Full Answer
Does lengthening a golf club change the lie angle?
Any changes in the golf club will also alter its performance. It should always fit the user every time, and measurement should be accurate for the player to have a perfect play. This is the same with lengthening a golf club cause it will also alter the lie angle. Every half-inch length change alters the lie by a degree.
What is an upright lie angle in golf clubs?
An upright lie angle is when the toe of the club is up off the ground. Though it depends more on the golfer’s individual swing, their overall height plays a role. As a general rule of thumb, taller golfers usually need a tad bit more of an upright lie in their irons.
Does lie angle matter in golf?
In a word, yes. Lie angle matters because it impacts the direction that the clubface is pointing at the moment of impact. If your lie angles are way off, it’s going to be hard to hit the ball accurately. And, if you do manage to hit the ball accurately, you’ll need to make some adjustments or compensations to make it happen.
Do longer shafts increase distance on golf clubs?
However, some clubs benefit more than others. Installing longer shafts in wedges and short irons will almost always result in more distance, as most players have little trouble swinging the shorter clubs.
Does increasing shaft length change lie angle?
Increasing the length also changes shaft flex. For every 1" added, the shaft becomes one flex softer; likewise, a shorter shaft plays stiffer. Shaft length also affects lie angle.
How does iron length affect lie?
0:1312:35Hit Your Irons STRAIGHTER & LONGER // Lie Angle & LengthYouTubeStart of suggested clipEnd of suggested clipOf moving lie angle. Not only do these sort of adjustments come with directional differences we'reMoreOf moving lie angle. Not only do these sort of adjustments come with directional differences we're looking at the flatter we make this iron the heavier the swing weight gets right.
What happens when you lengthen a golf club?
What Happens When Golf Clubs Are Too Long? For most golfers, having clubs that are too long will result in the most inconsistent shots. Clubs that are too long will make you stand too upright, which can cause both heel and toe shots as well as a tendency to pull the ball.
Are longer clubs more upright?
Longer clubs are flatter, shorter clubs are more upright. Every set of irons will have a standard lie angle for each iron in the set. For example, the Mizuno MX-200 6-iron has a standard lie angle of 61 degrees, the 5-iron is 60.5, and the 4-iron is 60.
Does upright lie promote a draw?
The upright lie also promotes a left tilting spin axis, which leads to what's generally described as draw spin. An upright lie angle basically gives you a head start, but depending on the severity of the slice conditions the golfer generates, it certainly won't guarantee a draw.
Does 1 degree lie angle make difference?
Yes it will make a difference, I play 2 degree upright and +1/2. If your hitting the ball left all the while (I am guessing your right handed) won't be to do with having the lye angle to flat.
How long should I extend my golf clubs?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
When should I lengthen my golf clubs?
If you are taller than about 6'0”, you will likely need clubs that are a bit longer than normal. The standard golf clubs that come from the manufacturer are typically built to help golfers who are around 5'7” to 6'0”. If you are 6'4”, you can almost guarantee that you will need longer golf clubs.
Do pro golfers use longer shafts?
Pagel explained that the model local rule, MLR G-10, not only wouldn't affect recreational golfers, as it applies to only the game's highest levels, but it would have minimal impact on the pros; Pagel cited data that determined that just 3% of professional golfers use or have used driver shafts longer than 46 inches ( ...
Does 2 degrees upright make a difference?
What Does 2 Degrees Upright Mean On A Golf Club? If a club is 2 degrees upright that can mean a couple of different things depending on the context. Most likely, it means that a club is 2 degrees more upright than the standard lie angle for that brand and model.
How do you tell if you lie angle is correct?
After you make impact the line will appear on the face. If it's pointing towards the toe, then your club is too upright. If it's pointing towards the heel, then it's too flat. If the line is perpendicular to the grooves on the face, then your lie angle is correct.
Should all my clubs have the same lie angle?
