Regular two-part epoxy found in hardware stores can be used to re-shaft a golf club, but it is better to use epoxy designed specifically for golf clubs. Epoxy not formulated for the shear strength required to hold up to high impact will likely break loose.
- J-B Weld 8281 Professional-Size Steel Reinforced Epoxy Twin Pack – 10 oz. View on Amazon. ...
- Brampton Epoxy Pro-Fix 20/20 Long Cure Golf Club Repair. View on Amazon. ...
- GolfWorks High Strength Epoxy Golf Club Head Shaft Adhesive 50 ml. View on Amazon. ...
- Permabond Epoxy For Golf Clubs.
How to install a golf shaft with epoxy?
- Make sure you purchase the correct size! Click here for a shaft size guide
- Driver/wood ferrules are shorter than iron ferrules
- Putters do not need ferrules
What are the best golf shafts?
best golf shafts for irons
- UST Recoil ZT9 Iron Shaft Set. UST Mamiya Recoil ZT9 Iron Shafts are known for the best and unparalleled stability in the industry.
- Aerotech Steel Fiber FC 90. The new SteelFiber FC shafts are designed with a progressive tip that gives higher ball flight in the mid- and long irons also classic ...
- Mitsubishi-Rayon Kuro Kage Black 70 Iron R Shaft. ...
What type of golf shafts are right for You?
- Steel shafts are less expensive than their counterparts’ graphite and multi-material shafts.
- As these shafts are made with heavy steel, you will get great control over the golf club you are using.
- Though these shafts will ensure control, you may suffer when it is about taking the ball some extra yardages. ...
Should golf beginners play with a stiff shaft?
Stiffness or Flex
- Swing Speed. The stiffness or flex of the shaft is a much-neglected aspect of your golfing equipment as most golfers are more interested in the brand, or technical features, or ...
- Indications. ...
- Over Correcting. ...
- Classification. ...
- Beware, Don’t Over-Compensate. ...
Can JB Weld epoxy be used for golf clubs?
Yes, you can use Jb Weld on golf clubs. This adhesive is strong and will hold the club together if it's broken.
What glue is used for golf shafts?
Golf club heads are attached to the golf shaft with epoxy glue. Epoxy is a thermosetting polymer that is a high strength adhesive. Two parts, the resin and the hardener, are mixed together to create a chemical reaction that cures the epoxy to hardness.
How do you apply epoxy to golf shafts?
3:494:48Hireko Golf Videoblog "Tips on Epoxying a Golf Club" by ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're in the head I just simply use the shaft. And just roll the shaft tip in and then mix it andMoreWe're in the head I just simply use the shaft. And just roll the shaft tip in and then mix it and just put it in in the head.
Can you use Loctite on golf clubs?
1:302:53LOCTITE Success Story: PING Golf - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo they have a steel color with a lock type product that we use in our irons. It actually has a greyMoreSo they have a steel color with a lock type product that we use in our irons. It actually has a grey color to it. So they're using that grey Loctite adhesive.
Do you need special epoxy for golf clubs?
Unless you have to, do not use non-golf specific epoxies. Use epoxy designed for golf as they usually have higher peel sheer strengths and elastic properties that hold well during impacts specific to a golf club hitting a golf ball.
How long does it take for epoxy to dry on a golf club?
On average, the curing of golf epoxy may take about 12 to 18 hours to get dry on a warm day.
What is the strongest golf club epoxy?
The Best Epoxy For Golf ClubsOur Top Pick: J-B Weld 8281.Brampton Epoxy Pro-Fix 20/20.GolfWorks High Strength Epoxy.Permabond Epoxy For Golf Clubs.
What is Loctite epoxy?
Product Overview. Loctite General Purpose Epoxy is a resilient, permanent two-part adhesive consisting of an epoxy resin and a hardener for large or multi-piece projects that require the highest bonding strength.
How do you epoxy iron head shafts?
