What size are golf cart lug nuts?
The average hex size for a golf cart lug nut is 3/4 inch but again they can be bigger. The reason for this size is because of the thread of wheel studs. This size is the industry standard.
What size socket do I need for a lug nut?
The standard size socket or wrench you will need is 3/4 inch. If your lug nuts are on the metric system, they can range in any size of millimeter. Depending on the size and depth of your wheel, you may need a deep socket or extender.
What size are EZGO lug nuts?
The standard size of lug nuts used in a EZGO golf cart is 1/2″ – 20 TPI. TPI wheels lug nut are better because they are cold forged to meet superior strength and durability. The set of 16 high quality lug nuts are required as they are located on the wheel. They’re used to secure a wheel to threated wheel studs. What size are EZGO castle nuts?
What is a castle nut on a golf cart?
The castle nuts serve as a locking device. The castle nut is on a golf cart is very important for the final assembly are used to tie rods and on Ball joints. Castle nuts should be oiled regularly to maintain better functionality of the golf cart.
What size are golf cart lug nuts?
All the standard golf carts like EZGO, Club Car and Yamaha are equipped with 4X4 nuts that are 4 inches by 4 inches, set to be 100 mm apart.
How do you remove golf cart lug nuts?
0:281:47How To Take Off Remove A Golf Cart Wheel - YouTubeYouTubeStart of suggested clipEnd of suggested clipUm you can kind of turn these just a little bit. And then that way when you jack up the wheel. SoMoreUm you can kind of turn these just a little bit. And then that way when you jack up the wheel. So it's off the ground. You can just slide it right.
Are ezgo lug nuts standard or metric?
0:001:11Golf Cart Lug Nut Sizes for EZGO, Yamaha, Club Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you have any american-made golf cart such as an easy go or a club car your cart uses standardMoreIf you have any american-made golf cart such as an easy go or a club car your cart uses standard size lug nuts.
What size are the lug nuts on a club car?
1/2"-20Lug nut. 1/2"-20. For Club Car Gas and Electric 1974-up DS & Precedent golf cart.
How do you remove a wheel from a cart?
0:071:23How To Replace Toter® Cart Wheels - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the head of the screwdriver on the tab. And with your hammer hit the screwdriver at leastMorePlace the head of the screwdriver on the tab. And with your hammer hit the screwdriver at least twice rotate the pelvis. And repeat pull off the pal nut.
Are golf cart lug nuts the same as cars?
Most American-made cars, such as EZGO and Club Car, use standard lug nuts, while Yamaha, Hyundai, and other imported cars use metric.
Do Yamaha golf carts use metric lug nuts?
16 Chrome Lug Nuts (Metric Threads 12mm-1.25, OD 3/4″) Fits ALL Yamaha Golf Carts ( Or any other cart with Metric Threads)
What is a lug bolt?
Lug bolts or lug nuts are a type of bolt designed to keep the wheels on a vehicle. There is no one size to fits us all, but there is a limited number or thread size which makes things easier. Furthermore, lug nuts vary from vehicle to vehicle, meaning you will have specific nuts a specific manufacturer used. Below you can see a table ...
Do you need a socket for lug nuts?
For each type of lug nut, you do need specific or suitable socket size. They also come in various sizes, as you would expect, but there are 5 most common ones. They are socket sizes most car mechanics need and have been using. You need according to the vehicle you have. If you have multiple cars, you need multiple sockets.
What size nuts are used in a golf cart?
3/4″ sized nuts are used in the axle of a EZGO golf cart. Don’t over tighten the nut as it will result in slipping of the axle and can cause damage to the complete axle set. Oiling is very important to prevent the axle from rusting and slipping.
How to fix loose lug nuts on golf cart?
A lug wrench can be an effective tool to fix loose lug nuts on a golf cart. Open the lug nuts while the wheel is on a even surface and making full connection with the ground. After opening the nuts change them with the new nuts. Check the frame of the wheel – if it is out of shape then change the frame.
How many holes are in an EZGO TXT bolt pattern?
EZGO TXT bolt pattern is 4×4 (4 inches by 4 inches, or 100mm apart). When measured diagonally, the wheel has 4 holes spaced out. This is the standard bolt pattern which comes with all the carting vehicles.
Why are TPI lug nuts better than other lug nuts?
TPI wheels lug nut are better because they are cold forged to meet superior strength and durability. The set of 16 high quality lug nuts are required as they are located on the wheel. They’re used to secure a wheel to threated wheel studs. 16 units per package. Material – alloy steel.
Why does my EZGO golf cart keep spinning?
The reason the castle nut keeps spinning on a EZGO golf cart is because the nut is too tightened on the slip axle. This means the grip on the axle has worn and the axle needs replacing. Spinning can occur due to too much pressure applied and overtightening of the nut.
What size castle nut is used on a EZGO golf cart?
The standard size of the castle nut on a EZGO TXT golf cart is 1.2 inches X 1.05 inches X 0.65inches. It is usually made up of alloy steel designed specifically for EZGO brand.
How to remove lug nuts?
Steps to remove lug nuts. Park the vehicle in the level surface the wheel stays completely on the group evenly. Remove the cap placed on hub and try locating the lug nut in your vehicle. The hubcap needs to be removed for accessing the lug nut. Check the lug nut before the removal process.