Golf-FAQ.com

where can i go to find information on adjusting the brakes on a 1976 harley 4 wheel golf cart

by Devyn Larkin MD Published 2 years ago Updated 2 years ago

How to adjust the brakes of an old style golf cart?

Adjusting the brakes of old style golf carts 1 Remove the wheel assemblies on both wheels 2 Release the parking brake of the brake pedal 3 Back off the adjusting rod of the brake cable so that there will be no tension along the arm of the shoe lever 4 Remove the brake drum

Do golf carts have brakes on all 4 wheels?

Most carts only have brakes on the rear wheels and not on all four. Golf carts can have different types of brakes like regenerative brakes, drum brakes and disc brakes. Knowing the parts of a golf cart brake system will help you understand how the brakes on golf carts work.

How do Dr drum brakes work on a golf cart?

Drum brakes are installed in the rear set of wheels of your golf cart and this drum braking system auto-adjusts the brake when you’re driving the vehicle. The auto-adjustment depends upon the degree of wear of the brakes. If the brakes are worn out beyond a point, the rear drum braking system brings the brake shoe and the drums in contact.

How do you replace the rear brakes on a golf car?

Lift the rear of the golf car and place the jack stands in a secure spot that will support the golf car. Remove both wheel assemblies. Release the brake pedal parking brake. Back off the brake cable adjusting rod, so there is not any cable tension on the shoe lever arm. Remove the brake drum.

How do you adjust the brakes on a golf cart?

0:125:17How to adjust club car golf cart brakes - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I did was I went ahead just loosen all the the wheel nuts took the wheel off and this isMoreSo what I did was I went ahead just loosen all the the wheel nuts took the wheel off and this is what you're gonna find underneath there.

Do golf cart brakes self adjust?

Many modern golf carts have self-adjustment brakes and do not require manual adjustment, but they do need a little bit of tweaking here and there. However, if you feel the brakes need adjustment, you can do so manually as well.

How do you know if your drum brakes are dragging?

1:044:41How to Test for Dragging or Sticking Brakes on Older Cars - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd look at this it'll hardly move so that's a real good test if you put hard on the brake pedal getMoreAnd look at this it'll hardly move so that's a real good test if you put hard on the brake pedal get out come this should move it may not spin freely but it'll you'll feel a little bit of drag.

How do you bleed the brakes on a golf cart?

3:034:49Bad Boy Buggy Garage - "Brake Bleeding & Service Adjustments"YouTubeStart of suggested clipEnd of suggested clipWe're gonna start the bleed process at the right rear corner. While Allen pumps up the pedal. I'mMoreWe're gonna start the bleed process at the right rear corner. While Allen pumps up the pedal. I'm gonna ask him to hold pressure on it I'm gonna then open up the bleeder screw.

How do you check golf cart brakes?

1:543:20How to Inspect Your Golf Cart's Brakes | Golf Cars Unlimited - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you will for your brakes wien visually inspect it and clean the brake drum. And shoe area.MoreIf you will for your brakes wien visually inspect it and clean the brake drum. And shoe area.

How do the brakes work on a golf cart?

E-Z-GO carts come with a self-brake adjusting mechanism. Drum brakes are installed in the rear set of wheels of your golf cart and this drum braking system auto-adjusts the brake when you're driving the vehicle.

How do you adjust motorcycle drum brakes?

1:103:59How to adjust the rear drum brake on a motorcycle - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo right now it's really loose and the way to tighten it up is to simply turn this nut clockwise.MoreSo right now it's really loose and the way to tighten it up is to simply turn this nut clockwise. You just take your 12 millimeter. And you just tighten that thing up. And basically you just go nuts.

How tight should drum brakes be adjusted?

1:187:34How To Adjust Your Drum Brakes - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's just kind of rubbing slightly. And to do that what you do is you adjust this little adjusterMoreIt's just kind of rubbing slightly. And to do that what you do is you adjust this little adjuster now these adjusters are supposed to be automatic.

Will drum brakes self adjust?

The good news is that brake drums are forgiving, and there's play built into the system. In a perfect world, drum brakes would self-adjust the way disc brakes do. In disc brakes, the caliper piston extends more and more as the pads wear.

Do you bleed brakes with the master cylinder cap on or off?

During brake bleeding, the master-cylinder cap should be left unscrewed but still in place atop the reservoir. Each brake must be bled in the correct sequence. Generally, you bleed the brake most distant from the master cylinder first, but some cars require a different order.

Why are my brakes still soft after bleeding?

Air in the brake line(s) is the most common cause of a soft/spongy brake pedal. If air gets into the brake lines, it can prevent brake fluid from flowing properly, causing the brake pedal to feel spongy or soft. If the brakes are soft or spongy, this is a good time to change or flush the brake fluid.

Can you bleed brakes from the master cylinder?

