When replacing golf grips with traditional grip tape that deactivates with the application of golf solvent, many other volatile liquids will work as well. Mineral spirits, denatured alcohol, acetone
Acetone
Acetone, or propanone, is the organic compound with the formula₂CO. It is a colorless, volatile, flammable liquid and is the simplest and smallest ketone. Acetone is miscible with water and serves as an important solvent in its own right, typically for cleaning purposes in laboratories. About 6.7 …
What can I use instead of Golf Grips?
1 Overview. Replacing your own golf grips is easy, rewarding and can save you a lot of money. ... 2 Paint Thinner / Mineral Spirits. Paint thinner or Mineral Spirits are cheap alternatives to grip solvent and also dry quickly. ... 3 Rubber Cement. Another affordable substitute is rubber cement. ... 4 Water. ... 5 Air Compressor. ... 6 WD-40. ...
Should I use paint thinner or mineral spirits for grips?
If you have other uses for paint thinner or mineral spirits then the regular stinky stuff (some are not as stinky as others) should work fine on grips. I really don't do enough grips to use other than the supply of grip solvent already on hand. (maybe 10 grips per year) But from now on it will be mineral spirits when a re-supply is needed.
What is the difference between mineral spirits and grip solvents?
Like grip solvent, the mineral spirits will lubricate double-sided tape allowing you to work the grip over the shaft so that it adheres. Mineral spirits dry a bit slower than solvent--usually two to three hours.
What are the best solvents for cleaning a golf grip?
Traditional golf grip solvent is the most versatile and safest to work with. But if you run out of solvent and do not have the time to wait for another shipment, there are plenty of alternative household solvents you can use. Paint thinner or Mineral Spirits are cheap alternatives to grip solvent and also dry quickly.
What can I use instead of golf grip solvent?
Paint Thinner / Mineral Spirits Paint thinner or Mineral Spirits are cheap alternatives to grip solvent and also dry quickly. Like grip solvent, the mineral spirits will lubricate double-sided tape allowing you to work the grip over the shaft so that it adheres.
What liquid do you use to put golf grips on?
Almost every household has a can of WD-40 lying around. This all-purpose lubricant works with double-sided tape or standard grip tape. Make sure to spray the tape and push the grip onto the shaft and adjust as needed. Similarly to paint thinner, this takes a few hours to dry and is very flammable.
Can I use rubbing alcohol to install golf grips?
Step 2: Get rid of old grip tape It's sometimes the most tedious and least fun part of the re-gripping process, but Goo-Gone, Goof-Off, rubbing alcohol, etc., all work to help speed up the process.
Can I use acetone to Regrip golf clubs?
Acetone is also much more dangerous than other things you can use when regripping your golf club. Acetone is more flammable, more toxic and more destructive than lighter fluid which is commonly used for DIY golf club regripping.
What is golf grip solvent made from?
Mineral spirits, organic hydrocarbon solvents made from paraffin, are the most common grip solvent alternatives. Like commercial solvents, mineral spirits dissolve oil and grease, cutting through residue left behind by grip tape. Mineral spirits typically sell for slightly less than golf grip solvent.
How do you rejuvenate golf grips?
3:296:22Make Old Golf Grips Feel New - YouTubeYouTubeStart of suggested clipEnd of suggested clipI just have a bowl of warm slightly soapy water and a basic just sort of old rag old towel. And whatMoreI just have a bowl of warm slightly soapy water and a basic just sort of old rag old towel. And what we can just do is get the towel a little bit damp.
How do you make rubber golf grips tacky?
0:121:12How to Make Golf Grips Tacky - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne is to clean the grip you can clean the grip using just soap and water but be sure to dry it offMoreOne is to clean the grip you can clean the grip using just soap and water but be sure to dry it off or scrape. The grip now you can do this using a pocketknife or a piece of sandpaper.
How do you clean golf grips with Windex?
Using Household Cleaners If you want to give your clubs a thorough cleaning after the warm water and soap, take a household cleaner like Windex and spray it on your grips. This will break up the dirt and oil below the surface and return the grips to almost-new condition.
Can you use white spirit to Regrip golf clubs?
Place the club in the vice with the head pointing up, taking care to use a shaft protector (or similar) to avoid damage as you tighten. Now take one of the new grips, cover the little hole at the end, and pour in a little White Spirit.
Can You Use soapy water to Regrip a golf club?
The only thing it could do is make it slick so the grips would slide right on with little trouble. If that's how it works then how does it work when it dries? The tape couldn't be working as there isn't anything to activate it. Just to let you know, I am NOT using the water activated grip tape, just the regular stuff.
Can you use acetone instead of grip solvent?
