Many shaft manufacturers pre-trim the tips of their 0.355" tapered iron shafts to discrete lengths (ex. decreasing in length from #3-PW). 0.370" parallel iron shafts arrive in uncut lengths, usually 41" or 42" for irons or 46" or more for woods.
How long is a driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
What is the standard driver length for golf clubs?
The standard driver length for men's clubs is 45.5" to 45.75" inches long. Because women tend to be shorter than men, the standard women's driver length is usually closer to 44". The 2020 TaylorMade SIM2, Callaway EPIC, PING G425, and Titleist TSi1 come configured at 45.75" off the rack.
Should you measure the shaft length of your golf clubs?
It’s a good idea to measure the shaft length of all the golf clubs in your bag and save them for future reference. A short driver shaft may help you hit a straight shot better and also hit the center of the face more than you usually do. Moreover, a short shaft helps you gain better control.
What is the best golf shaft size for women?
Alternatively, if you have a standard 45 inches graphite driver, then your 5-iron shaft will size at 38.5 inches and the sand wedge at 36 inches. All these sizes will be an inch lesser for women golfers.
How long is an uncut driver shaft?
Most shafts are 46" long uncut. Trimming from the butt has little to no effect as it is designed to be cut from that end, as long as you don't go crazy short. Trimming from the tip will stiffen the feel of the shaft and gradually reduce launch angle and spin.
What does uncut driver shaft mean?
Wishon explained: "When golf shafts are manufactured and shipped to clubmakers and clubmaking companies, they are in what is called a raw, uncut form. From this form, the clubmakers have to cut the shaft, often from both the tip and grip ends, to properly install it into each clubhead."
What size is a standard driver shaft?
45 to 45.75 inchesAlmost all drivers being introduced by manufacturers now feature a shaft length of 45 to 45.75 inches. Though some manufacturers have introduced drivers with shaft lengths longer than 46 inches, few have been successful.
What is the diameter of a golf club shaft?
Design. The shaft is roughly . 58 inch/14.7 millimeters in diameter near the grip and between 35-48 inches/89–115 cm in length.
What is a 5.5 flex shaft?
Regular – 5.0. Regular Plus – 5.5. Stiff – 6.0. Extra Stiff – 6.5. Extra Stiff Plus – 7.0.
How long should my driver shaft be for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
How are driver shafts measured?
Simply hold your golf club at 45 degrees to the ground or as in your playing position. At this point take a golf club ruler or take measure and place under the sole of the club. Measure to butt of grip. This will give you you an accurate and USGA standard for measuring your golf driver.
Is a 43 inch driver too short?
Tall golfers have found that they're able to play well with a 44 inch driver while shorter players are better off using a 43” driver. There are golfers who have had better control, lesser misses or slices and gained extra distance by about five yards when using a 44” driver when compared to a 43 inch driver.
What is the standard length of a men's golf driver?
around 45 inchesStandard, off-the-rack drivers usually check in around 45 inches, while the USGA limits driver length to 48 inches for its competitions.
Are all golf driver shafts same diameter?
For standard size shafts for adult players, this will usually be around 0.600", (or larger if it's a bubble shaft). The butt diameter is important to note because you'll want to match that measurement as closely as possible with the core size of the golf grip.
What is an amateur golf shaft?
Senior. These are the amateur or medium shafts, denoted “A” or “M”. Usually recommended for golfers who fall in the senior bracket. Typically with driver swing speeds around 75 to 85 mph.
How do you measure the width of a golf shaft?
Measure your shaft tip using a golf shaft identification gauge by placing the shaft tip into the hole that fits most snugly and reading the number that is by that hole. The tip thickness range is from . 270 to . 370 inch.
How long is a golf driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
How to narrow down a golf shaft?
The best way to narrow down on the right shaft is to do test shots on the range with drivers of varying lengths. The right shaft length will help you to hit the golf ball with the driver much the same way that you would do with a wedge.
Why is grip size important?
Grip size is just as important as the size of the shafts of your driver and other golf clubs for a perfect game. Big grip size can inhibit your wrist release through the impact area and cause a fade or a block.
How to shorten a golf club shaft?
Remove the grip from the driver using a hook blade or a utility knife, as well as the grip tape on the shaft. Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker. Fix the golf club in position in a vise.
How to make a golf club more upright?
By increasing or decreasing the shaft length by an extra half an inch will result in the club playing 1 degree more upright, or flat respectively. With a standard-length club, tall players tend to stoop quite a bit while short players will find themselves having to stand in a more upright position than required.
What is the difference between the length of the golf club and the length of the clubhead?
