical circuit may be too much or too little for another.
How to install golf cart lights?
Step 1. Disconnect the chassis black wire from the negative battery terminal on your golf cart. Then, mount your lights on either the front bumper or top of your golf cart if your cart has a roll bar. If it does not have a roll bar, then clamping the lights to the front bumper is the next best place to install the lights. Step 2.
Why don't golf carts have lights?
By Jackson Lewis. Most golf carts do not come with lights because their primary use is for the day on golf courses. A lot of people have begun using golf carts to get around large areas at work and at homes with large yards.
How to test a light switch?
Set the toggle switch in the mounting hole previously drilled. Then, re-connect the negative battery terminal. Test the light by turning the light switch to the "on" or "up" position and your lights are now setup.
Do you need a mechanic to install lights on a golf cart?
If you use your golf cart at night for transportation, you should install lights to help you see where you are driving. You do not need to hire a mechanic to install lights on your golf cart. You can install lights on your cart in an afternoon.
How many batteries does a golf cart have?
Go to the battery and disconnect the negative terminal. A golf cart can have up to six batteries, so disconnect the negative terminal from each of the batteries. The batteries can be found under the front seat.
How to connect a fuser to a battery?
Take the inline fuser holder and connect one end of the lead to the positive battery terminal. You will need a solderless ring terminal to connect these pieces.
How to test a light switch?
Test the lights by turning the toggle switch to the on position. If the lights do not come on, check your wiring and battery terminals.
Can you replace lights on a golf cart?
Replacing lights in a golf cart can be easy with the right tools. It's easy to replace or add lights to a golf cart. This technique can be used for any golf cart, whether it is powered by gas or electricity. Before beginning, gather all of your tools and materials in one spot that you can easily reach.