The master cylinder does not automatically bleed the air out of the piston when you fill it, this has to be performed “on the bench”, in other words, out of the vehicle. You can bleed it in the car, but it takes longer and requires two people- one to watch for bubbles and one to push the brake pedal.

How to adjust brakes on a golf cart?

Here are the steps in adjusting the brakes: Turn off the power of the golf cart. Don’t set its parking brake. Put the brick or blocks in front and behind each of the front wheel of the golf cart to prevent it from rolling. Get the floor jack into position at the rear of the golf cart.

Why is it important to adjust the distance of travel on a golf cart?

It is important to adjust this distance of travel to make sure that the brakes are working properly. If there is too much travel distance, the braking capacity or power of the golf cart will be reduced. But if the distance is too short, the brakes may not release fully. So adjustments are necessary in both cases.

How to remove lug nuts on a car?

Use the socket wrench to loosen the lug nuts on the rear wheels. Remove the nuts and the wheels and set them aside. Remove the rubber boots on the underside of the wheels and the brake adjustment screw will be exposed. Pull these rubber boots away from the wheels by using your hands.

Do golf carts have brakes?

As in ordinary vehicles, golf carts have brakes. If you notice that the brakes are not functioning well, they need to be adjusted. Here are some of the ways by which you can adjust the brakes of different types of golf carts. This is also part of the golf cart maintenance checklist that we’ve created. Contents [ show]

Is it safe to drive a golf cart?

Just like any vehicle, safety is very important in driving a golf cart. If not properly handled a golf cart could also cause accidents, although not as serious as the accidents caused by bigger cars and trucks. Nevertheless, you should also know how to safely drive and operate a golf cart. As in ordinary vehicles, golf carts have brakes.

Do old golf carts have low switches?

Some of the old style golf carts may have run/low switches. These switches should be shifted to the tow position before disconnecting their battery packs. Lift the back of the golf cart and put the floor jack in a secure section of the cart which should provide it a stable support.

How to fix a sticky brake on a golf cart?

You can also fix sticky brakes by following the steps given below. Take off the brake pedal from the golf cart. Drill out the bushings and the pedal assembly using a 3/4-inch drill bit. Drill the frame at the point where the pedal is mounted using a 1/2-inch bit.

How to adjust brakes on a G29 golf cart?

The brake adjustment of a G29 golf cart can be done in the following ways. Apply mild hand pressure on the brake pedal. This will give a yield of 1 to 1.75 inches on the pedal. If you don’t get this yield, it’s likely that the brake cable has stretched out and needs to be replaced.

Why does my brake line keep dragging?

The locking or dragging could also be due to rusting of the collar, bolt, return spring or bushings of the pivot assembly. Cleaning up the rust may work. Attending to damaged brake cables and linings under the drums also help.

How to adjust brakes on a Yamaha G2?

How to adjust Yamaha G2 Golf Cart Brakes: Remove the brake shoes and check if the adjuster moves backward and forward. Clean the adjuster star wheel well so that it spins without a glitch. Remove the pins that connect the brake cable to the brake arm behind the brake backing plate.

Why do golf cart brakes lock up?

Golf cart brakes can start locking up when the brake cable gets stuck, or when the bolts on the lift kit are loose. The brake cable gets stuck because of a binding, resulting in a mechanical linkage. One or more parts of the pivot assembly have rusted. There’s wear and tear of the brake drum, brake shoe, brake cable or brake spring.

Why is my cart locking?

If both the wheels are locking, it’s often because there is a binding on the main brake cable that results in the mechanical linkage. This will cause the main cable to get stuck. If your cart has hydraulic brakes, the master cylinder may have gone bad. You may try loosening the brake cable or the line at the wheels.

Why are my brakes sticky?

The brakes are often sticky because they are worn out or out of adjustment. If the brake shoes under the drums are damaged, do a replacement. Sometimes, applying chain lube can help to release the stickiness of the brake. However, do this after you clean the brake from the top lift carpet using a pressure washer.

Why do brakes move farther?

As the brake shoes wear, the distance between the shoe and the drum increases. This causes the brake pedal or parking brake lever/pedal to move farther before the shoes make contact with the drum. Adjustment of the Ford drum brake system is well within the average home mechanic's ability.

How to turn star wheel?

Turn the star wheel with the brake-adjusting tool, until the shoes contact the drum. The shoes should not be so tight that the drum cannot turn, but there should be a slight drag on the drum as it is turned. Reinstall the wheels and lower the vehicle.

How to stop a car from moving when the rear wheels are off?

Step 1. Place wheel chocks behind the front wheels to prevent vehicle movement when the rear wheels are off. Raise the rear of the vehicle with the floor jack, and place jack stand under the frame. Lower the vehicle onto the jack stands to support the weight of the vehicle. Never rely on the floor jack alone to support the vehicle.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9