Utilizing the most exact bending machines in the industry, our PGA TOUR Superstore Certified club repair technicians can adjust your equipment to the exact loft and lie angle measurements required to help you play your best.
Full Answer
Can you change the loft and lie of your golf clubs?
When it comes to drivers and fairway woods also a lot of existing clubs are able to have their loft and lie changed because the head will not be able to handle a bend to the hosel.
What is loft in golf clubs?
Loft is the angle of the club face that controls trajectory of the golf shot and affects distance. Stronger or weaker lofts can lead to higher, lower, longer, or shorter ball flights. The standard loft on manufactured golf clubs varies from brand to brand.
What is the best loft for an iron?
Tiger Woods serves as the standard for traditional iron lofts. His PW is 50 degrees, his 7I is 36, and his 3I is 22.5. If we look at the most traditionally-lofted modern sets (blades), we see a slight change from this.
What can you change on a set of golf clubs?
We have run through the list of things that you can get changed on clubs you have already bought – grips, lofts, lies, shafts, lengths etc – through a custom fitting. But even if the limitations which we’ve already discussed don’t apply to your set and all your changes are possible there’s always the main element to consider.
How much does it cost to replace loft on irons?
Getting the loft and lie angle checked is going to run you anywhere from $2-$5 per club, depending on the amount of work needed. It's a relatively inexpensive tune-up that'll save you some massive headaches once the season kicks into gear, whenever that might be.
Can I change the loft on my irons?
The 2-degree limit is only recommended when changing the lofts on irons due to the potential effect such bends will have on the sole angle of the club. If the hosel design and manufacturing processes allow it, the lie of an iron can be bent 3-4 degrees or more with no compromise to the integrity of the head.
How much does it cost to adjust a loft and lie?
PricingAdjust loft/lie irons$5.00 per clubAdjust loft/lie putter$7.50 per club
How do you change the loft on a golf club at home?
4:376:07But now you can see it's angled pretty far forward but now what i can do here is take my bending barMoreBut now you can see it's angled pretty far forward but now what i can do here is take my bending bar. And slip it over here. And then tighten it down a little here.
How much does it cost to adjust irons?
A golf club's lie angle adjustment cost should be about $5.00 per club. When you go in for a lie angle adjustment, make sure that you ask if the repair shop will charge for the set of irons or for each individual club. Most places charge by the club.
How much does it cost to Deloft a club?
How Much Should I Deloft Irons? No more than 2-4 degrees. If your divots are deep and your trajectory is varied then you are delofting too much.
How much does it cost to change a lie angle on an iron?
$3 to $5 per clubThey normally charge $3 to $5 per club to make adjustments, so this could save you some cash if you can get them to throw it in.
How much does it cost to have golf clubs adjusted?
On average it costs between $250 and $600 to get a full bag of golf clubs fitted. Driver only fittings typically cost from $50 to $175 as do 'irons' fittings. Wood/Hybrid and wedge custom fittings can be cheaper at $40 to $150 but golf club fitters will often 'refund' fitting costs if you buy clubs afterwards.
What loft should my irons be?
What Degree Loft Should Your Irons Be? There is no official loft angle assigned to each iron largely because specific clubs vary from each manufacturer. In the longer irons a three-iron usually comes in at around 20 degrees, a four-iron at roughly 25 degrees and a five-iron at 29 degrees of loft.
Does changing loft affect lie?
As you change the loft and the face angle, you will also change the lie unless there is a separate setting to alter the lie independently of loft. Loft changes the ball flight vertically and lie changes the ball flight horizontally.
How much does 1 degree of loft affect distance?
Given that you're at your maximum clubhead speed, just 1-degree change in the loft angle of a golf driver can affect your driving distance by 2-4 yards. As for irons, the difference in distance between 8-iron (37-39 degrees) and 9-iron (41-43 degrees) is usually 10-15 yards.
Can golf irons be adjusted?
Golf irons can be adjusted for loft, lie, and length. These three adjustments are often necessary in order to ensure that clubs fit your swing and are giving you the best results. A professional club fitter can easily make these adjustments for you.
What happens when you strengthen loft on irons?
The short answer: When you hear a reference to stronger lofts or strengthening lofts, it means reducing the loft angle of your club or clubs in order to add distance and/or lower trajectory. The loft of golf clubs is expressed in degrees (18 degrees, 27 degrees, 38 degrees, whatever the case may be).
How much does 1 degree of loft affect distance?
Given that you're at your maximum clubhead speed, just 1-degree change in the loft angle of a golf driver can affect your driving distance by 2-4 yards. As for irons, the difference in distance between 8-iron (37-39 degrees) and 9-iron (41-43 degrees) is usually 10-15 yards.
Does changing loft affect lie?
As you change the loft and the face angle, you will also change the lie unless there is a separate setting to alter the lie independently of loft. Loft changes the ball flight vertically and lie changes the ball flight horizontally.
Does changing loft change face angle?
When you lower the loft of a golf club, you are also going to close the angle of the clubface. If you increase the loft on a club, you will open the face angle on the club. This applies when you are adjusting loft on the driver as well as irons or hybrids.
What are some of the facts about club adjustment?
