what to use other than minerial sperits change golf grips

Mineral spirits, denatured alcohol, acetone, nail polish remover or charcoal lighter fluid, all provide adequate deactivation of grip tape to install new grips. They also evaporate relatively quickly to allow the grip tape to bond to the grip in a relatively short amount of time, often less than an hour.

Full Answer

What can I use instead of Golf Grips?

1 Overview. Replacing your own golf grips is easy, rewarding and can save you a lot of money. ... 2 Paint Thinner / Mineral Spirits. Paint thinner or Mineral Spirits are cheap alternatives to grip solvent and also dry quickly. ... 3 Rubber Cement. Another affordable substitute is rubber cement. ... 4 Water. ... 5 Air Compressor. ... 6 WD-40. ...

Should I use paint thinner or mineral spirits for grips?

If you have other uses for paint thinner or mineral spirits then the regular stinky stuff (some are not as stinky as others) should work fine on grips. I really don't do enough grips to use other than the supply of grip solvent already on hand. (maybe 10 grips per year) But from now on it will be mineral spirits when a re-supply is needed.

How are golf club grips replaced?

The traditional method of replacing golf club grips requires the use of a volatile solvent. This liquid is applied to the inside of the golf grip and over the grip tape, which bonds the grip to the club shaft.

What solvents are used to regripping a golf club?

Rubber Vs. Iron Dumbbells Grip solvents are essential to regripping your golf club; these chemicals remove excess residue left behind by your old grip and activate the new grip's adhesive.

What liquid do you use to put golf grips on?

Almost every household has a can of WD-40 lying around. This all-purpose lubricant works with double-sided tape or standard grip tape. Make sure to spray the tape and push the grip onto the shaft and adjust as needed. Similarly to paint thinner, this takes a few hours to dry and is very flammable.

Can you use rubbing alcohol for golf grips?

Step 2: Get rid of old grip tape It's sometimes the most tedious and least fun part of the re-gripping process, but Goo-Gone, Goof-Off, rubbing alcohol, etc., all work to help speed up the process.

How do you make homemade grip solvent?

Water and Soap The cheapest and most convenient homemade solvent is water. Water-based grip tape has a glue-like substance that is activated by water. Before you spray the tape, add a small amount of detergent, which provides lubrication. Water offers many advantages -- nonflammable, odorless and safe for your skin.

What removes golf grip tape residue?

On a graphite shaft, after warming the tape, it is recommended to peel the tape off by hand. Tape strippers can damage graphite. After stripping and peeling most of the tape, the remaining residue can be easily removed with a towel dampened with grip solvent.

What can I use instead of grip solvent?

Paint Thinner / Mineral Spirits Paint thinner or Mineral Spirits are cheap alternatives to grip solvent and also dry quickly. Like grip solvent, the mineral spirits will lubricate double-sided tape allowing you to work the grip over the shaft so that it adheres.

What else can be used as grip solvent?

Mineral spirits, denatured alcohol, acetone, nail polish remover or charcoal lighter fluid, all provide adequate deactivation of grip tape to install new grips. They also evaporate relatively quickly to allow the grip tape to bond to the grip in a relatively short amount of time, often less than an hour.

How do you clean golf grips?

What do you need: Mild dish soap and water, soft scrub brush and a towel. Mix the soap in a bowl of warm water. Dip the scrub brush in the soapy water and scrub the grip on all sides. Rinse soap off grip and pat dry with towel and let grips dry before use.

Can you use white spirit to Regrip golf clubs?

Place the club in the vice with the head pointing up, taking care to use a shaft protector (or similar) to avoid damage as you tighten. Now take one of the new grips, cover the little hole at the end, and pour in a little White Spirit.

How can I improve my golf club grips?

2:328:33HOW TO GRIP THE GOLF CLUB - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd have our hand rotated very much around to the left or very much round to the right or somewhereMoreAnd have our hand rotated very much around to the left or very much round to the right or somewhere in between.

Can you leave the old tape on when regripping golf clubs?

Make a Tape Decision One option is to leave the existing tape on your clubs and reuse it. This is possible, but it's probably the least desirable of the three options. After all, it's likely the tape won't form as strong a bond with the grip as it did the first time around.

How do you remove old griptape?

