what size golf clubs do i need 5 9?

We’ll cover the standard lengths of each golf club, which can vary slightly by manufacturer and style of clubs. Standard Length of Woods Driver: 45 inches 3 Wood: 43 inches 5 Wood: 42 inches 7 Wood: 41 inches 9 Wood: 40 inches

Full Answer

What size golf clubs do I Need?

There are two measurements that you need to take before shopping for a golf club. The first one is your height. Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance.

Are all golf clubs the same size?

For instance, not all clubs have the same standard sizing. Woods are different than irons and putters in terms of standard sizing. Grip Size. Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements.

How to measure the length of golf clubs?

Based solely on the overall height, here’s the golf club length chart: 2. Get Your Wrist-to-Floor Measurement (once more, “static” fitting) Now, this measuring approach is the most commonly used for acquiring a proper or accurate length of golf clubs. Seems like a more complete method indeed.

Are your golf clubs too big or too small for You?

If your clubs are too big or too small for you, you’ll likely make contact with less of the clubface – which will decrease your accuracy and consistency. When your clubs are the right size for you, you’ll get more distance on every shot.

What is the lie angle of a golf club?

What is the shaft flex of a golf club?

Why do women's golf clubs fly low?

Why is it important to use golf clubs?

How to know if a grip is too big?

What material is a clubhead made of?

See more

About this website

How do I know what size golf clubs I need?

To choose golf clubs that are the right fit, all you need is your height. If you're between 5 ft 9” and 6 ft (1.5 m 23 cm and 1.8 m) tall, you should go with the standard length for golf clubs. If you're taller than 6 ft (1.8 m), you'll need longer clubs.

How long should my driver be 5 9?

As a general rule, taller golfers will need a bit longer of a driver shaft. For example, PGA phenom Rickie Fowler is only 5'9″ and swings one of the shortest drivers in pro golf at 43.5 inches....Driver Shaft Length Based Solely on Height.Height (feet/inches)Driver Shaft Length< 4'10”43″9 more rows•May 9, 2021

How long should my golf clubs be for my height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

What size driver do I need for my height?

The Tall and Short of It For example, if you are 6-feet tall and your wrist-to-floor measurement is 35 inches, a standard length driver -- 44 inches for a steel shaft driver and 45 inches for a graphite shaft driver -- would be appropriate.

What size golf clubs should I buy for a junior?

Golf club sizes for kids and juniors are shorter than the standard size of standard clubs. For a shorter junior, clubs will range from 20″ to 26″ in length and for a taller junior they will range from 42″ to 30″ in length from driver to putter.

What does it mean to use the correct size golf club?

When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.

Why is it important to know the size of your golf clubs?

This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.

Why is it important to choose the right golf club size?

These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.

Why are golf clubs so complex?

The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.

How to make your golf swing more efficient?

To make your golf swing feel more efficient, you have to match your lie angle to your club length based on your position with regard to the club. This will help you to hit shots that feel more comfortable and it will help with more consistent swings.

Who invented single length irons?

Single-length irons were introduced by Bryson Dechambeau and that has changed the way that people think of golf club sizes. A recommendation made by Bryson is that your entire iron range should be the same length as your 7 iron.

Is the length of a putter a factor?

The length of putter can have a big impact on both control and accuracy, but the selection of putter length is not just dependent on the golfer’s height. Depending on the golfer’s experience, it may be necessary to accommodate the golfer’s style of putting in to the measurement, as technique is a huge factor when it comes to making the decision ...

Does size matter in golf?

When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect. But what is correct club size for you? Well, it depends on several factors including the different types of golf club, your swing style, posture and skill level. But above all, it depends on your height. To make the selection easier, Golfsupport therefore prepared a quick golf club size guide for beginners.

How long should a golf club be?

The most common method used to recommend the length of a golf club is a "height-based" chart. Golf clubs are usually available in two primary lengths (excluding juniors) and somewhat based on statistics, like the average height of an average male and female. The average woman’s height in the U.S. is approximately 5’ 5” (165.1cm), with about 68% between 5' 2" and 5' 7". The average male is approximately 5' 10" (177.8cm) with nearly 68% between 5' 6" and 5' 11". The difference between the finished stock men’s and women’s clubs is usually 1" difference in the length.

How tall is a 5'10 golfer?