Here are some of the facts, and fallacies, about club adjustment. 1. A manufacturer’s new set of clubs doesn’t guarantee accuracy. While golf club manufacturers certainly try to make a consistent product, there are often inconsistencies in the lofts and lies of the clubs and they may not be progressively consistent from one club to another .
How to improve golf ball flight?
Using a club bending machine to change the angle on a golf club is among the fastest ways to improve a player’s ball flight. Whether it’s changing the lie to improve accuracy or changing loft to make sure that the player’s clubs are progressively consistent, angle bending is a major factor in club performance.
How many degrees can you bend an iron?
If the hosel design and manufacturing processes allow it, the lie of an iron can be bent 3-4 degrees or more with no compromise to the integrity of the head.
Can metal wood be bent?
Even with limitations, many of today’s metal woods are indeed bendable, especially stainless-steel head s. Forged titanium models are bendable as well due to their softer titanium structure. And provided the hosel of the wood is long enough to allow the bending bar to fit over its length, metal woods can be bent to custom-fit a player. This applies to both face angle and lie.
What is loft and lie adjustment?
Loft and lie adjustment involves the use of specially-designed equipment and a great deal of experience. Golf Galaxy Certified Club Technicians use methods and procedures to bend golf clubs as described by The GolfWorks. We have the knowledge and science to meet your individual loft and lie specifications.
What to do if your golf shaft is broken?
If your shaft is broken or doesn't fit your swing, you can have it removed by a Golf Galaxy Certified Club Technician. We have the tools to remove graphite or steel shafts without damaging other components of your golf club.
What to do if your club head is loose?
If your club head is loose or has become unattached from the shaft, don't go buy a new club. Golf Galaxy's Certified Club Technicians can install the head correctly and re-epoxy the head so it is returned to a like-new state.
Do iron lofts get stronger?
Iron lofts have been getting stronger for several years, thanks to the OEM's distance wars. Many of them want to claim the title of "the longest irons", so shafts get longer, and lofts get stronger.
Can you change your wedge for gaping?
You may need to alter your wedge setup for proper gaping.. You could also need to add or remove a hybrid based on the strong lofted longer irons as well . Don't make an iron purchase that causes you to change the rest Of your bag. The iron purchase should flow with the bag or it's not a smart purchase.
Feedback
By adding loft, you won't be creating dig soles, that stems from delofting.
Feedback
Bending them 2 degrees weak would add 2 degrees of bounce. Whether that would be a detriment would depend on your swing and the conditions you play in. Probably the best test would see if a fitter/shop would let you bend a demo iron 2 degrees weak and take it to the course.
Feedback
Previous posts are correct. You would be adding bounce which should help them dig less, not more. You will also be taking away some of the offset in the head. Tom Wishon says for a 2* increase in loft, you should see the offset reduced by 1.5 mm or .059 inches.
Feedback
Awesome! Thanks for the input, really appreciate it. A little more bounce and less offset is always good imo. I think I will definitely be adding 1-2° to the 4-9 depending on the club, that way I can keep my 21° 7-wood in the bag!
Feedback
I would do (ZX5) 4i from 22 to 23, and zx7 5i from 25 to 26. The reason is for better gaping between 4i, 5i, and 6i.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
What to notice about lofts in golf?
In addition to realizing how strong lofts have gotten over time, the other thing to notice is the lack of standards in the golf industry . You can walk into a store and try two different 6 irons that are going to be a club to a club-and-a-half different!
Why are lofts so strong?
They will tell you that because the center of gravity (CoG) is so low in modern clubs, they need to make the lofts strong to create playable trajectories. This explanation has never held water for me.
What are the most common changes to golf clubs?
Grip, loft and lie changes are the most common but the complexity and cost of retro-fitting a golfer’s current clubs increases as more changes are made, making the case for simply getting new clubs stronger. It seems simple enough.
What is custom fitting golf clubs?
The process simply aims to put golf clubs in your hand which have the best shaft, lie angle, loft, and grip to fit your physical dimensions, strength, stance and swing. Getting custom fitted for golf clubs can benefit any golfer regardless of playing ability ...
Why is weight important in golf?
Because weight matters a lot when it comes to golf clubs. Large differences in golf club weight can lead to vastly different shot results – ball speed, launch angles, spin rates, ball flight etc. So when the same player uses a different weighted club the distances and accuracy results can be very different.
Can forged irons be bent?
Although loft and lie adjustments are done frequently, particularly for regular players with forged irons where the soft metal can is more prone to bend over time, this is not always a very straight forward process. Not all irons are able easily to be bent and some of them not at all even by an expert club fitter.
Is a golf club a golf club?
A golf club is a golf club and if you don’t really want to give up your current set surely it makes sense to get changes made to your existing golf clubs to get the best of both worlds? The benefits of custom fitting but without the cost and hassle of getting a new set.
Can you bend cast iron for loft?
Other cast irons are simply not recommended to bend for loft and lie changes simply because they can break.
Can you change the grip on an old golf club?
The most straightforward element of an old club you can change is of course the grip. It’s very easy to identify poor grips at a custom fitting and get them replaced with ones that not only fit the size of your hands well but also feel better.