1:432:52How to Remove Skateboard Grip Tape | Tactics - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse your knife or razor blade to scrape off any residual. Adhesive. You can also use a little bit ofMoreUse your knife or razor blade to scrape off any residual. Adhesive. You can also use a little bit of goo gun or light sandpaper. If you want to get it all.

Can you put new grip tape over old grip tape?

New griptape can often work wonders. Worn out griptape is best removed by using a hair dryer. The hot air liquefies the adhesive, allowing the griptape to easily peel off. Then you can simply apply a new layer of grip tape.

How to replace golf club grips?

The traditional method of replacing golf club grips requires the use of a volatile solvent. This liquid is applied to the inside of the golf grip and over the grip tape, which bonds the grip to the club shaft. The solvent temporarily deactivates the adhesion of the grip tape to give you time to install the grip onto the shaft. While special golf grip solvent is available, other materials can be used as well, some of which are safer to use for you and the environment.

How to avoid liquids in golf grips?

To avoid liquids altogether, use compressed air to install your grips. Once the grip tape is applied to the shaft of the club, insert a special pressure tip, available at most golf supply companies, which attaches by a hose to an air pressure tank. The tip fits into the small hole in the butt of the golf grip.

What happens to golf clubs after water evaporates?

After the water evaporates, the clubs will bond to the tape, providing a secure grip for your clubs. The amount of time required for the clubs to be ready to use is generally longer than with solvent-based installations.

How to avoid inhalation injuries?

When using volatile and flammable solvents, work in a well-ventilated area, away from open flames. This helps to avoid inhalation injuries and the threat of a fire. Wear solvent-proof rubber gloves to reduce the risk of touching volatile solvents.

Can you use golf grip solvent on shaft?

The solvent temporarily deactivates the adhesion of the grip tape to give you time to install the grip onto the shaft. While special golf grip solvent is available, other materials can be used as well, some of which are safer to use for you and the environment.

Can you use water deactivated grip tape in golf?

With increased interest in using more environmentally friendly equipment in golf, the use of water deactivated grip tape is on the rise. When replacing your grips, replace the tape as well with this newer, more ecologically sound grip tape. Deactivate the tape with water instead of a volatile and potentially harmful solvent.

Where is the tip on a golf grip?

The tip fits into the small hole in the butt of the golf grip. When you apply pressure, the grip expands slightly. This expansion allows you to push the grip onto the shaft and over the grip tape. Once the grip is in the proper position, release the pressure.

What is the best grip solvent?

Mineral spirits, organic hydrocarbon solvents made from paraffin, are the most common grip solvent alternatives. Like commercial solvents, mineral spirits dissolve oil and grease, cutting through residue left behind by grip tape. Mineral spirits typically sell for slightly less than golf grip solvent. Home-improvement centers and art-supply stores often sell mineral spirits, which lend themselves to everything from waxing floors to cleaning paintbrushes. Although most mineral spirits emit a pungent odor, some retailers offer low-odor or even odorless varieties.

What is the best way to regrip a golf club?

Grip solvents are essential to regripping your golf club; these chemicals remove excess residue left behind by your old grip and activate the new grip's adhesive. Sports equipment retailers and golf shops sell commercial grip solvents, which contain the hydrocarbon mixture petroleum naphtha, but you may be able to find an alternative around ...

What is compressed air?

Compressed Air. An air compressor allows you to forgo messy solvents. By inserting the nozzle of a compressor into a hole in the club's grip cap, you can blow the grip from the tape with a burst of air. Unlike some other alternatives, compressed air is nontoxic and emits no fumes.

What is mineral spirits?

Home-improvement centers and art-supply stores often sell mineral spirits, which lend themselves to everything from waxing floors to cleaning paintbrushes.

Can you use water activated grip tape on golf clubs?

By using a special type of grip tape, you can forgo solvents completely and rely on water. Water-activated grip tape, typically available from golf specialty retailers, comes in two-sided gripping strips with water-activated adhesive. To apply the tape, just mist the tape with water -- and sometimes a bit of dish soap, depending on the manufacturer of the tape -- to activate its built-in chemical adhesive. To remove it, cut off tape with scissors. It will leave no residue.

Can you use paint thinner on golf grips?