An outstanding substitute golf grip solvent is nail polish remover. The main ingredient in nail polish remover is acetone, so that means you can use paint thinner just as easily as you can use nail polish remover.
What do you put on golf club grips?
Here's a link to their offer.SECURE THE SHAFT. Use a vise to secure the shaft near the tip of the grip using a protective rubber vise clamp. ... REMOVE THE OLD GRIP. ... MEASURE FOR TAPE. ... APPLY THE TAPE. ... CLEAN WITH MINERAL SPIRITS. ... POUR MINERAL SPIRITS OVER. ... APPLY THE GRIP. ... FINAL PLACEMENT.
How to replace golf club grips?
The traditional method of replacing golf club grips requires the use of a volatile solvent. This liquid is applied to the inside of the golf grip and over the grip tape, which bonds the grip to the club shaft. The solvent temporarily deactivates the adhesion of the grip tape to give you time to install the grip onto the shaft. While special golf grip solvent is available, other materials can be used as well, some of which are safer to use for you and the environment.
How to avoid liquids in golf grips?
To avoid liquids altogether, use compressed air to install your grips. Once the grip tape is applied to the shaft of the club, insert a special pressure tip, available at most golf supply companies, which attaches by a hose to an air pressure tank. The tip fits into the small hole in the butt of the golf grip.
What happens to golf clubs after water evaporates?
After the water evaporates, the clubs will bond to the tape, providing a secure grip for your clubs. The amount of time required for the clubs to be ready to use is generally longer than with solvent-based installations.
Can you use water deactivated grip tape in golf?
With increased interest in using more environmentally friendly equipment in golf, the use of water deactivated grip tape is on the rise. When replacing your grips, replace the tape as well with this newer, more ecologically sound grip tape. Deactivate the tape with water instead of a volatile and potentially harmful solvent.
Where is the tip on a golf grip?
The tip fits into the small hole in the butt of the golf grip. When you apply pressure, the grip expands slightly. This expansion allows you to push the grip onto the shaft and over the grip tape. Once the grip is in the proper position, release the pressure.
Can you use golf grip solvent on shaft?
The solvent temporarily deactivates the adhesion of the grip tape to give you time to install the grip onto the shaft. While special golf grip solvent is available, other materials can be used as well, some of which are safer to use for you and the environment.
What solvent to use to install golf grips?
Mineral Spirits. You can also use mineral spirits, found in any hardware store, to install your golf grips. This solvent is inexpensive, but if you use it indoors, you should be sure you have proper ventilation.
How to replace golf grips?
The process of replacing golf grips includes placing tape on the golf shaft, and then lubricating the tape with solvent in order to deactivate the tape's adhesive. The solvent mixes with the adhesive, creating a slippery surface that allows the grip to slide over the tape.
What type of grip tape is used in golf?
Water. In an effort to be more environmentally friendly, the golf industry has developed water-based solutions, which require the use of water-activated grip tape. Plain water and water-soap mixtures also activate this type of grip tape.
Can you use nail polish remover on golf grips?
Nail polish remover with acetone isn't the first thing you think of when installing golf grips, but it's ability to deactivate the adhesive on the tape makes it a good choice. While not quite as potent as commercial grip solution or even mineral spirits, nail polish remover has fewer fumes and doesn't require the same level of ventilation. It can be a more expensive option, but if you are replacing only one or two grips, this solvent will do the job.
What is the best alternative to store bought golf grip solvent?
Lighter Fluid. One alternative to store-bought golf grip solvent is lighter fluid, which happens to be very similar to what golf grip solvent actually is. Lighter fluid, however, is the most toxic and dangerous kind of golf grip solvent alternative you can choose. Even though it works well, you may be looking for another substitute ...
What is the best solvent for golf grips?
Mineral Spirits. Mineral spirits also work great as an alternative golf grip solvent. A mild form of petroleum distillate, mineral spirits are much less volatile and toxic than either lighter fluid or acetone.
What is mineral spirits?
Used to degrease and clean machine parts and remove the paint from paint brushes, mineral spirits are a healthier alternative to other solvents like turpentine. There is also an odorless form of mineral spirits that has had aromatic solvents removed.
When was re-grip golf club published?
Published: 28 July, 2010. Re-gripping your golf clubs can be a tedious task, but every now and then it is necessary. If you plan to re-grip your own golf clubs, the one thing you don't want to do is drive all the way to a golf pro shop just to buy some golf grip solvent that you can probably find in your garage somewhere.
Can you use nail polish remover on golf clubs?
Acetone is less toxic than most golf grip solvents and definitely less flammable, but the fumes can be just as dangerous, so be sure to re-grip your golf clubs in a well-ventilated area and avoid smoking cigarettes and any open flames.
Can you use water to remove golf grip tape?