In the chart above, we can see that a 5' 10" male on average will have a WTF measurement just shy of 34 1/4", while the average female that stands 5' 4" would be just a hair over 31 ¼". The 6" difference in height equals approximately a 3" difference in the WTF measurement and to 1" length change. Well, at least in theory between men and women stock clubs. If you consider that a 48" junior golfer has a WTF measurement of nearly 12” less than the 70" golfer would suggest that the junior golfer get a 5-iron that is 4" shorter than a typical men’s club. However, the math does not add up as most junior charts will suggest a 48” junior to have a 5-iron in the neighborhood of 9" shorter.

What is WTF in golf?

Wrist-to-floor measurement or WTF for short is a common method in which the golfer stands with their feet together in street / tennis shoes with their arms hanging straight down and relaxed. Then someone measures from the floor to the crease just above the wrist.

What is the average lie angle for a 5 iron?

A common lie angle for a 5-iron is 61° , therefore the length of the 5-iron may be 37.25" to achieve the B length. This combo may be very well for a lady golfer that is 5' 8" with a 33.25" WTF measurement. A C6.5 swingweight would be perfectly normal in what you would see in a standard length woman stock set. However, let’s say this was a man we were talking about that might have the same proportions of the lady golfer, or perhaps taller but with long arms. Instead of the shorter club with the lighter swingweight, the clubfitter or manufacturer may suggest a 38” 5-iron that had a 2° flatter lie angle. This would make the swingweight in the normal range you would see for a male golfer.

Does a 1" increase in length make a golf club longer?

For taller individuals, it is logical to assume longer clubs are recommended. But it should be noted that a 1" increase in club length does not necessarily make the club 1" longer from the floor to the ground. It is the sin of the lie angle that is the length component in the vertical direction.

Can a man buy jeans based on height?

For example, a man does not purchase jeans based upon their height, rather two important pieces of information. If that person knows what their waist and inseam measurements are, they can purchase a pair of jeans that will most likely fit (but not always) without having to try them on.

How to get the right shaft length for golf clubs?

Go to a club fitter to get the right shaft length for you and ensure your clubs, especially your irons, have the correct lie angle for you. When you are still learning the game of golf or continuing to improve, then expect to change your clubs as your handicap drops.

How long is a golf club shaft?

The maximum shaft length allowed by the rules of golf is 48 inches. Not every top player plays with the longest shaft around. It all depends on their style.

What is the angle of a golf iron?

The lie angle is the angle between the shaft and the ground as measured when you are in a normal playing position with the sole of the club on the ground . These lie angles vary from club to club and from manufacturer to manufacturer, lie angles are about fifty-three to fifty-six degrees in drivers, about sixty-five degrees in the short irons and over seventy degrees in a putter; which is best for you will be partially dependent upon your height and the relative length of your arms. What you are looking for is a club which when you hold naturally has its sole flush to the ground. If you find you have to change your posture to make this happen, then adjusting the lie angle of your club may help.

What happens if your putter is too short?

If your putter is too short, you will get too close to the ball, and this can mean the heel of your putter lifts off the ground, and you will not hit the ball well. The shaft length on your putter should enable you to get your eyes directly over the ball just before you take your shot.

How many inches to add to standard length?

Between 6 feet 6 inches and 6 feet 9 inches – Add one and a half inches to the standard length.

How long is a standard length?

Between 5 feet 9 inches and 6 feet – You will be suited to a standard Length. Between 5 feet 6 inches and 5 feet 9 inches – Subtract half an inch from the standard length. Between 5 feet 3 inches and 5 feet 6inches – Subtract one inch from the standard length.

What happens if you put too long on a putter?

If a putter is too long, you will compensate by standing too far back from the ball, which will spoil your eye contact. It is also probable that you will push your elbows to your side, and this will mean you will not be able to make the natural pendulum move which good putting entails.

What is the average size of a golf club for women?

As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.

How much shorter are ladies golf clubs than men?

Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.

How to measure wrist for golf club?

Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).

What is the lie angle of a golf club?

Ensure that the lie angle of the club is correct. The lie angle is the triangle created at address by the shaft and sole of the club. A proper lie angle is one where the sole of the golf club is parallel with the ground at impact. If the clubhead is raised, a hooked shot could result. Conversely, if the heel of the club is raised, a sliced or pushed shot could occur.

What is the shaft flex of a golf club?

Consider the shaft flex of your club. There are three main flexes for men: regular, stiff and extra-stiff. If you swing the club fast, you will hit the ball harder, requiring a stiffer shaft. If you find you are hooking the ball high in the air, your shaft is likely too flexible.

Why do women's golf clubs fly low?