Grip manufacturers warn against the use of common golf grip solvent removers such as paint thinner or commercial lubricants, as they evaporate too quickly and may leave greasy residues that prevent essential adhesion. Some manufacturers offer eco-friendly, nontoxic grip solvents that are nonflammable, non-ozone depleting and produce very little odor.

Who is Dan Ketchum?

Dan Ketchum has been a professional writer since 2003, with work appearing online and offline in Word Riot, Bazooka Magazine, Anemone Sidecar, Trails and more. Dan's diverse professional background spans from costume design and screenwriting to mixology, manual labor and video game industry publicity. Image Credit.

How to replace golf grips?

The process of replacing golf grips includes placing tape on the golf shaft, and then lubricating the tape with solvent in order to deactivate the tape's adhesive. The solvent mixes with the adhesive, creating a slippery surface that allows the grip to slide over the tape.

What solvent to use to install golf grips?

Mineral Spirits. You can also use mineral spirits, found in any hardware store, to install your golf grips. This solvent is inexpensive, but if you use it indoors, you should be sure you have proper ventilation.

What type of grip tape is used in golf?

Water. In an effort to be more environmentally friendly, the golf industry has developed water-based solutions, which require the use of water-activated grip tape. Plain water and water-soap mixtures also activate this type of grip tape.

Can you use nail polish remover on golf grips?

Nail polish remover with acetone isn't the first thing you think of when installing golf grips, but it's ability to deactivate the adhesive on the tape makes it a good choice. While not quite as potent as commercial grip solution or even mineral spirits, nail polish remover has fewer fumes and doesn't require the same level of ventilation. It can be a more expensive option, but if you are replacing only one or two grips, this solvent will do the job.

How to apply grip tape solvent?

The best way to apply grip tape solvent is to add it to the inside of the grip first. Then, swish it around so it covers the inside completely (the guys in the videos I’ve linked to above both do this, so don’t miss it), then drizzle the solvent out of the grip over the grip tape. This both applies solvent to the grip and grip tape, and actually reduces the amount of solvent you use. And prevents the dreaded half-stick grip which almost always means you have to cut it off and start again with a new grip.

How much does it cost to regrip a golf club?

Some of the tools you'll need to regrip your clubs. Regripping your clubs can be expensive. Most clubfitters charge somewhere in the neighborhood of $2 to $3 to regrip each club, which is a pretty good payday for what takes probably 2-3 minutes per club to do.

What are Tour Velvet Plus 4 grips?

As you can see by the photo, I’m installing Golf Pride’s Tour Velvet Plus 4 grips onto my irons. These grips are called “Plus 4” because the lower hand region of the grip is built thicker to feel as though there are four wraps of tape underneath. Depending on what your preference is, you may want one or several layers of tape under your grips, either on the whole grip or the upper or lower areas. For me, even though I’m using midsized Tour Velvet Plus 4s, I still want two layers of tape under the whole grip.

Is grip tape toxic?

Just be sure to apply it the full length of your grip, and cover the butt end completely. Grip solvent is the right choice, and generally is non-toxic and works well enough. Ryan Noll.

Nessism

That's what I use. Get the odorless type for less stink. Works great. BTW, mineral spirits = paint thinner

QuickFeet

Mineral Spirits, Varsol, Naptha, charcoal lighter fluid, lighter fluid, Odorless Mineral Spirits; all in the same family of light distillate.

ladahl

I use Naptha... Not sure why, maybe because it has a quicker dry time??

Nessism

MSDS for both Kleen-Strip "Paint Thinner" and "Odorless Mineral Spirits" states between 95-100% "Stoddard solvent {Mineral spirits; Aliphatic Petroleum Distillates; White spirits}". The "Paint Thinner" product states 1-2% "1,2,4-Trimethylbenzene". Is that the stinky stuff? At any rate, paint thinner is fine to use as a grip solvent.

radiman

I just picked up a gallon of mineral spirits at Walmart for $10. I probably could have found it for less. But, this should last me forever. Way cheaper than buying "grip solvent" from a golf shop.

dlygrisse

Mineral spirits, paint thinner, lighter fluid all work great.

treadwej

Mineral Spirits, Varsol, Naptha, charcoal lighter fluid, lighter fluid, Odorless Mineral Spirits; all in the same family of light distillate. Probably a few degrees difference between them on their flash point and distillation range.