...
| Length Based Chart | ||
|---|---|---|
| Height | Height | Length Factor |
| 6-3 to 6-6 | 191 - 198 | Add 1" |
| 6-0 to 6-3 | 183 - 191 | Add 1/2" |
| 5-9 to 6-0 | 175 - 183 | Standard Length |
What size golf clubs do I Need?
15 rows · Apr 01, 2022 · Golf Club Size Guide: Irons. For the most accurate assessment, you should use the standard ...
Are all golf clubs the same size?
How to Determine the Right Golf Club Size 6ft 9″ – 7ft 0″, Add 2″ to Standard Length 6ft 6″ – 6ft 9″, Add 1 1/2″ to Standard Length 6ft 3″ – 6ft 6″, Add 1″ to Standard Length 6ft 0″ – 6ft 3″, Add 1/2″ to Standard Length 5ft 9″ – 6ft 0″, Standard Length 5ft 6″ – 5ft 9″, Subtract 1/2″ from Standard ...
What length golf clubs for a 6'2 man?
Sep 21, 2018 · Golf Club Size Guide: Irons. To choose irons for your height, Golf Monthly recommends using the golf club size guide below: 6ft 9″ – 7ft 0″ Add 2″ to Standard Length. 6ft 6″ – 6ft 9″ Add 1 1/2″ to Standard Length. 6ft 3″ – 6ft 6″ Add 1″ to Standard Length. 6ft 0″ – 6ft 3″ Add 1/2″ to Standard Length. 5ft 9″ – 6ft 0″ Standard Length.
How to choose the right golf clubs?
And now, it has been increased to 45 inches for men (although the range is between 45 and 45.75 inches). While the shaft length for ladies drivers is 44 inches. However, I would like to share my honest opinion here. The driver shaft length, even though important, is not the only determinant.
Does a 6'3 golfer need longer clubs?
It's sometimes interesting but a golfer could be 6'3” with very long arms, and they will be just fine playing with standard length golf clubs.
What size clubs do I need if im 6 2?
What length golf clubs do I need for my height?
| OVERALL HEIGHT | GOLF CLUB LENGTH ADJUSTMENTS |
|---|---|
| 5'7″ to 6'1″ | standard length in inches |
| 6'1″ to 6'2″ | plus 1/4″ |
| 6'2″ to 6'4″ | plus 1/2″ |
| 6'4″ to 6'6″ | plus 1″ |
How long should your golf clubs be if your 6ft tall?
For example, if you are 6-feet tall and your wrist-to-floor measurement is 35 inches, a standard length driver -- 44 inches for a steel shaft driver and 45 inches for a graphite shaft driver -- would be appropriate.Dec 11, 2018
What size golf clubs do I need if I'm 6 3?
...
| Length Based Chart | ||
|---|---|---|
| Height | Height | Length Factor |
| 6-3 to 6-6 | 191 - 198 | Add 1" |
| 6-0 to 6-3 | 183 - 191 | Add 1/2" |
| 5-9 to 6-0 | 175 - 183 | Standard Length |
What height is Tiger Woods?
What is standard golf club length?
Does golf club length matter?
How long should my driver be 6 2?
| Height (feet/inches) | Wrist-to-Floor Measurement | Driver Shaft Length |
|---|---|---|
| 6'2″-6'4″ | 38.5″-40″ | 46.25″ |
| 6'1″-6'2″ | 37″-38.5″ | 46″ |
| 5'7″-6'1″ | 34″-37″ | 45.75″ |
| 5'4″-5'7″ | 32″-34″ | 45.5″ |
What happens if your irons are too long?
How do you measure wrist height for golf clubs?
Are All Golf Clubs The Same Size?
Not all golf clubs are the same size. Part of what helps golfers get distance is by varying the length of the golf club shaft. The longer the shaft...
Why Do Golf Club Sizes Matter?
Golf club sizes can make all the difference in your ability to perform on the golf course. If a golf club is too long or too short for you, then th...
Are Custom Fittings Worth It?
Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that y...
Can I Adjust My Own Golf Club Sizes?
If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them....
How tall should a golf club be?
The table below tells you how much you should add or subtract to this length. Height Range, Golf club length to use. 6ft 9″ – 7ft 0″, Add 2″ to Standard Length.
Do pro golfers use hybrid clubs?
Contrary to many people’s opinions, pro golfers use hybrids a lot. Hybrid clubs have longer iron shafts than standard-sized golf clubs. Hybrid clubs could be where the solution to most if not all of your problems at the golf course lies. For example, they can help you hit higher. Listen to your gut instinct.
What is a putter in golf?
The putter is the club in your pack that enables you to get the ball in the hole. The goal in any successful game is to get the ball in the hole with as few strokes as possible. For a golf putter to work for you, it has to be the right length for your height.
Golf Club Size Guide: Irons
To choose irons for your height, Golf Monthly recommends using the golf club size guide below:
Golf Club Size Guide: Driver
In theory, the longer the driver shaft length, the greater the shot distance. Therefore, the longer the driver the better, right? Well, the reality is actually quite different.
Golf Club Size Guide: Putter
When it comes to purchasing a putter, control and accuracy are imperative if you want to get the ball into the hole with the first – or at least with the lowest number of strokes possible.
How long is a golf club shaft?
The maximum shaft length allowed by the rules of golf is 48 inches. Not every top player plays with the longest shaft around. It all depends on their style.
What happens if you tailor your golf clubs?
If you tailor your clubs or if you order a set of clubs at a different length from those which you have been using, the clubs will be affected in other ways.