If the shaft is too stiff , the ball will often fly low with a slice. Women's clubs are generally produced with more flexibility, reflecting a less-powerful swing. For women who have low handicaps, however, stiffer shafts are recommended.

Why is it important to use golf clubs?

Your clubs should complement your size, physique, golfing ability, gender and style of swing. Many golfers head to a golf retail store or pro shop and buy clubs right off the shelf, missing out on the benefits of clubs that are geared to their body and skill level.

How to know if a grip is too big?

First, the length of your whole hand, measured from the tip of your middle finger to the base of your hand, and second, the length of your longest finger . Ideally, your middle two fingers should lightly touch the fleshy pad at the base of your thumb. If they do not touch at all, the grip is likely too big. If you find you are digging your fingers into your palm, that is an indication of a grip that is too small for your hand.

What material is a clubhead made of?

Consider a shaft material that will work best for you. The two basic types are steel and graphite. Also take into consideration the type of material the clubhead is made from. Today's modern driver is manufactured using a large variety of construction techniques and metals.

Golf Club Size Guide: How to Choose the Right Size

In order to select the right size golf clubs, you need to consider some factors, the most important one being your height. To account for this, manufacturers design golf clubs in various sizes.

Golf Club Size Factors To Consider When Choosing New Clubs

The loft angle is the angle that falls between the ground and clubface. It determines the trajectory of the golf club. A higher loft angle indicates a higher trajectory but a shorter distance. A lower loft angle will have a lower ball trajectory but more distance.

Driver Length For Shafts (How to Choose the Right Driver Length)

If you’re a beginner golfer, your driver shaft is probably too long. That can make it difficult to hit the golf ball solidly at impact, causing you to miss more fairways than you want. It’s no wonders tour pros find it easy to consistently get distance off the tee. Their driver shaft length is shorter and just at the right length.

Iron Length For Shafts (Club Length Chart)

When selecting a club iron, the right shaft length is extremely important. The length of the club and shaft should match your height and posture so as to make the game more enjoyable while making you a better golfer. Your skill level, swing style, and swing speed should tally with the club you’re playing with.

How to Choose the Proper Wedge Length For Shafts

Wedges are some of the most played clubs on the golf course and most golfers carry three, including pitching, sand, and gap wedge. If you’re looking for a new set, you need to consider your skill level and body size, so you can choose the right wedge size. Here is a guide on how to do that:

Woods Length For Shafts & Our Recommendation

The most common fairway wood on the golf course is 3-wood and 5-wood. 3-wood clubs come with a standard length of 43″ while 5-wood clubs have 42″. The right size and length of wood for each golfer are different.

Putter Length For Shafts (And How to Measure Putter Length)

When putting, you want to make sure you feel comfortable. If you’re holding your putter and it doesn’t feel right, you won’t be able to putt well. You also want to make sure that your eyes are over the ball. That’s what the right putter length will do for you.

What is the lie angle of a golf club?

Ensure that the lie angle of the club is correct. The lie angle is the triangle created at address by the shaft and sole of the club. A proper lie angle is one where the sole of the golf club is parallel with the ground at impact. If the clubhead is raised, a hooked shot could result. Conversely, if the heel of the club is raised, a sliced or pushed shot could occur.

What is the shaft flex of a golf club?

Consider the shaft flex of your club. There are three main flexes for men: regular, stiff and extra-stiff. If you swing the club fast, you will hit the ball harder, requiring a stiffer shaft. If you find you are hooking the ball high in the air, your shaft is likely too flexible.

Why do women's golf clubs fly low?

If the shaft is too stiff , the ball will often fly low with a slice. Women's clubs are generally produced with more flexibility, reflecting a less-powerful swing. For women who have low handicaps, however, stiffer shafts are recommended.

Why is it important to use golf clubs?

Your clubs should complement your size, physique, golfing ability, gender and style of swing. Many golfers head to a golf retail store or pro shop and buy clubs right off the shelf, missing out on the benefits of clubs that are geared to their body and skill level.

How to know if a grip is too big?

First, the length of your whole hand, measured from the tip of your middle finger to the base of your hand, and second, the length of your longest finger . Ideally, your middle two fingers should lightly touch the fleshy pad at the base of your thumb. If they do not touch at all, the grip is likely too big. If you find you are digging your fingers into your palm, that is an indication of a grip that is too small for your hand.

What material is a clubhead made of?

Consider a shaft material that will work best for you. The two basic types are steel and graphite. Also take into consideration the type of material the clubhead is made from. Today's modern driver is manufactured using a large variety of construction techniques and metals.