The length of the golf club’s shaft in relation to the overall length of the club defines the length of the driver shaft. Alternatively, this is the difference between the length of the overall golf club and the length of the clubhead. Generally, the longer your driver shaft is, the more difficult it becomes to have control over ...
When you shorten your golf shaft, do you keep in mind the after effects?
When you have decided to shorten your golf shaft, you must keep in mind the after-effects of doing so. How much and where you cut off the shaft has different effects on the golf club.
Driver Shaft Length Plays a Role in Distance & Accuracy
You may have heard that the longer your driver shaft length, the further you can hit the ball. While this popular saying is technically true, golfers should not automatically opt for the longest shaft length they can find. Why?
What is the Standard Driver Shaft Length?
Generally speaking, the standard men’s driver shaft length is 45.75″ off the rack with no customizations. Standard women’s driver shafts are between 43.75″-44.75″. These are averages and can vary plus or minus 1″ depending on the manufacturer.
Driver Shaft Length Height Chart
As a general rule, taller golfers will need a bit longer of a driver shaft. For example, PGA phenom Rickie Fowler is only 5’9″ and swings one of the shortest drivers in pro golf at 43.5 inches. Tony Finau is one of the tallest golfers on the PGA Tour at 6’4″, and his driver’s length is usually around 45 inches.
Should I shorten the length of my driver?
Have you ever been in a real slump with your driver? What did you do to pull yourself back into a better groove on the tee box? You might have started teeing off with your 3-wood instead of your driver and were amazed at how much easier it was to find the fairway.
A Final Word Before Heading to the Clubhouse
Before tinkering with the shaft length of your driver, ask yourself if a change is really necessary. Many golfers are known to overthink even the most minute details about their game so beware of this flaw. Too often, golfers are out to improve a certain facet of their game that does not need improvement.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Sony Open Pics from January 11, 2022 Part 1
I was able to get out to the Sony Open today to take a few pics. I guess due to Covid precautions they kept the spectators pretty far from the players. Also due to camera...
Cobra 2022 Plans
Anyone have info on Cobra's plans for the upcoming release season? I know the blades are new and assume the King Tours are sticking around for another year (or...
What's the Standard Driver Length
The standard driver length for men's clubs is 45.5" to 45.75" inches long. Because women tend to be shorter than men, the standard women's driver length is usually closer to 44".
What Length Driver Do the Best Club Fitters Recommend for Most Golfers?
In our experience getting fitted and what we've gathered talking to and researching what club fitters have to say about driver length, most of the best club fitters recommend drivers very close to the standard length for most golfers.
How Long Are PGA Tour Professionals' Drivers?
PGA Tour Professionals tend to play drivers between 44-46" in length. The vast majority of pros are in the 44.5" to 45.75" range from what we've been able to gather.
How Long Should Your Driver Be?
As we mentioned at the start of this article, the best driver for you has the optimal balance of distance and accuracy.
Don't Cut Down a Driver Without Making Weight Adjustments
Many golfers wanting to try a shorter driver think they can simply have their shaft cut down, but this is not the case if you want it to feel anything like a normal driver.
Making a Case for a Driver and "2-Wood" In Your Bag
It's starting to become popular having both a Driver and a "2-wood" in the bag.
Final Thoughts
We've covered a lot in this guide, but ultimately it's on you to test out different clubs and find out what's right for you.
Where should the ruler be when measuring golf driver shaft length?
Thirdly, you will place the straight edge ruler against the upright golf driver. The ruler should be vertical to the ground when you measure driver shaft length and the ruler should touch the top of the golf driver.
Why is it important to measure driver shaft length?
Having the right length for your golf shafts is so important because it helps with controlling the distance of golf shots. Additionally, a correctly fitting shaft length will help to develop consistency ...
How long is a golf club?
What Is The Length Of A Golf Club? For a driver the length can be up to 48 inches. However, the typical length would be around 45.5 inches. Other golf clubs in the bag are shorter than the driver and go down to around 35 inches for a lob wedge and 32 inches for a putter.
Why does height matter in golf?
Does Height Matter For Golf Clubs? Height matters for golf clubs because it impacts your swing and your positioning. Shorter players require shorter clubs due to their shorter arms. The longer your arms, the longer the clubs you will need – so a taller player will need proportionately longer clubs as well.
Weight
The weight of your shaft is going to primarily affect your distance. A heavier shaft will reduce your clubhead speed and thus the amount of energy transferred into the ball.
Kickpoint
Depending on the kickpoint, your shaft will bend closer to the head or the grip of the club.
Torque
Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting.
Cost
It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300.
Conclusion
Fitting yourself for a driver shaft is a bit like trying to do your own plumbing. You could do it yourself but if you get something wrong then you might end up in the water.