How long is a standard length?
Between 5 feet 9 inches and 6 feet – You will be suited to a standard Length. Between 5 feet 6 inches and 5 feet 9 inches – Subtract half an inch from the standard length. Between 5 feet 3 inches and 5 feet 6inches – Subtract one inch from the standard length.
What happens if your putter is too short?
If your putter is too short, you will get too close to the ball, and this can mean the heel of your putter lifts off the ground, and you will not hit the ball well. The shaft length on your putter should enable you to get your eyes directly over the ball just before you take your shot.
Why is the lie angle important?
The lie angle is vital in all clubs, but it is crucial in the irons in your golf set. This is because the club has a higher loft on the clubhead, so the effect is more significant if the lie is out. A good club fitter can usually adjust the lie angle by altering the hosel on the iron.
How tall is a 5'10 golfer?
In the chart above, we can see that a 5' 10" male on average will have a WTF measurement just shy of 34 1/4", while the average female that stands 5' 4" would be just a hair over 31 ¼". The 6" difference in height equals approximately a 3" difference in the WTF measurement and to 1" length change. Well, at least in theory between men and women stock clubs. If you consider that a 48" junior golfer has a WTF measurement of nearly 12” less than the 70" golfer would suggest that the junior golfer get a 5-iron that is 4" shorter than a typical men’s club. However, the math does not add up as most junior charts will suggest a 48” junior to have a 5-iron in the neighborhood of 9" shorter.
What is the average lie angle for a 5 iron?
A common lie angle for a 5-iron is 61° , therefore the length of the 5-iron may be 37.25" to achieve the B length. This combo may be very well for a lady golfer that is 5' 8" with a 33.25" WTF measurement. A C6.5 swingweight would be perfectly normal in what you would see in a standard length woman stock set. However, let’s say this was a man we were talking about that might have the same proportions of the lady golfer, or perhaps taller but with long arms. Instead of the shorter club with the lighter swingweight, the clubfitter or manufacturer may suggest a 38” 5-iron that had a 2° flatter lie angle. This would make the swingweight in the normal range you would see for a male golfer.
What is WTF in golf?
Wrist-to-floor measurement or WTF for short is a common method in which the golfer stands with their feet together in street / tennis shoes with their arms hanging straight down and relaxed. Then someone measures from the floor to the crease just above the wrist.
Can you buy jeans without trying them on?
If that person knows what their waist and inseam measurements are, they can purchase a pair of jeans that will most likely fit (but not always) without having to try them on. Then the jeans can be selected or paired down based upon the color/finish and leg cut, both of which are personal preferences.
Benefits of Golf Club Sizing
We all come in different shapes and sizes. Your golf clubs will perform best for you if they match your stature from the ball.
Golf Club Length Chart: Standard sizes for different clubs
The ideal club length is all about the performance, although there are certain standard sizes for all club types available at retail. Check below Golf Club Size Guide for men.
How to Fit Golf Clubs? – Different Methods to determine ideal Club Length for you
Player height is the first thing to look at in a club fitting and there are brackets that recommend lengths based on this. This is normally considered before hitting any golf balls in a Static Fit.
Final Thoughts
If you’re looking at going for a club fitting, make sure they are measuring the right things and are invested in improving your game.
What is the lie angle of a golf club?
Ensure that the lie angle of the club is correct. The lie angle is the triangle created at address by the shaft and sole of the club. A proper lie angle is one where the sole of the golf club is parallel with the ground at impact. If the clubhead is raised, a hooked shot could result. Conversely, if the heel of the club is raised, a sliced or pushed shot could occur.
What is the shaft flex of a golf club?
Consider the shaft flex of your club. There are three main flexes for men: regular, stiff and extra-stiff. If you swing the club fast, you will hit the ball harder, requiring a stiffer shaft. If you find you are hooking the ball high in the air, your shaft is likely too flexible.
Why is it important to use golf clubs?
Your clubs should complement your size, physique, golfing ability, gender and style of swing. Many golfers head to a golf retail store or pro shop and buy clubs right off the shelf, missing out on the benefits of clubs that are geared to their body and skill level.
How to know if a grip is too big?
First, the length of your whole hand, measured from the tip of your middle finger to the base of your hand, and second, the length of your longest finger . Ideally, your middle two fingers should lightly touch the fleshy pad at the base of your thumb. If they do not touch at all, the grip is likely too big. If you find you are digging your fingers into your palm, that is an indication of a grip that is too small for your hand.
How to measure grip size?
First, the length of your whole hand, measured from the tip of your middle finger to the base of your hand, and second, the length of your longest finger.
What material is a clubhead made of?
Consider a shaft material that will work best for you. The two basic types are steel and graphite. Also take into consideration the type of material the clubhead is made from. Today's modern driver is manufactured using a large variety of construction techniques and metals.
What is a driver made of?
Today's modern driver is manufactured using a large variety of construction techniques and metals. Most drivers are made of steel, but many popular clubs are made of titanium, a lighter material, allowing the clubhead to be bigger and thus more forgiving. Titanium is also harder than steel.
How tall is a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf ...
How to measure your height?
Step 1. Measure your height standing in socks. For the most accurate measurements, don't try to measure yourself. Ask a second person to assist you. Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down.
Where is Jackson Lewis?
Based in Memphis , Jackson Lewis has been writing on technology-related material for 10 years with a recent emphasis on golf and other sports. He has been freelance writing for Demand Media since 2008. Lewis holds a Master of Science in computer science from the United States Naval Postgraduate School.