This kind of grip tape is a little more expensive, but removes the need for any kind of solvent because the tape is water-activated. The steps for re-gripping are the same, except that you use plain water where you normally would use solvent. Nothing is less toxic than water, so this is a good substitute for using golf grip solvent.
How to apply grip tape solvent?
The best way to apply grip tape solvent is to add it to the inside of the grip first. Then, swish it around so it covers the inside completely (the guys in the videos I’ve linked to above both do this, so don’t miss it), then drizzle the solvent out of the grip over the grip tape. This both applies solvent to the grip and grip tape, and actually reduces the amount of solvent you use. And prevents the dreaded half-stick grip which almost always means you have to cut it off and start again with a new grip.
How much does it cost to regrip a golf club?
Some of the tools you'll need to regrip your clubs. Regripping your clubs can be expensive. Most clubfitters charge somewhere in the neighborhood of $2 to $3 to regrip each club, which is a pretty good payday for what takes probably 2-3 minutes per club to do.
What are Tour Velvet Plus 4 grips?
As you can see by the photo, I’m installing Golf Pride’s Tour Velvet Plus 4 grips onto my irons. These grips are called “Plus 4” because the lower hand region of the grip is built thicker to feel as though there are four wraps of tape underneath. Depending on what your preference is, you may want one or several layers of tape under your grips, either on the whole grip or the upper or lower areas. For me, even though I’m using midsized Tour Velvet Plus 4s, I still want two layers of tape under the whole grip.
Is grip tape toxic?
Just be sure to apply it the full length of your grip, and cover the butt end completely. Grip solvent is the right choice, and generally is non-toxic and works well enough. Ryan Noll.
What is the best way to regrip a golf club?
Grip solvents are essential to regripping your golf club; these chemicals remove excess residue left behind by your old grip and activate the new grip's adhesive. Sports equipment retailers and golf shops sell commercial grip solvents, which contain the hydrocarbon mixture petroleum naphtha, but you may be able to find an alternative around ...
What is the best grip solvent?
Mineral spirits, organic hydrocarbon solvents made from paraffin, are the most common grip solvent alternatives. Like commercial solvents, mineral spirits dissolve oil and grease, cutting through residue left behind by grip tape. Mineral spirits typically sell for slightly less than golf grip solvent. Home-improvement centers and art-supply stores often sell mineral spirits, which lend themselves to everything from waxing floors to cleaning paintbrushes. Although most mineral spirits emit a pungent odor, some retailers offer low-odor or even odorless varieties.
What is mineral spirits?
Home-improvement centers and art-supply stores often sell mineral spirits, which lend themselves to everything from waxing floors to cleaning paintbrushes.
Can you use paint thinner on golf grips?
Grip manufacturers warn against the use of common golf grip solvent removers such as paint thinner or commercial lubricants, as they evaporate too quickly and may leave greasy residues that prevent essential adhesion. Some manufacturers offer eco-friendly, nontoxic grip solvents that are nonflammable, non-ozone depleting and produce very little odor.
Can you use water activated grip tape on golf clubs?
By using a special type of grip tape, you can forgo solvents completely and rely on water. Water-activated grip tape, typically available from golf specialty retailers, comes in two-sided gripping strips with water-activated adhesive. To apply the tape, just mist the tape with water -- and sometimes a bit of dish soap, depending on the manufacturer of the tape -- to activate its built-in chemical adhesive. To remove it, cut off tape with scissors. It will leave no residue.
Nessism
That's what I use. Get the odorless type for less stink. Works great. BTW, mineral spirits = paint thinner
QuickFeet
Mineral Spirits, Varsol, Naptha, charcoal lighter fluid, lighter fluid, Odorless Mineral Spirits; all in the same family of light distillate.
ladahl
I use Naptha... Not sure why, maybe because it has a quicker dry time??
Nessism
MSDS for both Kleen-Strip "Paint Thinner" and "Odorless Mineral Spirits" states between 95-100% "Stoddard solvent {Mineral spirits; Aliphatic Petroleum Distillates; White spirits}". The "Paint Thinner" product states 1-2% "1,2,4-Trimethylbenzene". Is that the stinky stuff? At any rate, paint thinner is fine to use as a grip solvent.
radiman
I just picked up a gallon of mineral spirits at Walmart for $10. I probably could have found it for less. But, this should last me forever. Way cheaper than buying "grip solvent" from a golf shop.
dlygrisse
Mineral spirits, paint thinner, lighter fluid all work great.
treadwej
Mineral Spirits, Varsol, Naptha, charcoal lighter fluid, lighter fluid, Odorless Mineral Spirits; all in the same family of light distillate. Probably a few degrees difference between them on their flash point and distillation range.