Your clubs, which include your driver through your wedges (and your putter for that matter), do not all have the same lie angles. If they did, you'd have to have all your clubs the exact same length. But since they aren't, the lie angle on each club is different from one another.
How does length affect lie?
The lie angle will automatically change if clubs are lengthened. Only slightly but it will change. There is no such thing as standard lie as all the manufacturers generally are different. The lie angle that is correct for you can only be tested dynamically - i.e. via a pro or fitter on a lie board hitting golf balls.
What does shortening a club do to lie angle?
If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter. You may need to have the lie angles readjusted after shortening them.
Do shorter golfers need flatter clubs?
Generally, shorter golfers will need a flatter lie angle, whereas taller players will need a more upright lie angle. If you hit a lot of shots toward the toe of your club and your ball tends to fade to the right, you probably have a lie angle that is too flat for you.
Does lie angle matter on irons?
To briefly summarize, the lie angle of your irons is extremely important because it will greatly affect the initial direction of your shots. Not all irons are created equal, and most players are using irons that likely do not have the right specifications for their swing.
What happens if the lie angle of your golf clubs is ill-suited to you?
When the lie angle of your clubs is wrong for your swing or body type, you can put a great swing on the ball and still have problems with accuracy. Poorly fitting lie angles create pushes and pulls and other mishits.
What is the lie angle of a golf club?
The "lie angle" of any golf club is the angle formed between the center of the shaft and the sole, or ground line, of the club when the club is soled in its proper ...
What does it mean when your divots are deeper on the toe side than the heel side?
If your divots are deeper on the toe side than the heel side (toe down, heel up at impact) or deeper on the heel side than the toe side (toe up, heel down at impact), that's a sign your lie angles might be too flat or too upright.
What is the lie angle on a 9 iron?
Upright lie angle: A lie angle that is higher than the standard lie angle (a 66-degree lie angle on a 9-iron is more upright than the standard 9-iron lie angle of around 64 degrees). You might hear a golfer (or clubfitter) saying things such as, "You need flatter lie angles on your irons," or "I had my irons bent 1-degree upright.".
Why is a proper lie angle important?
Proper Lie Angle Is More Important in Irons Than in Woods. Don't misunderstand: Lie angle is an important factor in all golf clubs, even the putter. But having improperly fit lie angles causes more problems in irons than in the woods.
What is lie angle?
Lie angle is a factor that affects the accuracy of golf shots. Golfers who use clubs whose lie angles don't fit their body types and/or golf swings are costing themselves strokes. Matching the lie angle of clubs to the specific golfer is one of the goals of a clubfitting session.
What does it mean when your toe is up at impact?
A toe-up position at impact indicates that your lie angle might be too upright; a toe-down position (meaning the club's heel is higher than the toe) at impact indicates that your lie angle might be too flat.
TheMagicStinger
So typically I should play 1* upright. However, I have come to realize that I would like slightly longer irons.
Pepperturbo
I don't know a canned answer for that lie angle. It probably depends on where you grip the club. It's easy to buy lie angle tape and test. I suggest you contact the OEM to check whether or not the OEM lengthened the irons and adjusted lie angles accordingly.
TheMagicStinger
Thanks. I'll do the tape. I feel like I'm compensating for it being wrong and it's pretty annoying.
TheMagicStinger
Being 6'4" I feel like I'm reaching. The smart play here is probably to extend then figure out how to bend them?
drvrwdge
I kind of 2nd what everyone has already said. Most OEMs will adjust for length in head weight if ordered longer than standard. Mizuno uses lighter weight heads and Ping will use a lighter weight insert in the port. This will give you stock SW at the added length.
Nessism
Extending the shafts will make the "effective lie angle" more upright. If you have a tendency to hook the ball this won't help that situation.
Popular Now
Now in early 2022, do you think Ping G410 LST is still the best driver?
What is Golf Club Lie Angle?