0:158:05How to Glue a Club Head to a Shaft | DIY Project - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn okay so i'm gonna open this up you gotta just turn it. And remove it. And i'm just gonna use justMoreIn okay so i'm gonna open this up you gotta just turn it. And remove it. And i'm just gonna use just one line that's what uh. You're supposed to do. So. And a line like that. And that's all you need.
How do you glue a driver shaft?
0:236:41HOW to FIX your GOLF CLUB if the HEAD comes off | Easy TutorialYouTubeStart of suggested clipEnd of suggested clipIf you want to just make sure you're getting the right thing basically just one side hardener. AndMoreIf you want to just make sure you're getting the right thing basically just one side hardener. And one side resin. And they mix together to form a really strong bond.
Can I use araldite on golf clubs?
I use araldite for shafts. Works well or you can buy shaft epoxy from gamola etc.
How do you fix a golf club head?
2:0514:23LOOSE GOLF CLUB HEAD / How To Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipAhead put a little bit of epoxy. In that space between the ferrule. And the hosel squeeze them backMoreAhead put a little bit of epoxy. In that space between the ferrule. And the hosel squeeze them back together wipe it clean let it dry.
How long to mix epoxies for golf drivers?
These epoxies are great for when you are building multiple golf drivers in one sitting. Likewise, the 5 minute, 10 minute and other quick cure epoxies tend to have lower overall sheer strength and mixing times. These quick epoxies have very short mix times and are not recommend when building more than 1 or 2 golf clubs or golf drivers at one time.
Can you use glass beads on epoxy?
Yes... the secret to making any epoxy stronger and increase the strength and adhesion is to add glass shafting beads. A small pinch of these beads will help increase not only strength but will help center your golf shaft in the hosel. It is recommended to use the shafting beads in all golf driver or golf club builds!
Can you mix more than one golf club at a time?
These quick epoxies have very short mix times and are not recommend when building more than 1 or 2 golf clubs or golf drivers at one time. The shorter dry time epoxies are appealing to golfers that want to build and hit their new clubs the same day, but I always recommend the longer cure epoxy for longevity of the club.
Can you use non-golf specific epoxies on golf clubs?
Unless you have to, do not use non-golf specific epoxies. Use epoxy designed for golf as they usually have higher peel sheer strengths and elastic properties that hold well during impacts specific to a golf club hitting a golf ball.
Can you use non-golf epoxies on a golf swing?
Although these will most likely hold for most applications, they are not recommended and engineered specific to unique forces that a golf swing cause. Unless you have to, do not use non-golf specific epoxies.
Do epoxies hold longer?
First, let me say that the majority of epoxies will do the intended job well. But with this said, there is varying levels of quality, sheer strength and cure times. As a basic rule of thumb, the longer the dry or cure the time the higher the strength or hold. The longer dry time epoxies, also known as 24 hour epoxies typically offer longer times ...
What is the strength of epoxies for golf clubs?
Golf club specific epoxies are designed to have what's called a "lap shear" strength of around 2500, which is a measure of how well a very , very thin layer ...
How long does it take Royal Onyx epoxy to cure?
I switched to GW tour set epoxy and it works great. Depending on the gap, it sets in as little as 45 minutes, and full cure in 24 hours.
Can you use epoxy to break down graphite?
I do not use it for graphite shafts though because it doesn't break down without alot of heat and it is pretty tough to save a graphite shaft when pulling it. For graphite, always use an epoxy that breaks down at 250 degrees or less.
Is epoxy for shafts stronger than quick setting?
Epoxy manufacturer want to have more money with same product after changing label like "This epoxy is prepared for golf clubmaking". In general, long setting time epoxy is stronger than quick setting epoxy, even though they have same curing time.
Does Golfsmith sell shafting epoxy?
Golfsmith probably sells 1/100th the volume of shafting epoxy versus what Loctite sells at WalMart and Lowes and all the other retail outlets. It wouldn't make much sense to me that Loctite or DuPont could make a lot of extra money by selling the same epoxy at a higher price to be sold as "golf shaft epoxy".
