What kind of lug nuts do I need for my golf cart?
These simple Acorn style lug nuts come in Chrome and Gloss black colors to match your aluminum golf cart wheels on your EZGO, Club Car, Yamaha Golf Carts, or GEM Cars. If you are looking for a more narrow lug nut that is more theft resistant and includes a lug nut key, check out our Spline Golf Cart Lug Nuts!
How do you adjust the governor on a Yamaha G2 golf cart?
The following methods show you how to adjust the governor on your Yamaha G2 golf cart. Locate the lever present above the transaxle. This lever houses a 10mm nut. Tighten the nut or move it inwards as much as you want based on the desired speed using a 1/4″ drive ratchet with a 10mm deep socket.
How do you adjust the clutch cable on a golf cart?
Locate the cable nut that holds the cable to the throttle lever for a clutch cable governor. Adjust the main cable nut, holding it in place with the screwdriver. Turning the nut counter-clockwise will make the cable longer, allowing the cart to go faster. Turning the nut clockwise will reduce the vehicle's top speed.
Will my Yamaha Lugnuts work for EZGO?
If you have a Yamaha you would choose the "Yamaha" button before adding them to your cart. Yamaha lugnuts are metric 12x1.25 Will these work for EZGO? Yes, you just need to select the Club Car / EZGO option before adding to cart. What size and thread are the SAE size for Club Car? I need 1/2" x 20 thread.
How do you take the governor off a Yamaha golf cart?
General InstructionsDetach the cable from the carburetor. The cable is about the width of a straw. ... Follow the disconnected cable up to the governor. ... Disconnect the gas pedal cable from the governor and reroute it to the carburetor. ... Using your wrench, remove the bolt on the gas pedal shaft.
How do you adjust the governor on a Yamaha golf cart?
0:005:15Yamaha G29 Drive Golf Cart Governor Adjustment - MORE SPEED!!YouTubeStart of suggested clipEnd of suggested clipItself by tightening this nut down you're putting more pressure on the spring. So that the governorMoreItself by tightening this nut down you're putting more pressure on the spring. So that the governor has to work harder to pull back on the throttle.
What size nut is on a golf cart wheel?
The 4×4 is the basic and standard size for every golf carting vehicle. Do not over tighten nut to prevent it from the breakdown and regular oiling in the parts is recommended to save it from rust. Use the right tool to open the bolt.
Do Yamaha golf carts use metric lug nuts?
0:201:11Golf Cart Lug Nut Sizes for EZGO, Yamaha, Club Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you own a yamaha or a star golf cart your cart uses metric sized lug nuts most carts use one ofMoreIf you own a yamaha or a star golf cart your cart uses metric sized lug nuts most carts use one of these two sizes.
How do you adjust the governor on a Yamaha 2021 golf cart?
1:294:32Yamaha Drive 2 Quietech Governor Adjustment - GET MORE SPEEDYouTubeStart of suggested clipEnd of suggested clipLeft from where the bottom of the nut is at so to do that i like to use a ratcheting wrench that youMoreLeft from where the bottom of the nut is at so to do that i like to use a ratcheting wrench that you can just put right on the end of that nut. And then just start tightening. It.
How do you remove a speed limiter from a golf cart?
0:000:46How to remove governor on a Club Car golf cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the farther you bend that normally the faster it goes and then that's it basically when you wantMoreSo the farther you bend that normally the faster it goes and then that's it basically when you want to return your heart you just bend that back down and go back to normal speed.
How do you remove golf cart lug nuts?
0:471:47How To Take Off Remove A Golf Cart Wheel - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not it's tight but it's not lifting. Any pressure off the tire make sure your um emergencyMoreIt's not it's tight but it's not lifting. Any pressure off the tire make sure your um emergency brake is on chalk the wheels etc safety first here um and so what i do is i'll just sit this on there
Are all golf cart wheel bolt patterns the same?