You have heard over and over again how important it is to have your clubs fitted to your swing. But you are probably thinking “How much difference can it really make?”. The answer could be a significant amount depending on how far out of line your clubs are with your swing.
What is the lie angle of a golf club?
The lie angle is the angle between the sole of the club and shaft. If the toe is down at impact, the lie angle would be considered flat. A toe up condition would be considered upright. An ideal lie angle would have the sole of the club parallel with the ground at impact. Now that we understand what the lie angle is, ...
What to do if you don't have time to perfect your golf swing?
However, if you don’t have the time to perfect your golf swing. You might try adjusting your lie angle to help cover your swing faults.
How far off the pin should you hit the golf ball?
When you consider that you almost never execute a perfect swing, 1 degree off could easily cause you to be in the bunker instead of on the green. If you hit the ball 10 feet left of the pin, your lie angle would cause you to be an extra 6.5 feet left. There are many bunkers that are less then 16.5 feet from the pin.
What is the lie angle of a soft forged golf club?
Keep in mind that every manufacturer has their own standard lie angle. The standard lie angle between manufacturers could be up to 2.5 degrees different.
How to fix a golf swing flaw?
As discussed earlier, the best solution to a swing flaw is to fix your swing through lessons and repetition. However, many people just want to go enjoy a round of golf every now and then without a lot of practice. If this is you, you may want to adjust your clubs to help cover up a swing flaw. While not ideal, it could help you enjoy the game more.
How far would a shot pulled 10 feet left end up?
With a lie angle 1 degree flatter than it should be, a shot pulled 10 feet left would end up 3.5 feet from the hole for a tap in. When you take this into consideration, it really depends on your swing faults as to how much an incorrect lie angle would help or hurt.
What is the lie angle of a golf club?
The lie angle of a golf club is the angle that is formed between the club shaft and the ground when the club is soled properly at address.
Which golf clubs have flatter lie angles?
Long clubs have flatter lie angles than shorter clubs, so the angle formed with a driver is going to be lower than with a pitching wedge, for instance.
Why does lie angle matter?
Lie angle matters because it impacts the direction that the clubface is pointing at the moment of impact. If your lie angles are way off, it’s going to be hard to hit the ball accurately. And, if you do manage to hit the ball accurately, you’ll need to make some adjustments or compensations to make it happen.
What is the best angle for a pitching wedge?
Why is Lie Angle Actually Important? 1 A common lie angle for a pitching wedge is 64*. If that happens to be a good fit for your game and your swing, you’ll be in good shape. However, for many players, that is going to be either too upright or too flat. 2 It that’s too upright for you, the toe of the club is going to be up in the air at impact, while the heel digs into the turf. This is a problem because the clubface will be effectively shut at impact, and the ball will likely go left. Even if you make a good swing, the result may not be what you want because of the lie angle. 3 On the other hand, if that 64* angle is too flat, the heel will be off the ground at impact and the toe will dig in. This is going to typically lead to misses to the right of the target.
What to do if your divots aren't nice and square?
If your divots aren’t nice and square in the back, there is a good chance you need a lie angle adjustment.
What happens if your 64 angle is too flat?
On the other hand, if that 64* angle is too flat, the heel will be off the ground at impact and the toe will dig in. This is going to typically lead to misses to the right of the target.
Can you change the angle of your irons?
If it turns out that your lie angles need to be changed, it may be possible to have your current irons bent into the right position. That doesn’t work with drivers, but many of the modern drivers on the market today can be adjusted by changing the position of the shaft in the hosel.
What happens if you have a wrong lie angle on your golf clubs?
If you have the wrong lie angle on your golf clubs, you will struggle with making solid, consistent contact. In fact, an improper lie angle can force you into making negative compensations in your swing to make solid contact. This will eventually turn into bad habits.
What lie angle should my clubs be?