Series Navigation
Using epoxy to install a shaft is not a difficult task, but I think some people get a bit confused when dealing with different types of golf clubs. Putters are fairly easy to do, but when re-shafting irons and woods, we have to install the ferrule as well, which is a bit confusing to the novice.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
Does epoxy work on composite shafts?
In addition you will ensure that excess epoxy does not work its way up inside the shaft tip (especially on composite shafts) and prevent potential breakage. Shop Golf Shafting Epoxy.
Can you use too much epoxy on a golf club?
Getting “just the right amount” of golf club epoxy on the shaft tip and coating the inside of the hosel is a delicate – and critical – part of golf club assembly. Beginning clubmakers generally tend to use too much epoxy to start, but learn to cut back after a few messy clean-up jobs. It is important to understand that using too much epoxy can do ...
What is golf epoxy?
What is a Golf Club Epoxy? Golf epoxy is an organic compound that is used to repair and glue together broken parts of golf clubs. Epoxy is formed by a covalent bond between carbon and other elements like nitrogen, oxygen, or hydrogen. This is subject to curing in the presence of a catalyst to form an epoxy resin.
How much epoxy do you need for a golf club?
This will usually be less than 0.5g. A drop is more than enough for the shaft tip.
How to apply epoxy to a graphite shaft?
The steps to apply epoxy are the same irrespective of whether you’re going to fix a steel shaft or a graphite shaft. Measure the tip of your old shaft. Trim the tip end of the new shaft following the trimming instructions so that it is the exact size of the old shaft. Roughen or abrade the shaft tip.
How to fix a broken golf club?
First remove the old epoxy from the hosel of the broken club. Use sandpaper and abrade the shaft tip that has to go into the club. Clean both the sealing surfaces using a solvent to remove any debris that may cause interference with the epoxy bond. Mix the epoxy components in a disposable container.
How much PSI should I use for golf shafting?
Ideally, your golf epoxy should have a PSI number of over 2500 PSI. The GolfWorks shafting epoxy is a great option because of its high torque resistance and shear strength. The epoxy renders 90% curing to 2765 PSI in a day and 100% curing to 3280 PSI in a week.
How to keep a shaft from getting burnt?
Keep the shaft in a super lock tight shaft holder and tighten it in a vise. If your shaft has a plastic ferrule, cover the ferrule with a wet paper towel so that it does not get burnt.
What is epoxie used for?
Golf club epoxies have excellent adhesion properties and are helpful in the coating, sealing, and bonding golf clubs. They offer excellent adhesion to multiple materials like wood, carbon, steel, graphite, titanium, composite, and more.
Club Building 101: Understanding epoxy
There are three main components to a golf club: head, shaft, grip–but what keeps the head from flying off while traveling over 100 mph? One of the most under appreciated pieces of every club, epoxy!
The Wedge Guy: The secret angle of golf success
From observation of thousands of recreational golfers, I believe one of the most misunderstood intricacies of the golf swing is how the golf club “releases” through impact. Almost universally, golfers seem to think that the club releases through impact by or with an unhinging of the wrists, so that the left arm and shaft form a straight line.
Club Junkie: Reviewing the new Mizuno Pro irons, Mizuno ST-X hybrid, and Cobra LTDx hybrid
The Mizuno Pro iron lineup offers something for everyone. The 221 is a great looking and feeling blad, the 223 is an easy to hit players cavity, and the 225 is a tech packed iron with distance and forgiveness. The Mizuno ST-X 220 hybrid is a forgiving and easy to launch long iron replacement.
How to use expoxy on golf grip?
Before you use the expoxy, use a drill to break the grip tape at the butt end of the golf grip. Go thru the drill hole at the back of the grip. When you try to attach the head, you'll create a vacuum in the shaft and the head won't attach correctly.
How long does it take for epoxy to cure?
You don't have to use golf club epoxy but you are best advised to look for one that a) cures in 18 hours or longer (short setting epoxys generally don't acquire the same strength as slower ones) and b) has a high lap shear strength (> ~2500 p.s.i., 3000+ if you can find it). Make sure you set it in temperatures > ~16°C.