Whether you own a Club Car, Columbia, E-Z-GO, Harley Davidson, Par Car, Star EV, or Yamaha golf cart, they all have standard bolt patterns for the wheels they roll on. Unlike cars or trucks it is quite easy to pick out a wheel or rim that will fit your golf cart.
What is the bolt pattern on a EZ Go golf cart?
4x4What size bolt pattern are the golf cart wheels you sell on this site? The golf cart wheels sold on this site all have a bolt pattern of 4x4 (4 inches by 4 inches, or 101.6mm apart). This is standard on all golf carts (Yamaha, Club Car, EZGO, Par Car, STAR EV, Harley Davidson, etc.).
Where is the governor on a Yamaha electric golf cart?
1:012:57Yamaha G29/DRIVE Governor Speed Increase | ASK DAVE | Golf Cart ...YouTubeStart of suggested clipEnd of suggested clipAnd locating the governor under the service panel in the rear above the engine. For reference it'sMoreAnd locating the governor under the service panel in the rear above the engine. For reference it's just opposite the driven clutch at the rear of the engine. Compartment.
How fast can a Yamaha golf cart go?
19 mphMost electric golf carts are faster than gasoline golf carts. Although, new gasoline and electric golf cart versions of Yamaha all have the same top speed. The top speed of both versions of Yamaha golf carts is 19 mph (31 kph).
How do you adjust the speed on a golf cart?
Tighten the governor spring located in the engine of most golf carts to adjust your cart's top speed. 90% of EZ Go Carts have simple springs which limit the speed of the engine. To raise the top speed of your golf cart, all you need to do is locate this spring and tighten it slightly.
How can I make my gas golf cart go faster?
How to Make Your Gas-Powdered Golf Cart Faster [Updated, 2022]1 Use A Better Golf Cart Battery.2 Increase Torque.3 Upgrade the Golf Cart Motor.4 Install a Torque Converter.5 Install a Higher-Performance Clutch.6 Tweak The Governor.7 Install A Cold Air Intake.8 Get Bigger Golf Cart Tires.More items...•
What are the governors on a Yamaha golf cart?
The three types of governors in Yamaha models include spring adjustment, clutch cable, and spark regulation governors.
How to make a golf cart go faster?
To make a golf cart go faster, you can also consider installing a new engine. Always consult the owner's manual for the Yamaha golf cart model you have. Every model has limits to how fast it can physically go without engine damage or failure resulting. To make a golf cart go faster, you can also consider installing a new engine.
How to start a golf cart with a gas pedal?
Locate the gas pedal that is fitted to the governor and remove the connection. Re-route the gas pedal to the carburetor. Remove the bolt present on the shaft of the gas pedal. Slide the shaft upwards so that the gas pedal has more play. Tighten the bolt and start the golf cart.
Where is the governor arm on a golf cart?
Locate the governor arm of the golf cart. This is mounted above the rear axle housing and under the cart. Depending on the cart model, there may be a protection plate above the governor.
How fast is an EZGO golf cart?
The top speed of an EZGO golf cart is usually 19.9mph and the average speed is 14mph to 15mph. With governor adjustment, the EZGO cart can go faster by 5 to 10mph.
What is a golf cart governor?
A golf cart governor is a mechanical device that helps in controlling the maximum speed of the cart when it moves on flat ground. This device prevents the engine RPMs from increasing beyond the recommended specifications.
How to change the speed of a golf cart?
Locate the spring on the differential or carburetor that helps in changing the cart speed by adjusting its tension. Increase the length of the cable that is fitted on to the body of the throttle and clutch of the two-stroke engine.
How to ride a golf cart at full speed?
Ride the cart at full speed over a course of known length. This will ensure that the governor controls the speed of the cart within factory specifications. Fasten the black plastic cover and put the seat back in place. Take care when tightening the nut. The more you tighten, the faster your cart will go.
Can you remove a golf cart governor?
It doesn’t take much time or skill to remove a golf cart governor. With some basic mechanical expertise and general-purpose tools, you can do this yourself. The process is more or less the same in all golf carts.