That question depends on many factors and is impossible to answer without seeing your swing and what clubs you are currently using. Though you can learn a great deal by using the impact board and the marker trick, it is best to seek out a professional club fitter so that you can enjoy the best possible results on the course. If you are in the market for a new set of golf clubs, the fitting is thrown in for free as long as you commit to buying.
Why is it so important to have clubs with the right lie angle?
However, if your equipment is always working against you, you will constantly be fighting your golf swing on the course. This is no fun and leads to lots of frustration during your rounds.
How do you measure the lie angle of a golf club?
The old-school way of measuring lie angle uses a couple of commonly used golf tools: an impact board and some tape. Tape up the sole of your golf club and hit a few shots off the impact board. By looking at both the tape and the impact board, you can tell what general type of lie angle you need.
What happens if the ink is angled toward the heel of the clubface?
If the ink is angled toward the toe of your clubface, the club you are using has too much of an upright lie angle. Conversely, if the ink points toward the heel of the clubface, the lie angle is too flat for your swing.
What is the second most common lie angle?
This lie angle is the second most common type because lots of amateur golfers struggle with an over-the-top swing plane and the upright lie angle helps keep the ball from heading too far to the right each time. Be careful with going with too much of an upright lie, though, as this could lead to those dreaded sharp duck hooks into the water that we all hate.
What is an upright lie angle?
An upright lie angle is when the toe of the club is up off the ground. Though it depends more on the golfer’s individual swing, their overall height plays a role. As a general rule of thumb, taller golfers usually need a tad bit more of an upright lie in their irons.
How does lengthening a shaft affect swing?
Timing and Feel. In many ways, the biggest effect of lengthening a club shaft is how it affects your ability to swing the club. The combined changes in length and swing weight make the club feel different. In turn, these changes will affect your timing and even your mechanics, perhaps without you even realizing it.
What does swing weight mean?
Swing Weight. Swing weight isn't an actual weight so much as a comparison of the difference in weight between the club head and the butt end of the shaft. It's expressed as a letter-number combination, such as C9 or D2. Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy ...
Can you use extenders to lengthen a golf club?
However, using extenders to lengthen a club will change the flex of the club, sometimes by an unpredictable amount. Not only does the shaft become more flexible than before, thus further affecting accuracy, but it lowers the kick (or bend) ...
Does lengthening the shaft make the club head heavier?
Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy for you, which will slow down your swing speed and actually reduce your distance.
Does lengthening a golf club shaft affect accuracy?
Accuracy. As a general rule, lengthening any club's shaft will reduce your accuracy with that club. The longer the club, the more difficult it becomes to hit the ball solidly. This is especially true when the ball is on the ground rather than on a tee, since hitting the ball fat is more likely.
Is shaft length a factor?
Shaft length is certainly a factor in how far you hit a given club. However, some clubs benefit more than others. Installing longer shafts in wedges and short irons will almost always result in more distance, as most players have little trouble swinging the shorter clubs.
Do golf clubs have longer shafts?
Effects of Lengthening a Golf Club Shaft. Tall players like Bubba Watson have to use longer shafts in all of their clubs. Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to lengthen your shafts.
How to tell if a golf club is flat?
To show this you need to be hitting off a lie board, and checking the marks on the sole of the club. If the marks on the sole of the club are toward the toe, then the club is flat, adding length as explained above, or bending upright will fix this, whichever is more comfortable for you.
How to lie a golf ball?
Fitting for lie- Better than using a lie board is a method known as the “ink line on the back of the ball” technique. With a Sharpie pen put a thick, heavy ink line on the ball. Position the ball so the line is vertical, facing the clubhead as it would come into impact. Best to put it on a very short tee on close mown grass like on a par 3 hole so no grass can come between the ball and clubface. Hit the shot and look for a faint transfer of the ink line to the clubface. If the ink line is perfectly vertical/perpendicular to the scorelines, the lie is correct for the golfer at that length. If the line tilts so the top of the line is more toward the toe end of the head, the lie at present is too upright and needs to be flattened. Vice versa if the ink line is angled to the top of the line is toward the heel side of the face the lie is too flat and needs to be more upright. Subsequent hit testing with the ink line after bending verifies the change.
How far apart should I put my golf clubs?
The old school standard was 1 deg between irons for every 1/2 inch length change. Nowadays, the 5-PW are 1/2 degree apart and the spacing on the long irons is 1 deg. If you go to www.golfspyder.com, it lists the industry standard lie angles. Ping uses 3/4 deg between clubs. Callaway is 1/2 degree flatter than Titleist or Taylor Made. When you go longer you flatten the lie angle and shorter you upright it. I have my 4-9 spaced 1/2 deg apart (from 61.5 to 64). All my wedges are 65 deg. The 4 iron lie angle also corresponds to Ping Yellow Dot.
Does bending a golf club upright flatten the lie angle?
bending the club upright has nothing to do with compensating for a .5 inch longer shaft, if you were compensating for a longer shaft then you would flatten the lie angle.
Do you need to increase the lie angle of a 7i?
So if the standard lie angle of your previous 7i was 62* and the standard lie angle of the proposed 7i is 61*, then yes you would need to increase the lie angle 1*.
Does bending a golf club upright compensate for a longer shaft?
bending the club upright has nothing to do with compensating for a .5 inch longer shaft, if you were compensating for a longer shaft then you would flatten the lie angle. bending the club upright to compensate for shaft length, would be for a shorter shaft, not a longer shaft. ...
Support TST Affiliates
Use the code "iacas" for 10% off Mevo after clicking this link. For Mevo+, click this link or the image above.
Posts
Hi Everyone, I was wondering what result anybody has had using two different swing methods at once. One for swinging an iron and another for the driver. Maybe someone on this forum has tried this. For example, using a single plane swing for...
What does it mean when a golfer reduces the lie?
Reducing the lie would mean the sole of the club would hit the ground closer to the heal. This, as I undrstand it, could cause the face to close making your shot go left. But I am no expert either
How many degrees should a golf club lie?
Conversely if your new club was 38" long, lie angle needs to drop to 60.5 degrees.
How to set a 37.75 shaft?
If you remember your schoolboy trigonometry about right angled triangles, and assuming that the club is grounded normally, your 37.75" shaft will place the end of the grip x inches vertically above the ground. If you keep the same lie angle but with the 37.5" shaft then the end of your grip will be (x minus a little bit) inches vertically above the ground. If you don't change the height of your hands at address then in order for the club to get back to the ground you will have to stand it slightly more upright (on its toe) to make up the missing distance. Alternatively you bend over a little more to drop your hands a fraction. Or you have the club bent slightly more upright to make up the difference and keep the sole flat, but that only happens if you put it in a loft and lie machine and attack it with a bending bar (or put it in a vice and clump it with a mallet if your name is Ping!); it does not happen by changing shaft lengths.
How to tell if a lie board is flat?
Hitting off a lie board is a good way of testing how your lie angles are, the other is to read your divots. If they are deeper at the toe and you tend to go right in the air (right hander) then your clubs are probably too flat and need tweaking more upright, heel deep divots and moving left in the air, clubs are too upright and need flattening off.
What happens if you don't change your hands at address?
If you don't change the height of your hands at address then in order for the club to get back to the ground you will have to stand it slightly more upright (on its toe) to make up the missing distance. Alternatively you bend over a little more to drop your hands a fraction.
Does the lie angle change if clubs are lengthened?
The lie angle will automatically change if clubs are lengthened.
Does the lie angle change if you lengthen your golf clubs?
The lie angle will automatically change if clubs are lengthened. Only slightly but it will change. There is no such thing as standard lie as all the manufacturers generally are different. The lie angle that is correct for you can only be tested dynamically - i.e. via a pro or fitter on a lie board hitting golf balls.